Instruction/ maintenance manual of the product GC 3 Aga Ranges
Go to page of 11
file:///D:/System/DATA/Dx/ds1/Us/iss1/EINS512426/EINS512426.htm 09/05 EINS 512426 GC 3 (THREE OVEN) Installation Instructions PLEASE READ THESE INSTRUCTIONS BEFORE USING THIS APPLIANCE INSTALLER: LEAVE THESE INSTRUCTIONS WITH THE APPLIANCE. CUSTOMER: KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
file:///D:/System/DATA/Dx/ds1/Us/iss1/EINS512426/EINS512426.htm TECHNICAL SPECIFICATION INSTALLER SERVICING INSTRUCTIONS - GC3 (THREE OVEN) YEARLY SERVICE INSTALLATION NOTE: THESE INSTRUCTIONS SHOULD BE LEFT WITH THE APPLIANCE AND THE USER TO RETAIN FOR FUTURE REFERENCE.
file:///D:/System/DATA/Dx/ds1/Us/iss1/EINS512426/EINS512426.htm Fig 1. Open Flue Model GC3 DESN 512843 Fig 2. Section Through Downdraught Diverter A VENT CONNECTION A 100mm (4in) Type B Gas Vent must be used and fastened by screw to the draft hood flue collar.
file:///D:/System/DATA/Dx/ds1/Us/iss1/EINS512426/EINS512426.htm U.S. The gas vent must be connected to a chimney or independently and in accordance with Chapter 26, chimney, Gas Vent and Fireplace Systems of the current issue of Equipment and Volume of the ASHRAE Handbook.
file:///D:/System/DATA/Dx/ds1/Us/iss1/EINS512426/EINS512426.htm Fig 3. WALL TILING If the cooker is to stand in a recess or against a wall which is to be tiled in no circumstances should the tiles overlap the range top plate.
file:///D:/System/DATA/Dx/ds1/Us/iss1/EINS512426/EINS512426.htm Fig. 4 - Model GC3 Open Flue DESN 512430 LOCATION OF NAME PLATE The model and serial numbers for this appliance are found on the data plate. These numbers must be used when requesting advice from your Aga Distributor.
file:///D:/System/DATA/Dx/ds1/Us/iss1/EINS512426/EINS512426.htm (See Fig. 8 ). REPLACEMENT PARTS In the event of component failure, which requires replacement, contact your local Aga Distributor who will advise and supply the necessary replacement.
file:///D:/System/DATA/Dx/ds1/Us/iss1/EINS512426/EINS512426.htm Fig. 5 DESN 512439 Fig. 6 Aga Gas Cooker - All Models DESN 510818 file:///D:/System/DATA/Dx/ds1/Us/iss1/EINS512426/EINS512426.
file:///D:/System/DATA/Dx/ds1/Us/iss1/EINS512426/EINS512426.htm Fig. 7 DESN 512440 Fig. 8 DESN 512431 INSTALLER SERVICING INSTRUCTIONS - GC3 (THREE OVEN) It is recommended that the range be serviced at regular annual intervals. Arrange with the householder that the range has been turned OFF the night before to ensure it is cold upon arrival.
file:///D:/System/DATA/Dx/ds1/Us/iss1/EINS512426/EINS512426.htm 1. Isolate the gas supply by turning off the service gas valve beneath the combination gas valve. Break the hexagon union connection nut. (See Fig. 7 ). 2. Detach inner burner fixing screws (See Fig.
file:///D:/System/DATA/Dx/ds1/Us/iss1/EINS512426/EINS512426.htm 110 Woodcrest Road Cherry Hill NJ 08003 800.633.9200 www.aga-ranges.com file:///D:/System/DATA/Dx/ds1/Us/iss1/EINS512426/EINS512426.
An important point after buying a device Aga Ranges GC 3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aga Ranges GC 3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aga Ranges GC 3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aga Ranges GC 3 you will learn all the available features of the product, as well as information on its operation. The information that you get Aga Ranges GC 3 will certainly help you make a decision on the purchase.
If you already are a holder of Aga Ranges GC 3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aga Ranges GC 3.
However, one of the most important roles played by the user manual is to help in solving problems with Aga Ranges GC 3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aga Ranges GC 3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
