Instruction/ maintenance manual of the product C12E Clover Electronics
Go to page of 10
1" ".
2" " T ABL E OF CO NTE NTS 1. SPECIFICA TION & P ARTS IDENTIFICA TION .............................................................. ............... 2 2. OPERA TION & FUNCTION OF P ARTS ...............................................
3" " 4) When usin g an instrumen t or replacing a part for repairing, che ck it is applied to rated voltage current and capacity . 5) Pre vent wa ter fro m flowin g in to electric element s in m echanic al par ts. 6) Whe n carr ying o r tilting the app liance, remove all the objec ts on it.
4" " 2. OPERA TION & FUNCTION OF P ARTS.
5" " A. Coolin g Ope ration The vapor refrigerants that compressed to high temperature & high pressure conditions in the compressor , turn into liquid refrigerant of high temperature and.
6" " 4. INST ALLA TION PROCEDURES A. Connect the 1/4”OD tubing between water inlet of chiller and the supply water hose with pressure rating suitable for use with the application. The tubing must be acceptable for use with potable water . B.
7" " TROUBLE POSSIBLE CAUSE REMEDY REF RIGE RA TION SY STE M No electric power to outlet. Tu rn on electric power outlet. The thermostat is misadjusted or defective. Adjust or replace the thermostat, as necessary . The wires leading to the thermostat are defective or are not connected.
8" " thermostat may be defective. Replace the thermostat. The thermostat is improperly set for the prevailing environmental conditions and cooler usage. Adjust the thermostat. short running cycle. It is cooling, but does not run long enough to cool water to the required level.
9" ".
10 " ".
An important point after buying a device Clover Electronics C12E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clover Electronics C12E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clover Electronics C12E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clover Electronics C12E you will learn all the available features of the product, as well as information on its operation. The information that you get Clover Electronics C12E will certainly help you make a decision on the purchase.
If you already are a holder of Clover Electronics C12E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clover Electronics C12E.
However, one of the most important roles played by the user manual is to help in solving problems with Clover Electronics C12E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clover Electronics C12E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
