Instruction/ maintenance manual of the product CA611 Code Alarm
Go to page of 13
CA61 1 Owners Manual CAUTION! Be certain that the vehicle is outdoors before using this or any re- mote vehicle starting device. A running engine produces dangerous carbon monoxide fumes which can be harmful or fatal if prolonged exposure occurs. DO NOT remote start the vehicle if the car is garaged.
Page 2 Y our Remote S tart Alarm System has many features and available options some of which are selected at time of installation. Consult your installing dealer for options that may have been installed and are not listed. ARMING THE SYSTEM: 1. T urn the engine OFF , exit the vehicle, and close all doors, hood and trunk.
ARMING THE SYSTEM: If the passive arming feature has been selected: T urn the engine OFF , exit the vehicle, and close all doors, hood and trunk. The LED will begin to flash rapidly indicating that the 30 second passive arming timer has begun.
Page 4 DISARMING THE SYSTEM: As you approach the vehicle, press and release the Disarm button on the transmitter . The parking light s will flash 2 times, the siren/horn will chirp 2 times, and the LED will turn off. If you have the optional door lock/unlock circuit installed, the doors will unlock.
Page 5 zone. For additional information, refer to INTRUSION WARNING SIGNALS (page 5) of this manual. NOTE: If the optional 2 step door unlock circuit is installed, when the unlock transmitter button is activated, the drivers door only will unlock, pressing the unlock button a second time will cause all doors to unlock.
Page 6 V ALET MODE: The valet button allows you to temporarily bypass all alarm functions, eliminating the need to hand your transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm functions are bypassed, however the remote panic feature, remote door locks and remote start will remain operational.
Page 7 1. Disarm the system by use of the transmitter , or by use of the emergency override sequence. Turn the ignition switch to the ON position. 2. Within 10 seconds, press and release the valet/override button 3 times. 3. Within 10 seconds turn the ignition switch OFF , ON, OFF , ON, OFF , ON.
5. Within 10 seconds, begin to press and release the push button switch to set the tenths digit. (As per example press and release 5 times to set the tenths digit to 5) 6. Within 10 seconds of the last press of the button, turn the ignition OFF then ON.
new code tenths for step 2 above, and units for step 5 above. ELIMINA TING THE NORMAL ARM/DISARM CHIRPS Y ou can selectively eliminate the normal arm and disarm chirps by holding the transmitter button slightly longer when arming or disarming. This will prevent the siren/horn chirps for one arm or disarm cycle.
REMOTE ST ARTING THE VEHICLE: Press and release the option button of your transmitter 2 times within 2 seconds to activate the remote start system. The vehicle will start and remain running for the pre-programmed 10 o r 15 minutes.
ADDITIONAL REMOTE FUNCTION CHANNEL 3/TRUNK: The system has an additional feature (Channel 3) that can be connected to the T runk Release. T o operate the accessory associated with channel 3, press and hold the trunk button of your transmitter for 4 seconds.
ALARM DASH MOUNTED LED INDICA TORS RAPID FLASHING = P ASSIVE ARMING SLOW FLASHING = A RME D OFF = DISARMED ON SOLID = V ALET MODE 2 FLASH...SOLID = REMOTE ST AR T V ALET MODE 3 FLASH...P AUSE = INTRUSION ZONE 3 2 FLASH...P AUSE = INTRUSION ZONE 2 1 FLASH.
Code Systems, Inc. Limited Lifetime Warranty Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE vehicle security product (the “Product”), purchased from an authorized C.
An important point after buying a device Code Alarm CA611 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Code Alarm CA611 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Code Alarm CA611 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Code Alarm CA611 you will learn all the available features of the product, as well as information on its operation. The information that you get Code Alarm CA611 will certainly help you make a decision on the purchase.
If you already are a holder of Code Alarm CA611, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Code Alarm CA611.
However, one of the most important roles played by the user manual is to help in solving problems with Code Alarm CA611. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Code Alarm CA611 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
