Instruction/ maintenance manual of the product P1WAMR CompuSTAR
Go to page of 18
1 WWW.COMPUSTAR.COM This device complies w ith Part 15 of the FCC rules. Operation is subject to the following conditions; (1) This device may not cause harmful interference. (2) This device may accept any interference received, including interference tha t ma y cause undesired operation.
T able Of Content s Kit(s) Contents ............................................................................................................................... ........... 3 Warranty Coverage .......................................................
Introduction Introduction Thank you for purchasing a CompuStar Pro system for your vehicle. In order to truly enjoy the benefits of this system, we recommend that you fully review the following manual.
Remote Reference Remote Reference P1WAMR (1 Way AM) Applicable to the following models; - P1WAM-AS (alarm and remote start) - P1WAM-A (alarm w/out remote start) - P1WAM-S (remote start w/out alarm) P1.
Quick Reference Quick Reference Valet Mode Valet Mode When servicing or loaning your vehicle to others, the CompuStar Pro system should be in Valet mode. Valet mode prevents the system from remote starting and disables all alarm functions. IMPORTANT: While in Valet mode the CompuStar will st i ll lock and unlock power lock systems.
1 Way Remote Button Functions Button Duration Additional Programming Required Function / Description 0.5 seconds no Lock/Arm 3.5 seconds no Panic/vehicle loca ter (flashes vehicles parking lights and sounds siren and horn). 0.5 seconds no Unlock/Disarm 0.
General System Functions General System Functions The remote transmitter functions have been predetermined and programmed from the factory. The four button configuration allows for many functions to be performed through a series of tapping, holding and / or multiple presses of buttons.
IMPORTANT: Your vehicle’s key must be inserted into the ignition and turned to the “on” position prior to driving your vehicle. If the foot brake is depressed prior to t he key being in the “on” position, the vehicle will shut off.
Trunk Release Hold button for 2.5 seconds to release the trunk or hatch. If you are in range, the vehicle’s parking lights will flash once and/or siren chirp once indicating th at the trunk release command has been successfully transmitted. IMPORTANT: Trunk release is an optional vehicle feature that may require additional parts and labor.
Advanced System Functions Advanced System Functions The following section reviews advanced system functions. Many of these functions require multiple steps or additional programming by your local authorized CompuStar dealer to be active. The following section reviews advanced system functions.
STEP 1: Turn on Option 3-10-III. (Dealer programmed option) TEP 2: Turn ignition key to the “on” position. TEP 3: Hold down the valet switch for 1.
Remote Coding / Programming Routine(s) Remote Coding / Programming Routine(s) IMPORTANT: Every CompuStar Pro remote must be coded to the system prior to performing any operations. All remotes must be coded at the same time. IMPORTANT: Every CompuStar Pro remote must be coded to the system prior to performing any operations.
Remote S tart Error Dia gnostic gnostic If the remote start fails to start the vehicle, the parking lights will flash thr ee times immediately. Following those three flashes the parking lights will flash again correspo nding to the error table. If the remote start fails to start the vehicle, the parking lights will flash thr ee times immediately.
Limited Lifetime W arranty Firstech, LLC Warrants to the original purchaser that this product shall b e free of defects in material and workmanship under normal use and circumstances for the period of.
Notes: ___________________________________________________________________________________ ___________________________________________________________________________________ _________________________.
___________________________________________________________________________________ ___________________________________________________________________________________ ________________________________.
17.
www.compustar.com Toll Free: 888-820-3690 21911 68 th Ave S Kent, WA 98032 18.
An important point after buying a device CompuSTAR P1WAMR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought CompuSTAR P1WAMR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data CompuSTAR P1WAMR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, CompuSTAR P1WAMR you will learn all the available features of the product, as well as information on its operation. The information that you get CompuSTAR P1WAMR will certainly help you make a decision on the purchase.
If you already are a holder of CompuSTAR P1WAMR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime CompuSTAR P1WAMR.
However, one of the most important roles played by the user manual is to help in solving problems with CompuSTAR P1WAMR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device CompuSTAR P1WAMR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
