Instruction/ maintenance manual of the product 6000 Clifford
Go to page of 13
Standard Features of the IntelliGuard 600 0 Programmable (+) or (-) require relays . System Component s The IntelliGuard 6000 installation kit contains the following components : One Prewired 22-pin c.
Wiring Description for the 4-Pin Connector Pi n Wire Colo r Con nects t o 1 Green/Blu e Ignition Outpu t 2 White/Blu e Starter Outpu t 3 White/Brow n Ignition Inpu t 4 White/Green Starter Inpu t Wirin.
Passenger Compartment Connection s Control Unit and Extended Range Receive r The IntelliGuard 6000 con trol unit must be in stalled in side the ve hi cle. Un der no cir cum st a nces should the uni t be in stalled un der the hood or other simi larly hos tile en vi ron ment .
Passenger Compartment Connections (Continued ) Trunk Trigge r V ehicles with a ground-switching trunk light will interface directly with the IntelliGuard 6000 (o n positive switching Rolls - Royce vehicles , use a relay to invert polarity). The switch may be located in or near the trunk latch or at the tr u nk light.
Engine Bay Connections (Continued ) Hood Trigge r V ehicles with a ground-switching hood light will interface directly with the IntelliGuard 6000 (on positive switching vehicles, use a relay t o invert polarity). The switch may be located in or near the hood latch or at the hood light.
FACT—False Alarm Control and Tes t The system microprocessor automatically checks for another activated sensor or trigger before soun d ing the siren a second time, thus preventing any further false alarms. If you wish to test FAC T , simpl y , 1 . Arm the sys tem with the re mote con trol .
Certificate of Installatio n After installation and testing has been completed, you mus t fill in the Clifford Electronics Certificate of Installatio n . Programmable Feature s IntelliGuard 6000 comes from the factory with its features preprogrammed as noted in bol d text in the tables on pages 8 and 9.
User-Programmable Feature s User-Programmable Features (1 Chirp = OF F , 2 Chirps = ON ) Fea tur e Selec t Unmarked 1 Unmarked 2 Unmarked 3 Unmarked 4 ✱ 1 Add New Remote NOTE 1 Chirps (Off / O n /Qu.
Installer-Programmable Feature s T o access the installer-programmable features, use the procedure defined in the User-Programmable s ection, but after completing step 4, continue to press and hold the ✱ side of the Plain V iew 2 Switch for another 10 seconds.
System Checklist & Troubleshooting (Continued) n Arm the IntelliGuard 6000 (either from inside or outside the vehicle) and wait 10 seconds. T urn th e ignition to the “ON ” position. o Engine does not respond and alarm triggers. This is the correct response, proceed to step 3.
System Checklist & Troubleshooting (Continued) Step 4. Test the park ing lights. Arm the sys tem . n T wo flashes . This is the correct response, proceed to step 5 .
System Checklist & Troubleshooting (Continued ) Step 8. Test the dis arm func tion . n Disarm the system. The following should occur : o Siren chirps onc e . If the siren does not chirp once, refer to step 3 . o Parking lights flash once. If the parking lights do not flash once, refer to step 4.
System Checklist & Troubleshooting (Continued ) Step 13 . Test the AutoArming By pass fea ture . Disarm the system. T urn the ignition to the “ON” position, then turn the ignition “OF F . ” n One Chirp . This is the correct response, wait 30 seconds after the interior lights have turned off to insur e the system does not passively arm.
An important point after buying a device Clifford 6000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clifford 6000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clifford 6000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clifford 6000 you will learn all the available features of the product, as well as information on its operation. The information that you get Clifford 6000 will certainly help you make a decision on the purchase.
If you already are a holder of Clifford 6000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clifford 6000.
However, one of the most important roles played by the user manual is to help in solving problems with Clifford 6000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clifford 6000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
