Instruction/ maintenance manual of the product MT 525 Cobra Electronics
Go to page of 9
This equiment is intended for use in: • Countries of use PT • SE • CH • SI • SK • TR • LI • LU • MT • NL • NO • PL • HU • IE • IS • IT • LT • LV • EE • ES • F.
PRODUCT FEA TURES English Features • T wo-Way Radio with up to a 3 km (2 mile) range • 8 Channels * • 38 CTCSS Privacy Codes • Backlit LCD Display • Battery Saver Circuitry • Maximum Range.
Battery Installation T o Install or Replace Batteries: 1. Remove belt clip by releasing belt clip latch and sliding clip Up. 2. Pull down on the BA TTERY DOOR LOCK T AB to remove the battery compartment cover. 3. Insert four (4) AAA batteries. (Always use high-quality alkaline batteries.
Battery Low Indicator When battery power is low, the BA TTERY LOW indicator will blink, indicating that batteries should be replaced or recharged. WARNING: Only the NiMH battery pack F A-BP can be recharged.
Mode Functions Press and release the MODE/LOCK button to scroll through the Mode functions. In Mode Function, you can set Privacy Codes and turn “Roger Beep” on or off. NOTE: The MODE/LOCK button has dual functions. Press and release to enter Mode Functions.
"Roger Beep" Confirmation T one Y our listener will hear an audible tone when you release the TALK button. This alerts the other party that you have finished talking and that it is OK for them to speak.
Volume T o Adjust the Volume: 1. Press the VOLUME UP or the VOLUME DOWN buttons. A triple beep sound is used to indicate that you have reached the minimum (1) or maximum (8) volume level. Call Button T o Alert Another Person That Y ou Are Calling: 1. Press and release the CALL button.
External Speaker/Microphone Jack Y our microTALK ® radio can be fitted with an optional external speaker/microphone (not included), freeing your hands for other tasks. NOTE: See “Optional Accessories” for accessory availability and ordering instructions.
D.O.C., OPTIONAL ACCESSORIES, W ARRANTY & CUSTOMER SER VICE English Declaration of Conformity This declaration is the responsibility of the manufacturer/importer Cobra Electronics Europe Limited D.
An important point after buying a device Cobra Electronics MT 525 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cobra Electronics MT 525 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cobra Electronics MT 525 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cobra Electronics MT 525 you will learn all the available features of the product, as well as information on its operation. The information that you get Cobra Electronics MT 525 will certainly help you make a decision on the purchase.
If you already are a holder of Cobra Electronics MT 525, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cobra Electronics MT 525.
However, one of the most important roles played by the user manual is to help in solving problems with Cobra Electronics MT 525. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cobra Electronics MT 525 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
