Instruction/ maintenance manual of the product RIOP HSSI-10/100 Compatible Systems
Go to page of 17
HSSI-10/100 RIOP Installation Guide Comp atible Systems C orporati on 4730 W alnut Street Suite 1 02 Boulder , Co l or ad o 80301 303- 444- 9532 800- 356- 0283 http://www.
HSSI-10/100 RIOP Installation Guide, V ersion 1.0 Copyright© 1999, Compatible Systems C orporation All rights reserved. VSR, VSR-2, MicroRouter and CompatiV iew are trademarks of Compatible Systems Corporation. Other trademarks are the proper ty of their respective holders.
Table of Contents i 1 Introduction to the HSSI-10/100 RIOP 2 Chapter 1 - Network Installation 3 Conne cting the HSSI -10/100 to the E thern et 3 Conne cting the HSSI- 10/100 to a T3 Line C ommu nicati.
Table of Contents ii IP Prot ocol 9 Required for IP Numbere d Interface 9 Required for IP Unn umbered Interface 9 Suggested fo r IP 10 IPX Pr oto col 10 Required for IPX 10 Suggested fo r IPX 10 Apple.
1.
Introduction to the HSSI-10/100 RIOP 2 Introduction to the HSSI-10/100 RIOP The HSSI- 10/100 Rou ting Input /Output Processor ( RIOP), as p art of t he VSR mult igigabit switching router , allows you to connect a local Ether net and remote cor porate network.
Chapter 1 - Network Instal lation 3 Chapter 1 - Network Installation HSSI-10/100 RIOP Front Panel This section of the manual will help you in stall th e HSSI-10/100 RIOP to connect a local Ethernet and rem ote corporate network. These conn ections can be made to other Compatible Systems routers or rout ers from o ther vend ors.
Chapter 1 - Network Instal lation 4 T o connect the HSSI port on the HSSI-10/100 mod ule to a T3 (or ot her HSSI-based) CSU/DSU, first make sure that b oth units are powered of f.
Chapter 2 - Quicks tart Configuration 5 Chapter 2 - Quickstart Configuration This chapter briefly discusses the major parameters that must b e set in order to use the HSSI-10/100 RIOP as p art of your VSR m ultigigabit switching rou ter .
Chapter 2 - Quicks tart Configuration 6 Suggested fo r IP These parameters h elp supply infor mation about the segmen t that the interface is conn ected to.
Chapter 2 - Quicks tart Configuration 7 Suggested fo r DECnet Setting the parameters abo ve s hou ld be adequ ate for most installations . W AN Interface Configuration In order to use the W A N interface , you may want to set some physical parameters.
Chapter 2 - Quicks tart Configuration 8 TB : Use configure and set either the R IPV ersion keyword or th e OSPFEnabl ed keyw ord in the IP W AN 0 section. Add static rou t es and a default ro uter in the IP S ta ti c section. v No te: Due to the complexity of BGP , configuration parameters for BGP ar e no t given in this Quickstar t.
Chapter 2 - Quicks tart Configuration 9 Frame Relay Configuration This section covers the settings requ ir ed for Fram e Relay operation of the HSSI W AN inter- face. Link Config uration Required for Dedicated Line Operation This is the only mode of operation supported via the built-in HSSI CSU/DSU.
Chapter 2 - Quicks tart Configuration 10 Suggested fo r IP These parameters h elp supply infor mation about the segmen t that the interface is conn ected to.
Chapter 2 - Quicks tart Configuration 1 1 DECnet Protocol Required for DE Cnet In order t o be used, D ECnet must be turned on both globally and fo r a particular port. W AN interfaces which are se t for Frame Relay operation do not need an y additional parame- ters se t in order to functi on.
Chapter 3 - Shipping Def aults 12 Chapter 3 - Shipping Defaults Ethernet Interface IP Routing Defa ults • On • Addr ess: 198. 41.12 .1 • Subnet Mas k: 255.255.2 55.0 • Broadcast Address: 198.41. 12.255 • IP RIP of f IPX Routing D efaults • 802.
Chapt er 4 - LED Pat terns 13 Chapter 4 - LED Patterns Some of the LEDs on the front of the VSR multig igabit switching router serve dual functions. In addition to i ndicating certain ro uter-wide o perating conditions and they may also display port-specifi c informat ion.
An important point after buying a device Compatible Systems RIOP HSSI-10/100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Compatible Systems RIOP HSSI-10/100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Compatible Systems RIOP HSSI-10/100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Compatible Systems RIOP HSSI-10/100 you will learn all the available features of the product, as well as information on its operation. The information that you get Compatible Systems RIOP HSSI-10/100 will certainly help you make a decision on the purchase.
If you already are a holder of Compatible Systems RIOP HSSI-10/100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Compatible Systems RIOP HSSI-10/100.
However, one of the most important roles played by the user manual is to help in solving problems with Compatible Systems RIOP HSSI-10/100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Compatible Systems RIOP HSSI-10/100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
