Instruction/ maintenance manual of the product 9805-130 Coleman
Go to page of 2
Connect F ram e to T ent – Insert one Pole Tip into grommet on stake loop located at middle edges of the tent.(illus. 3). – Go to opposite end of pole and gradually apply pressure to the pole forming an arch until you are able to insert the pole tip into the grommet.
Pr o-Tips • Under certain conditions (cold weather , high humidity , etc.) condensation will form on the inside surfaces of your tent. Condensation is caused by wa ter vapor from your breath, perspira tion, or any wet clothing inside your tent. It is NOT LEAKAGE through the tent fabric.
An important point after buying a device Coleman 9805-130 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Coleman 9805-130 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Coleman 9805-130 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Coleman 9805-130 you will learn all the available features of the product, as well as information on its operation. The information that you get Coleman 9805-130 will certainly help you make a decision on the purchase.
If you already are a holder of Coleman 9805-130, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Coleman 9805-130.
However, one of the most important roles played by the user manual is to help in solving problems with Coleman 9805-130. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Coleman 9805-130 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
