Instruction/ maintenance manual of the product XL1000 Clifford
Go to page of 8
Owner’ s Manua l World-Clas s Aut o Securit y T M.
Using Your X L 1000 Security System 2-Button/3-Channel Remote Control The 2-button/3-channel remote control is a miniature radio transmitter with a range of up to 100 feet. Obstructions, interference or a weak battery will reduce the range. Your 2-button/3-channel remote control is the key to your security system.
AutoLock/AutoUnlock For your safety and that of your passengers, the system automatically locks the doors when you turn on the ignition switch to start the engine and unlocks them once the ignition is turned off. If you prefer, you may turn off the AutoLock/AutoUnlock feature.
Tampering Wa r ning Normally, the system immediately sounds its siren at the first inkling of an intru- sion attempt. However, you may set the system to issue a rapid five-chirp warning whenever the system detects tampering to the exterior of your vehicle.
Automatic Malfunction Bypass To provide the utmost protection even if a system component malfunctions, the system will automatically bypass the faulty point and arm all other triggers and sensors until you can have the system serviced by your local Authorized Dealer.
AntiScan Car thieves use electronic scanners that rapidly transmit one remote control code after another to defeat ordinary alarms. AntiScan prevents scanners from disarming your system.
User-Selectable Features Your XL1000 vehicle security system allows you to set many of its features to your own personal preferences. We have made the programming procedures very simple: to make a change, you just flick the valet switch a few times.
Feature Factory setting # of flicks & chirps Secondary action Program completion confirmation Result Add a New Remote to Channel 1 (arm/disarm) — 13 Press remote control button I 1 chirp Button .
An important point after buying a device Clifford XL1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clifford XL1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clifford XL1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clifford XL1000 you will learn all the available features of the product, as well as information on its operation. The information that you get Clifford XL1000 will certainly help you make a decision on the purchase.
If you already are a holder of Clifford XL1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clifford XL1000.
However, one of the most important roles played by the user manual is to help in solving problems with Clifford XL1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clifford XL1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
