Instruction/ maintenance manual of the product LCD0935 Clover Electronics
Go to page of 11
INSTRUCTION MANUAL 9.2” TFT LCD COLOR MONITORING SYSTEM With 2 Indoor/Outdoor Color Cameras MODEL: LCD0935 Ver. 061109, 011510 Copyright © 2009 Wisecomm.
▪ To prevent fire or shock hazard, do not e xpose the m onitor to rain or moisture. ▪ To avoid electrical shock, do not open the case of this product. ▪ Operate this product using only the supplied power supply . ▪ Do not overload electrical outlets or extension cords, this can result in f ire or electric shock.
1. This light is lit in blue when the AC power supply is properly plugged to DC jack (refer to #9). 2 -Select the CH1 camera by pressing this button in the manual mode or autom atic sequential mode. -Press Down ( ▼ ) button to navigate the submenu. 3.
12. Audio input (RCA jack) Audio input port for VCR playing 13. Audio output (RCA jack) Audio output port for recording. 14. Video input (BNC) Video input port for VCR playing 15. Video output (BNC) Video output port for recording. 3.2 CAMERA 1. Lens 3.
4.1 Installation of Mounting Bracket for TFT LCD Monitor 1. Turn the tightening knob ① counter-clockwise to disassemble the swivel. 2. Place the fixed ring ② into the swivel as shown ill ustration above and turn the tightening knob ① clockwise to secure the swivel.
4. Place the square m etal ④ on the top of the mounting br acket into the metal hole ⑤ on the rear of the monitor as shown illu stration above, then secure th e monitor using the locking ring ⑥ . 5. Turn the tightening knob ① clockwise to secure the swiv el after setting the desired angle of monitor to display.
1. Attach the moun ting bracket base ① to the wall or ceiling, wherever you want to install the camera. Locate a wall stud or ceiling joist and secure the bracket base using the supplied screws. 2. Lock the mounting bracket with the locking ring ② .
- All the menus will autom atically disapp ear if you don’t change values within 10 seconds. - The remote controller may not control al l the functions on the system . In case of this, please use the butto ns on the front panel. 6.1 Video Enhancement ( ) - Press the MENU button on the fr ont panel to setup the menus.
- Choose one among 15, 30, 45 and 60 to turn the power off automatically after the selected time in minute. Sharp: - Adjust the sharpness of images. Panel-LR: - You can view the mirror images or norm al images by selecting. Panel-UD: - You can view the reverse images or norm al images by selecting.
Minimum illumination 0 Lux (LED on), 0.1 Lux @F1.2 (LED off) IR LED 30pcs, Wave Length: 850nm S/N ratio More than 48db (AGC off) Gamma characteristics 0.45 Video output 1.0Vp-p Composite @75 ohms Microphone Waterproof C-Mic Exposure Time Range 1/60s ~ 20µs Lens 3.
▪ Please pack the system carefully and securely using the original pa cking m aterials, and send it prepaid and insured to: 13073 E. 166th St, Cerritos, CA 90703 . ▪ Please include a check for $20.00 to cover the cost of return posta ge and handling.
An important point after buying a device Clover Electronics LCD0935 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clover Electronics LCD0935 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clover Electronics LCD0935 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clover Electronics LCD0935 you will learn all the available features of the product, as well as information on its operation. The information that you get Clover Electronics LCD0935 will certainly help you make a decision on the purchase.
If you already are a holder of Clover Electronics LCD0935, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clover Electronics LCD0935.
However, one of the most important roles played by the user manual is to help in solving problems with Clover Electronics LCD0935. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clover Electronics LCD0935 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
