Instruction/ maintenance manual of the product CFD-2F ColdTech
Go to page of 12
COMMERCIAL REFRIGERA T OR AND FREEZER OWNER'S MANUAL Models: CFD-1R, CFD-1F , CFD-2R, CFD-2F , CFD-3R, CFD-3F This manual contains important information regarding your new ColdT ech unit. Please read the manual thoroughly prior to equipment set-up, operation and maintenance.
T ABLE OF CONTENTS Page 2...............................................................ColdT ech Limited W arranty Page 3.........................................................................................Installation Page 5.....................
INST ALLA TION IMPORT ANT!!! PLEASE READ BEFORE INST ALLA TION 1) If the unit has recently been transported please let unit stand still for a minimum of 24 hours before plugging it in. 2) Make sure that the unit drops down to desired temperature before loading the unit with product.
SHELF BRACKET INST ALLA TION Make sure to follow diagrams to properly install shelf brackets!!! (picture of interior pilasters, right side) (picture of interior pilasters, left side) 1) Attach.
SAFETY / W ARNING Please pay close attention the the safety notices in this section. Disregarding these notices may lead to serious injury and/or damage to the unit. KEY 1) T o minimize shock and fire hazards, be sure not to overload outlet. Please designate one outlet for your unit.
REGULAR MAINTENANCE CLEANING THE CONDENSER COIL For efficient operation, it is important that the condenser surface be kept free of dust, dirt, and lint. ColdT ech recommends cleaning the condenser coil and fins at least once per month. Clean with a commercial condenser coil cleaner , available from any kitchen equipment retailer .
SEE P A GE 9 -7-.
-8-.
ColdT ech® Refrigerator Settings T emperature set to 37 F Parameter Function Set Range Default E1 Lower Setpoint Limit -40 F ~ set temp 36 F E2 Higher Setpoint Limit set temp ~ 120 F 45 F E3 Hysteresis, temp.
ColdT ech® Freezer Settings T emperature set to -4 F Parameter Function Set Range Default E1 Lower Setpoint Limit -40 F ~ set temp -10 F E2 Higher Setpoint Limit set temp ~ 120 F 20 F E3 Hysteresis, temp variance 1 ~ 18 F 10 F E4 Comp.
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION Compressor not running. Fuse blown or circuit breaker tripped. Replace fuse or reset circuit b r e a k e r . Power cord unplugged. Plug in power cord.
T he New S ymbol of Innov ation™ MEMO RET AIN THIS MANUAL FOR FUTURE REFERENCE Please read the entire manual carefully before installation and operation. If certain recommended procedures are not followed, warranty claims will be denied. Notice: ColdT ech reserves the right to make changes in design and specifications without prior notice.
An important point after buying a device ColdTech CFD-2F (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ColdTech CFD-2F yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ColdTech CFD-2F - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ColdTech CFD-2F you will learn all the available features of the product, as well as information on its operation. The information that you get ColdTech CFD-2F will certainly help you make a decision on the purchase.
If you already are a holder of ColdTech CFD-2F, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ColdTech CFD-2F.
However, one of the most important roles played by the user manual is to help in solving problems with ColdTech CFD-2F. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ColdTech CFD-2F along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
