Instruction/ maintenance manual of the product ESD-9870 Cobra
Go to page of 21
Operating Instructions for Y our Cobra ® 11 Band ™ Extra Sensor y Detection ® RADAR/LASER DETECTOR MODEL ESD – 9870 Nothing comes close to a Cobra ® N.
Important Information Federal Laws Governing the Use of Radar Detectors It is not against federal law to receive radar transmissions with your Cobra radar detector . The Communications Act of 1 92 4 guarantees your right to receive radio transmissions on any frequency .
NW c windshield bracket mount slot ON-OFF/VOLUME control 12V DC POWER JACK PROGRAM/MUTE button to manually mute audio alerts (and to enter programming mode). SET /CITY button for CITY or HIGHW A Y modes for fewer false alerts (and to change user mode settings while programming).
T able of Contents Important information about... Federal Laws, Safety Alert/Strobe Alert, Safe Driving, Security of Y our V ehicle, Customer Support .......................................................................... A1 IInstallation .........
3 1 INST ALLA TION Where to Mount Y our Unit Y ou will get optimum perfor mance from your detector if you mount it at a point approximately in the center of the vehicle, as low as possible on the front windshield without obstructing the unit's view of the road either to the front or rear .
1 INST ALLA TION Dashboard Mounting 1. Place the detector on the dashboard to find a location where the unit has a clear , level view of the road. The angle can NOT be adjusted after mounting. 2. Remove the paper backing from one side of the hook-and-loop fastener .
7 3 OPERA TION• EASYSET PROGRAMMING 6 3 OPERA TION• EASYSET PROGRAMMING EasySet Programming All user mode settings on your detector can be changed by using Program mode. When changing the settings, please keep in mind: • Buttons can have multiple functions.
9 3 OPERA TION• SETTINGS 8 3 OPERA TION• EASYSET PROGRAMMING * The settings for these user modes can also be changed with the one-button method. See the description of each user mode (following) for details.
3 OPERA TION• SETTINGS 3 OPERA TION• SETTINGS 11 10 IntelliMute IntelliMute is a unique new feature of the detector that allows you to avoid alerts you don’t need to hear because you are stopped or moving slowly .
3 OPERA TION• SETTINGS 3 OPERA TION• SETTINGS 13 12 Auto Mute Mode Auto Mute will automatically reduce the audio volume of all alerts after 4 seconds for as long as the signal is detected.
T one 1 beep Visual Display appears NOTE: If you do not press the SET/CITY button within 2 minutes, compass calibration will automatically terminate 1 beep Compass not set.
17 3 OPERA TION• SETTINGS Spectre Alert The detector is undetectable by police Spectre detection devices, and will alert you when such a device is in use near your vehicle. During the alert, the unit continues to detect other signals. Y ou can choose whether or not you want your unit to show Spectre alerts.
18 3 OPERA TION• SETTINGS 19 4 DETECTION Audio Alerts In V oice Alert mode you will first hear several tones, then a voice message announcing the type of signal detected, followed by more tones.
20 4 4 DETECTION 21 PLEASE NOTE : There are different tones for each Safety Aler t VG2 * your detector provides LaserEye 360° detection of these signals VG-2 Alert Safety Alert T ype of Signal emerge.
22 4 DETECTION 5 UNDERST ANDING RADAR & LASER Radar Speed Monitoring Systems Three band frequencies have been approved by the Federal Communications Commission (FCC) for use by speed monitoring radar equipment: X band 10.525 GHz K band 24.150 GHz Ka band 33.
24 5 UNDERST ANDING RADAR & LASER 25 5 UNDERST ANDING RADAR & LASER Strobe Alert Special strobes mounted on the light bars of authorized emergency vehicles (fire trucks, police cars, ambulances) automatically change traffic signals as the vehicle approaches an intersection.
27 6 PRODUCT SERVICE 26 6 MAINTENANCE & CUSTOMER SERVICE If you are asked to send your unit to the Cobra factory , please follow these steps: 1. Send the complete unit, including power cord. (It is not necessary to include the mounting bracket.) 2.
29 8 SPECIFICA TIONS 28 7 W ARRANTY X band 10.525 ± 0.050 GHz K band 24.125 ± 0.125 GHz Safety Alert 24.070 ± 0.010 GHz T raffic Warning System 24.110 ± 0.
31 NOTES 30 NOTES.
33 10 ORDER FORM For credit card orders fill out order form and fax to: 773.622.2269 or call 773.889.3087 (Press 1 from the main menu) 8:00 am - 6:00 pm, M-F , CST . Make check or money order payable to: Cobra Electronics 6500 West Cortland Street Chicago, IL 60707 USA Attn: Accessories Dept.
Printed in Korea Part No. 480-064-P ©2003 Cobra Electronics Corporation 6500 W est Cortland Street Chicago, IL 60707 USA The Cobra ® line of quality products includes: CB radios microT ALK ® radios.
An important point after buying a device Cobra ESD-9870 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cobra ESD-9870 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cobra ESD-9870 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cobra ESD-9870 you will learn all the available features of the product, as well as information on its operation. The information that you get Cobra ESD-9870 will certainly help you make a decision on the purchase.
If you already are a holder of Cobra ESD-9870, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cobra ESD-9870.
However, one of the most important roles played by the user manual is to help in solving problems with Cobra ESD-9870. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cobra ESD-9870 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
