Instruction/ maintenance manual of the product Z670 Clover Electronics
Go to page of 11
INSTRUCTION MANUAL 30X DAY/NIGHT ZOOM CAMERA MODEL Z670 Copyright © 2009 Clover Electronics U.S. A. All Rights Reserved.
▪ To prevent fire or shock hazard, do not expose th e camera to rain or moisture. ▪ To avoid electrical shock, do not open the case of this product. ▪ Operate this product with the syst em such as COM22168, LCD2088, TFT2284C, TFT2288C and LCD261616 or by using onl y the power supply included.
1. Video Output/DC power Input (6 pin Din) This is a 6pin Din connector for outputti ng video signals and fo r DC 12V input from the system such as COM22168, LCD2088, TFT2284C, TFT2288C and LCD261616. 2. Video Output (BNC) This is a BNC connector fo r outputting video signals.
▪ LANGUAGE Choose “LANG (LANGUAGE)” in the Menu shown in Fig.4-1 by pressing “TELE”/”WIDE” button and select “EN (English)” by pressing “NEAR”/”FAR” button.
▪ WHITE BALANCE (WB) Choose “WB (WHITE BALANCE)” in th e Menu shown in Fig.4-2 by pressing “TELE”/”WIDE” button and choose one among AUTO, OUT DOOR, INDOOR and LAMP by pressing “NEAR”/”FAR” button. ▪ IRIS Choose “IRIS” in the Menu shown in Fig.
▪ Click the “PAN/TILT (PELCO D)” button on th e channel you wish to install the zoom camera and then the PAN/TILT Menu will be displayed as shown in Fig.4-5. ▪ Settings in the PAN/TILT Menu (Refer to System manual section 7-4.5 on page 90 for more detail) - Click the PTZ ID button in the PAN/TILT Menu shown in Fig.
- Click the “PAN/TILT & REMOTE” bu tton in the PAN/TILT menu shown in Fig.4-5, then the vendor lists will show up. Select “PELCO” on the vendor lists by clicking the mouse and then the pr otocol “PELCO D” will display.
▪ Connect the one end of 60’ 6pin Din cable to the Din jack on the rear of the zoom camera and the other end of cable to the DI N jack that the settings for PAN/TILT menu on the DVR system has been completed. -Be sure that the two arrow s on the camera and the cable should be aimed at each other.
▪ Click the Channel button in Fig. 6-2 and sele ct the Channel number of zoom camera on the pop-up screen. ▪ Click and hold the “+” or “-“ button for Zoom In/Out until getting the best quality of objects. If the Focus is set to “AUTO” on th e zoom camera, it won’t be adjusted by the “+” or “-“button.
Image pickup device SONY Color CCD TV system NTSC Resolution 480 TV lines Minimum illum ination 0.5 Lux Video output 1.0v p-p composite @75 ohms S/N ratio More than 48db Gamma characteristics 0.45 Electronic Shutter Speed 1/60 to 1/100,000sec Zoom Up to 30X Max.
HS13HB Outdoor camera housing w/heater and blower MBK010 Mounting bracket for HS13HB ADT241200 AC 24V 1.2A AC power supply for HS13HB This warranty gives the original purchaser sp ecific legal rights and you may also have other rights, which may vary from state to state.
An important point after buying a device Clover Electronics Z670 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clover Electronics Z670 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clover Electronics Z670 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clover Electronics Z670 you will learn all the available features of the product, as well as information on its operation. The information that you get Clover Electronics Z670 will certainly help you make a decision on the purchase.
If you already are a holder of Clover Electronics Z670, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clover Electronics Z670.
However, one of the most important roles played by the user manual is to help in solving problems with Clover Electronics Z670. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clover Electronics Z670 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
