Instruction/ maintenance manual of the product ROAD WARRIOR Cobra
Go to page of 8
PRINTED IN CHINA © 1997 COBRA ELECTRONICS CORPORA TION 480-207-P-001 Cobra Electr onics Corpor ation 6500 W . Cortland Street Chicago, IL 60707 OPERA TING INSTRUCTIONS FOR YOUR “ Big Power In Small Packages.
T able of Contents Introduction ............................................................................................... 2 Safety ............................................................................................................ 3 Installation .
4 When working on the installation, be sure that the inverter power switch is in the OFF position. Note that this is only a control switch which tells the inverter whether or not to run. Even though it may be OFF , the battery will still be connected directly to the inverter Õs input terminals, so they will always be live.
6 Each inverter comes with a removable connector for r emote ON-OFF control plus a har d-wired output. The remote connector has five terminals, each of which will accept a wire as heavy as A WG #12. The terminals viewed end-on are: (1) (2) (3) (4) (5).
8 Using your inverter is quite simple. Just turn the switch ON, and observe that the AC light comes on, indicating ther e is 1 15 volt AC power at the output. Any appliance connected to the inverter will operate, if it is within the inverter Õs power capability .
10 Overvoltage If the input voltage goes above 16.5 volts, the inverter will shut down to p r otect itself. When the voltage r eturns to less than 16.5 volts, the inverter will turn back on automaticall y . CAUTION: V oltages above 18 volts can cause permanent damage.
12 COBRA ELECTRONICS CORPORA TION 6500 W . Cortland Street Chicago, Illinois 60707 In addition to its exclusive series of power inverters, Cobra is also one of AmericaÕs leading brands of CB radios and accessories, Intenna cor dless telephones and answering systems, and Safety Alert ¨ radar/laser detectors.
NOTES 13 NOTES 14 Trade/Road Inverter Manual 9/15/97 10:16 AM Page 16.
An important point after buying a device Cobra ROAD WARRIOR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cobra ROAD WARRIOR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cobra ROAD WARRIOR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cobra ROAD WARRIOR you will learn all the available features of the product, as well as information on its operation. The information that you get Cobra ROAD WARRIOR will certainly help you make a decision on the purchase.
If you already are a holder of Cobra ROAD WARRIOR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cobra ROAD WARRIOR.
However, one of the most important roles played by the user manual is to help in solving problems with Cobra ROAD WARRIOR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cobra ROAD WARRIOR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
