Instruction/ maintenance manual of the product 9992-645 Coleman
Go to page of 32
Gas Barbecue Use, Car e & Assembly Manual W ith Grill Lighting Instructions 8300 Series Model No. 9992-645 (LP Gas) ASSEMBLER/INST ALLER: Leave these instructions with the consumer . CONSUMER/USER: Read all instructions and keep in a safe place for future r eference.
2 DANGER • FOR OUTDOOR USE ON L Y . NEVER operate grill in enclosed areas, as this could lead to gas accumulating from a leak, causing an e xplosion or a carbon monoxide buildup which could result in injur y or death. DO NO T use in garages, breez ewa ys, sheds or any enclosed area.
3 • Installation must conf or m with local codes or , in the absence of local codes, with either the National Fuel Gas Code , ANSI Z223.1 (USA), Natur al Gas and Propane Installation Code, CSA B149.1 (Canada), or Propane Stor age and Handling Code, CSA B149.
4 Longer detachable po wer-supply cords or extension cords m ust be used with care. The marked electrical rating of the cord set or e xtension cord must be at least as great as the electrical rating of the appliance. If the appliance is of the grounded type , the e xtension cord should be a grounding-type 3-wire cord.
5 DANGER • DO NO T inser t any f oreign objects into the valve outlet. Y ou ma y damage the valve . A damaged valv e can cause a leak, which could result in e xplosion, fire, sev ere personal injur y or death.
6 W ARNING Handle a full cylinder with care. Gas is under high pressure . DANGER • NEVER store a spare L.P . gas supply cylinder under the grill body or inside the grill enclosure or in the vicinity of any heat producing appliance. (Fig. 3) • NEVER fill the cylinder bey ond 80% full.
7 1 3 4 6 7 8 9 10 11 2 1. Grill Hood 2. Ther mometer 3. Hood Handle 4. Control Knob: Side Bur ner 5. Right Side Shelf 6. Electronic Igniter : Main, Side, and Rear Infrared Burner . 7. Conv ection V ents 8. Car t with Doors 9. Control Knobs: Main Bur ners 10.
1 4 2 8 9 10 19 17 15 1. 9992-4131 Hood Assembly w/Logo Plate 2. 9992-1 1 1 1 T emperature Gauge Only 3. 9992-4141 Hood Handle Assembly 4. 9992-1301 W arming Rack 5. 9992-4071 Back IR Electrode Assembly 6. 9992-1 101 Universal Igniter Wire (60" Wire) 7.
Replacement Parts List — 8300 Series 27 34 28 40 39 22 33 35 20. 9992-121 1 Side Shelf Left (Condiment T ray) 21. 9992-4421 Main V alve and Manifold Assy (LP) 22. 9992-1501 Back IR Knob 23. 9992-1491 Main Knob (Large) 24. 9992-1271 Main Bezel 25. 9992-1261 4 Pole Igniter 26.
Grill Assembly — 8300 Series 10 1. Place a piece of styrof oam from the packaging in the grill to leav e the gr ill hood propped open slightly (Fig. 6). 2. P osition the side shelf hooks with the slots on the side of the grill, near the back (Fig. 7).
11 Grill Assembly — 8300 Series IMPORT ANT : Remove all pr otective plastic film from stainless steel parts prior to assembly/use. This film is installed at the factory to prevent damage that could occur during shipment and handling.
12 Grill Assembly — 8300 Series 1. Inser t the row of f our heat tents with the triangle r idges f acing up (Fig. 19). Interior Parts Installation Fig. 19 Fig. 20 Fig. 21 2. Install the f our cooking grates on the ledges pro vided on the grill to create your cooking surf ace (Fig.
13 IMPOR T ANT! T O ENSURE PROPER GAS FLO W , BURNER CONTROL V AL VES MUST BE “OFF” BEFORE OPENING THE GAS CYLINDER V AL VE . W ARNING: During assembl y of the grill and when attaching or replacing the L.
14 1. Check that the cylinder v alve is closed b y tur ning the cylinder knob clockwise to a full stop . 2. Check that all the g r ill burner knobs are in the off position. 3. Remov e the protective caps from the cylinder v alve and coupling nut. NO TE: The coupling nut connects to the large outside threads on the valv e outlet.
15 NA TURAL GAS CONVERSION KIT (not sho wn) P ar t Number Description 9992-225 8300 Series LP to NG Conv ersion Kit Natural Gas Installation — 8300 Series NO TE: This step applies to you only if y ou are conv er ting your 8300 Series grill to use NA TURAL GAS .
