Instruction/ maintenance manual of the product LC8T Coleman
Go to page of 8
TECHNICAL GUIDE Echelon MODELS: FC8T/LC8T GAS-FIRED HIGH EFFICIENCY TWO ST AGE UPFLOW/HORIZONT AL FURNACES ST ANDARD & LoNOx 80% AFUE NA TURAL GAS 60 - 120 MBH INPUT Due to continuous pr od uct improvement, sp eci fications are subject to change without n otice.
036-21603-002 Rev. A (1004 ) 2 Unitary Products Group A 40 26-3/4 1-3/8 1-1/4 C FRONT BOTTOM IMAGE RETURN END TOP IMAGE SUPPL Y END LEFT SIDE RIGHT SIDE D 20 30-1/8 14-3/4 5-3/8 (VENT CONNECTIONS) POWER WIRING 7/8” HOLE 2-1/2 ACCESS WIRING 7/8” K.
036-21603-002 Rev. A (1004) Unitary Products Group 3 Annual Fuel Utilizat ion Efficiency ( AFUE) numbers are determined in accordance with DOE T est procedures. Wire size and over current protection must comply wi th t he Na tional Electri cal Code (NFP A-70-latest edition) and all local code s.
036-21603-002 Rev. A (1004 ) 4 Unitary Products Group NOTES 1. Airflow expressed in st andard cubic feet per mi nu te (CFM) and in cubic meters per minute (m 3 /min). 2. Motor voltage at 1 15 V . * Input / CFM / Cabinet Widt h (A=14-1/2, B=17-1/2, C=21, D=24- 1/2).
036-21603-002 Rev. A (1004) Unitary Products Group 5 NOTES 1. Airflow expressed in st andard cubic feet per minu te (CFM) and in cubic meters per minute (m 3 /min). 2. Return air is through si de opposite motor (lef t side). 3. Motor voltage at 1 15 V .
036-21603-002 Rev. A (1004 ) 6 Unitary Products Group FIL TER PERFORMANCE The airflow capacity data published in the “Blower Perfor- mance” table listed above represents blower performance WITHOUT filters.
036-21603-002 Rev. A (1004) Unitary Products Group 7 ACCESSORIES PROP ANE (LP) CONVERSION KIT - 1NP0480 - All units This accessory conversion kit may be used to convert natural gas (N) units for propane (LP) operation. Conve rsions must be made by qualified distributor or dealer personnel.
Subject to change without notice. Printed in U .S.A. 036-21603-002 Rev. A (1004) Copyright © by York International Corp. 2004. All righ ts reserved. Supersedes: 036-21603-001 Rev.
An important point after buying a device Coleman LC8T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Coleman LC8T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Coleman LC8T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Coleman LC8T you will learn all the available features of the product, as well as information on its operation. The information that you get Coleman LC8T will certainly help you make a decision on the purchase.
If you already are a holder of Coleman LC8T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Coleman LC8T.
However, one of the most important roles played by the user manual is to help in solving problems with Coleman LC8T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Coleman LC8T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
