Instruction/ maintenance manual of the product microTALK MT 800 Cobra
Go to page of 10
Product Features • T wo-W ay Radio with up to a 5 km (3 mile) range • 8 Channels * • 38 CTCSS P rivacy Codes • 83 DCS Privacy Codes • Backlit LCD Display • Battery Saver Circuitry • Maxi.
NOTE: Est imated oper ation time on full charge: 1 2 hours. These rechargeable batteries must be recycled or disposed of properly in compliance with all applicable laws. They must not be thrown in the rubbish bin. Some countries and local authorities require recycling and have established collection programs.
OPERA TION Listening for a Response R elease the T ALK button to r eceive incoming transmissions. Y our microT ALK ® is always in LISTENING MODE except when t he T ALK, CALL or MODE b uttons are pressed. T o Adjust V olume Press the VOLUME UP or the VOLUME DOWN buttons.
OPERA TION and MODE FUNCTIONS Extern al Spea ke r/Micr ophone / Charg e Jack Y our microT ALK ® radio can be fitted with an external s peaker/microphone, freeing y our hands for other tasks. T o Attach the External Speaker/Microphone or C harger: 1. Op en t he ch ar ge tab on top of th e radio .
MODE FUNCTIONS OPERA TION 3. When your desired privacy code is displayed, c hoose one of the following: a . Press the MODE button to enter the new s etting and proceed to other functions. b . Press the LOCK button to enter the new setting and return to LISTENING MODE.
MODE FUNCTIONS OPERA TION c. Press the LOCK button to return to L ISTENING MODE on either the channel or c hannel/privacy code that was displayed b efore you entered Mode Functions or the channel on which, during scanning, you last transmitted or received.
MODE FUNCTIONS OPERA TION During Scanning (While Receiving an I ncoming T ransmission), Y ou Can Choose f rom the Following: a . Press and hold the T ALK button to communicate on that channel/privacy code. Y our radio will remain on that c hannel/privacy code and return to L ISTENING MODE.
MODE FUNCTIONS OPERA TION T o T urn Dual Watch On: N OTE: Dual W atch Location 2 must be p rogrammed to turn Dual Watch on. 1 . Set the first Dual Watch Location (channel/privacy code) you wish to monitor ( see “Channels,” “CTCSS P rivacy Codes” and “DCS P rivacy Codes” sections for further details).
Not pressing any buttons for 15 seconds w ill enter the Baby Monitor Mode setting a s Off and return the radio to LISTENING M ODE. NOTE: Both radios must be tuned to the same channel and privacy code to communicate. T o T erminate Baby Monitor Mode: Choose one of the following: a .
English D.O.C., W ARRANTY & CUSTOMER SERVICE Keystroke T ones W ith Keystroke T ones turned On, your radio will s ound beeps each time you press a button or change a setting. T o T urn Keystroke T ones On or Off: When you turn On your microT ALK ® radio for the f irst time, Keystroke T ones will be On.
An important point after buying a device Cobra microTALK MT 800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cobra microTALK MT 800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cobra microTALK MT 800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cobra microTALK MT 800 you will learn all the available features of the product, as well as information on its operation. The information that you get Cobra microTALK MT 800 will certainly help you make a decision on the purchase.
If you already are a holder of Cobra microTALK MT 800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cobra microTALK MT 800.
However, one of the most important roles played by the user manual is to help in solving problems with Cobra microTALK MT 800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cobra microTALK MT 800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