16 DANGER T O P REVENT F IRE OR E XPLOSION H AZARD : • NO SMOKING. DO NO T use or per mit sources of ignition in the area while doing a leak test. • P erform leak tests outdoors only . • NEVER perf or m a leak test with fire or flame. Leak T esting • If you detect a leak: 1.
17 1. Regular ly check the b ur ner venturi tubes f or bloc kage from an insect nest. Read “Cleaning the V enturi” in the section titled “Care, Maintenance, and Cleaning”, and also the section titled “T roubleshooting”. 2. Check that all the b ur ner venturi [H] are set ov er the valv e outlets [J] correctly .
18 Lighting Main Burners Lighting Side Burner 1. Push and turn the side bur ner control knob countercloc kwise to the “HIGH” position. (Fig. 35) 2. Immediately press and hold the electronic igniter button (Fig. 35). Y ou will hear a snapping sound.
19 Using the Rotisserie — 8300 Series The grill rotisserie system is designed to cook items from the back using infrared heat. The rotisser ie b ur ner is an infrared type which provides intense searing radiant heat.
20 Lighting the Rotisserie Burner 1. Push and turn on the control knob for the RO TISSERIE BURNER counterclockwise to the “HIGH” position (Fig. 38 and 39). W ait 5 seconds. 2. Press and hold the electronic igniter button (Fig. 39). Y ou w ill hear a snapping sound.
21 Good Bad Y ellow Blue Holes in Bur ner Y ellow Blue Burner Control Setting Tips • The high flame setting is too hot f or direct cooking. The high flame setting is good f or quick searing of meat, then finish cooking on medium or low flame settings .
22 Direct Method: • The heat source is directly below the f ood. • Use f or browning meat or cooking hot dogs and hamburgers, but check f ood frequently . • Use f or skillet and stir-fr y cooking, but limit the amount of oil and heat to be used.
23 REPRESENT A TIVE ILLUSTRA TION Steps For Cleaning V enturi: 1. Remove the cooking gr ates and the heat tents and set aside. 2. Using a 1/4” he x nut driver , remove the self-tapping scre ws holding the front heat shield (Fig. 44 and 45). Set the front heat shield aside.
Replacing the Electr ode Module Fig. 49 Fig. 50 Fig. 51 Care, Maintenance and Cleaning (continued) Steps For Replacing the Electrode Module: 1. Remov e the cooking grates and the heat tents and set aside. 2. Using a 1/4” he x nut driver , remove the self-tapping scre ws holding the front heat shield (Fig.
CAUTION All cleaning and maintenance should be done only when the grill is cool & with the fuel supply tur ned off at the cylinder . If your g r ill is set up f or use with Natural Gas, turn off the gas supply at the system manual shut off v alve.
26 TYPE 1 CONNECTION ILLUSTRA TION Ther mal Sensitive Handwheel 1-5/16" Acme Connection Nipple with Excess Flow V alve Regulator Y OUR NEW GAS GRILL IS EQ UIPPED WITH A TYPE 1 CONNECTION DEVICE WHICH HAS 3 SAFETY FEA TURES (FIG. 54): 1. Proof of gas seal between the connector and the cylinder bef ore gas flow takes place.
Please do not send other correspondence to the address belo w. PRODUCT REGISTRA TION DEP AR TMENT PO BO X 2931 WICHIT A ,KS 67201 A TTN: DEPT 586 IMPOR T ANT! Coleman ¨ Grill W arranty Registration C.
7) Side burner (if applies) 8) Steamer/Fryer/W ar mer (if applies) 9) Side table design 10) Color of the grill (not including stainless steel) 11) Warming racks 12) Dependable igniter 13) Size of the .
Notes 29.
Notes 30.
Notes 31.
The Coleman Company , Inc. • 3600 N. Hydraulic • Wichita, KS 67219 U .S.A. 1-800-356-3612 • TDD: 316-832-8707 9992-031 (2/23/06) © 2006 The Coleman Company , Inc. All r ights reserved. Coleman ® and are registered trademarks of The Coleman Compan y , Inc.
An important point after buying a device Coleman 9992-645 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Coleman 9992-645 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Coleman 9992-645 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Coleman 9992-645 you will learn all the available features of the product, as well as information on its operation. The information that you get Coleman 9992-645 will certainly help you make a decision on the purchase.
If you already are a holder of Coleman 9992-645, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Coleman 9992-645.
However, one of the most important roles played by the user manual is to help in solving problems with Coleman 9992-645. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Coleman 9992-645 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
