Instruction/ maintenance manual of the product XRS 9470 Cobra Electronics
Go to page of 15
Important Information and Customer Assistance Introduction English Important Information • Federal Laws Governing the Use of Radar Detectors It is not against federal law to receive radar transmissions with your Cobra radar/ laser detector. The Communications Act of 1924 guarantees your right to receive radio transmissions on any frequency.
This booklet describes the simple steps for mounting and setting up your detector. It also provides helpful information about how radar and laser guns are used and how you can interpret the alerts you receive.
Nothing Comes Close to a Cobra ® 1 Contents Introduction Introduction Important Information ............................................................................... A1 Customer Assistance .......................................................
Nothing Comes Close to a Cobra ® Your Detector 3 Installation Your Detector 2 English Installation • Where to Mount Your Unit You will get optimum performance from your detector if you Mount it at .
Getting Started • Getting Started Your Detector Nothing Comes Close to a Cobra ® Installation Your Detector 4 English 1. Place the detector on the dashboard to find a location where the unit has a clear, level view of the road. The angle can NOT be adjusted after mounting.
Dim Button Press and release Press and release Settings Your Detector Nothing Comes Close to a Cobra ® 7 UltraBright Data Display Brightness You can choose from three settings for Brightness of the display. You can cycle through the settings by repeatedly pushing the Dim button.
IntelliMute Button Press and release Mute Button Press and release Settings Your Detector Nothing Comes Close to a Cobra ® 9 Settings Your Detector 8 English Muting an Alert Your detector allows you to quickly turn Off an audio Alert by momentarily pressing the Mute button.
Your Detector Nothing Comes Close to a Cobra ® Settings Your Detector 10 English What to Remember While Using IntelliMute IntelliMute works with both City and Auto Mute modes. Whenever your engine revs are below the activation point, the dot next to the large character on the right side of the display will remain lit.
Voice/Tone Setting You can set your detector to sound alerts with either a Voice or a Tone . You can change settings by using the Mute button. In Voice Alert mode, you will first hear several tones, then a voice message announcing the type of signal detected, followed by more tones.
Settings and Detection Your Detector Nothing Comes Close to a Cobra ® 15 Settings Your Detector 14 English Detection The tables on the following pages show you the types of Signals your detector will detect, as well as the voice and visual alerts it provides for each of them.
Detection Nothing Comes Close to a Cobra ® 17 Detection Safety Alert Signals, Voice and Visual Displays Type of Signal Voice Visual Display Emergency Vehicles Emergency Vehicle Approaching S is Stead.
Understanding Radar and Laser Your Detector Nothing Comes Close to a Cobra ® 19 Detection Your Detector 18 English Understanding Radar and Laser • Radar Speed Monitoring Systems Three band frequencies have been approved by the Federal Communications Commission (FCC) for use by speed monitoring radar equipment: X band 10.
Specifications Nothing Comes Close to a Cobra ® 21 Understanding Radar and Laser and Maintenance 20 English Your Detector Your Detector LIDAR (Laser) The correct name for the technology that most people refer to as laser is actually LIDAR , which stands for Light Detection and Ranging.
Product Service Customer Assistance Nothing Comes Close to a Cobra ® 23 Warranty 22 English Limited 1-Year Warranty • For Products Purchased in the U.
Optional Accessories 24 English Optional Accessories • You can find quality Cobra products and accessories at your local Cobra dealer, or in the U.S.
An important point after buying a device Cobra Electronics XRS 9470 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cobra Electronics XRS 9470 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cobra Electronics XRS 9470 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cobra Electronics XRS 9470 you will learn all the available features of the product, as well as information on its operation. The information that you get Cobra Electronics XRS 9470 will certainly help you make a decision on the purchase.
If you already are a holder of Cobra Electronics XRS 9470, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cobra Electronics XRS 9470.
However, one of the most important roles played by the user manual is to help in solving problems with Cobra Electronics XRS 9470. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cobra Electronics XRS 9470 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
