Instruction/ maintenance manual of the product Sabre II Clifford
Go to page of 16
Owner' s Manua l World-Clas s Aut o Securit y T M Sab r e I I.
Table of Contents Standard Features of the Sabre II . . . . . . . . . . . . . . . . . . . . . . . 2 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Your 3-button/3-channel remote controls . . . . . . . . . . . . . . .
Standard Features of the Sabre II ✔ Lifetime Warranty —For as long as you own the car, Clifford will repair or replace the control unit and remote controls free of charge (see warranty card for full details).
Standard Features of the Sabre II (cont.) ✔ Remote Door Lock/Unlock Capability — No more fumbling with keys in the dark or bad weather! A press of a button on the remote control simultaneously arms your system and locks your vehicle ’s power locks.
Standard Features of the Sabre II (cont.) ✔ Patented Remote Control Code Learning — A few flicks of a switch lets you match to the system up to 4 different 3-channel and/or ACG 12-channel remote controls. Just as easil y, a lost or stolen remote control can be deleted from the system memor y .
Welcome to the world of high-technology vehicle security and convenience C ongratulations on the purchase of your Sabre II. Clifford Electronics has long been recognized as the world’s leading manufacturer of high-technology vehicle security systems.
TO ACTIVATE THE PANIC FEATURE . . . . . . . . . . Press button 1 for 3 seconds. The parking lights will flash repeatedly and the siren will blare for 30 seconds or until you press button 1 again to turn it off. If the ignition is on (indicating you are in the car), the doors will automatically lock to prevent an assailant from entering.
Selectable starter/ignition interrupt At the time of installation, you can select whether your Sabre II interrupts the starter line or the ignition line. To verify which line is electronically interrupted, enter the vehicle, close the doors, arm the system while inside the vehicle, then try to start the engine.
UltraSecure™ Coded Valet Mode Your secret valet code In seconds, thieves can disable all other alarm brands by hotwiring the ignition and flicking an easy to find “hidden” valet switch. Your Sabre II system has safeguards that absolutely ensure a thief cannot enable the valet mode as a way of “turning off” your system.
To enable valet mode 1. Turn the ignition switch to its “ON” position or start the engine. 2. Enter your secret valet code on the PlainView switch (the LED will turn on), then return the switch to its center position. 3. You now have 10 seconds to press the latched position to enter valet mode.
Optional remote controlled valet mode entry and exit You can even remotely enable or exit valet mode if you have an optional Clifford 4-button/12-channel ACG remote control. All you need to do is transmit channel 9 (two presses of the side LevelShift button, then button 1).
Automatic malfunction bypass To provide protection even if a component malfunctions, the system automatically bypasses any faulty point and arms all other triggers and sensors to provide the utmost possible protection until you can have the system serviced by your local Authorized Clifford Dealer.
FACT™— F alse A larm C ontrol and T est With FACT, you’ll never experience repeated false alarms. If the Insignia Siren goes off, DO NOT remotely disarm the system; allow it to run for the full siren duration.
User-selectable features Your Sabre II vehicle security system allows you to set many of its features to your own personal preferences. We have made the programming procedures very simple: to make a change, you just press the PlainView switch a few times.
Feature Factory setting # of momentary presses Secondary action Program completion confirmation Result Add a new remote to channel 3 (silent arm/disarm) — 13 Press remote control button 3 3 chirps B.
How to erase the codes of lost or stolen remote controls If one of your remote controls is ever lost or stolen, you can erase its digital codes from the system memory to make sure that the missing remote control can never be used to disarm your system.
An important point after buying a device Clifford Sabre II (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clifford Sabre II yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clifford Sabre II - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clifford Sabre II you will learn all the available features of the product, as well as information on its operation. The information that you get Clifford Sabre II will certainly help you make a decision on the purchase.
If you already are a holder of Clifford Sabre II, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clifford Sabre II.
However, one of the most important roles played by the user manual is to help in solving problems with Clifford Sabre II. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clifford Sabre II along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
