Instruction/ maintenance manual of the product Cyber 1 Clifford
Go to page of 8
World-Clas s Aut o Securit y T M D:corelDRAWCOVERSCov-cybs.cd r Thursday, March 19, 1998 8:36:32 A M Color profile: _DEFAULT.CCM - AGFA-AccuSet Serie s Composit e.
Standard Features of the Cyber 1 ✔ Lifetime Warranty — For as long as you own the vehicle, Clifford will repair or replace the control unit and remote controls free of charge (see warranty card for full details).
Standard Features of the Cyber 1 (cont.) ✔ High-Output Siren — Loud siren wail for 30 seconds when the alarm detects an intrusion attempt. The system then automatically resets and rearms.
Your 2-button/3-channel remote controls The 2-button/3-channel remote controls are miniature radio transmitters powered by a 12-volt batteries. Range is up to 100 feet (a weak remote control battery will reduce range). The remote control is the key to your system.
Valet mode Whenever the system is put in valet mode, all of the system’s security features are switched off. At various times, you will need to turn the system off.
Automatic malfunction bypass The system automatically bypasses any faulty point and arms all other triggers and sensors to provide the utmost protection until you can have the system serviced. Prior intrusion attempt alert If you hear three chirps when you remotely disarm, the alarm sounded in your absence.
User-selectable features Your Cyber 1 vehicle security system allows you to set many of its features to your own personal preferences. We have made the programming procedures very simple: to make a change, you just flick the valet switch a few times.
Adding new remote controls For other drivers in your family, or if you wish to control Clifford systems on your other cars with the same remote control, you can buy additional remote controls from any Clifford Dealer (or call our Customer Service Department at 800-824-3208) and program them into the system yourself.
An important point after buying a device Clifford Cyber 1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clifford Cyber 1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clifford Cyber 1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clifford Cyber 1 you will learn all the available features of the product, as well as information on its operation. The information that you get Clifford Cyber 1 will certainly help you make a decision on the purchase.
If you already are a holder of Clifford Cyber 1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clifford Cyber 1.
However, one of the most important roles played by the user manual is to help in solving problems with Clifford Cyber 1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clifford Cyber 1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
