Instruction/ maintenance manual of the product ACE 2000 Clifford
Go to page of 9
Complete Owner’ s Manual The Science of Security ™ USA Headquarters Canada Headquarters UK Headquarters Germany Headquarters Mexico Headquarters 20750 Lassen Street Chatsworth, California 91311 1-.
Standard Features Maintenance Your Clifford system requires no maintenance except for periodic replacement of the remote control batteries. This product, like any electrical device in your vehicle, requires your car battery be in proper working order and fully charged.
Welcome to the world of high-technology vehicle security and convenience C ongratulations on the purchase of your Clifford Electronics mobile security/convenience system. Clifford Electronics has long been recognized as the leading manufacturer of high-technology vehicle security systems.
Adding new remote controls For other drivers, or to control Clifford G4 systems on your other cars with the same remote, you can buy additional remote controls from any Clifford Dealer (or direct from the Customer Service Department of your nearest Clifford Headquarters listed on the front cover) and program them into the system yourself.
User-Selectable AutoLock and AutoUnLock™ Some vehicles are incompatible with the AutoLock and A utoUnLock features. For your safety and that of your passengers, the doors automatically lock the instant you turn on the ignition. When you turn the ignition off, AutoUnLock automatically unlocks the doors.
Smart trunk release option If you have this option, you may use the button to remotely release the trunk latch. The system’s electronic interlock prevents unintentional activat ion of the remote trunk release when you drive, or when the system is armed.
Smart prior intrusion attempt alert If you hear three chirps when you disarm, it means that a trigger or sensor was activated in your absence. When you turn on the ignition, the LED will flash 1-8 times, pause, then repeat th e flash cycle 4 more times.
a. To select another feature in that same column, repeat step 5 within the next 5 seconds (after 5 seconds, 3 chirps mean you are back to the “Feature Select” position). b. To select a different feature column, go to step 4. c. To exit program mode, turn the ignition off (you’ll hear 3 chirps and the LED will turn off).
Reset All Features If you wish to reset all the user-selectable features to their normal factory presets, you can do so simply by choosing the Reset all features selection (column 1, row 7) on the Table of User-Selectable Features .
An important point after buying a device Clifford ACE 2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clifford ACE 2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clifford ACE 2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clifford ACE 2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Clifford ACE 2000 will certainly help you make a decision on the purchase.
If you already are a holder of Clifford ACE 2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clifford ACE 2000.
However, one of the most important roles played by the user manual is to help in solving problems with Clifford ACE 2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clifford ACE 2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
