Instruction/ maintenance manual of the product SGL-30-TR Cleveland Range
Go to page of 22
SE95033 Rev . 5 1333 East 179th S t., Cleveland, Ohio, U.S.A. 441 10 Phone: (216) 481-4900 Fax: (216) 481-3782 Visit our web site at www .clevelandrange.
FOR THE USER IMPOR T ANT Post in a prominent location, instructions to be followed in the event the user smells gas. This information shall be obtained by consulting your local gas supplier . Keep appliance area free and clear from combustibles. Do not obstruct the flow of combustion and ventilation air .
✘ 1 2 ✘ SER VICING IMPOR T ANT CAUTION DANGER GAS APPLIANCES For your safety K eep hands and utensils aw ay from moving parts and pinch points. W ear protective equipment when discharging hot product. Shut off power at main fuse disconnect prior to ser vicing.
GENERAL Installation of the unit must be accomplished by qualified installation personnel working to all applicable local and national codes. Improper installation of unit could cause injury or damage. This equipment is built to comply with applicable standards for manufactur ers.
INST ALLA TION KEEP THE APPLIANCE AREA FREE AND CLEAR OF COMBUSTIBLE MA TERIALS. 1. Carefully r emove unit from carton or crate. Remove any packing material from unit.
CONTROL P ANEL OPERA TING INSTRUCTIONS ITEM # DESCRIPTION FUNCTION 1. On-Off Switch Main power switch for unit. 2. Power Indicator Light (Red) Indicates power is on. 3. Heat Indicator Light (Y ellow) T urns ON when system is calling for heat and OFF when system is satisfied.
ST ART UP PROCEDURE This appliance has been factory tested and adjusted under ideal conditions but, rough handling, low gas pressur e, altitude or variations in gas characteristics may requir e fine adjustment. All units are equipped with fixed orifices and do not requir e primar y air adjustment.
CARE AND CLEANING Cooking equipment must be cleaned regularly to maintain its fast, efficient cooking performance and to ensure its continued safe, r eliable operation. The best time to clean is shortly after each use (allow unit to cool to a safe temperature).
ST AINLESS STEEL EQUIPMENT CARE AND CLEANING (Suppied courtesy of Nafem. For more information visit their web site at www .nafem.org) Contrary to popular belief, stainless steels ARE susceptible to rusting. Corrosion on metals is everywhere. It is r ecognized quickly on iron and steel as unsightly yellow/orange rust.
2 6 6 3 10 7 4 12 11 9 10 2 8 5 1 1 6 6 3 7 4 Hydraulic Jack Assemb ly KE000772 F or units built prior to Februar y 2005 (replaces old Jac k #s SK2381000 & SK00403) Hydraulic Jack Assemb ly KE000523 F or units built after F ebr uar y 2005 HYDRAULIC JACK ASSEMBLIES ITEM NO .
HYDRAULIC JACK ASSEMBLIES - HAND TIL T ITEM NO . P ART NO . DESCRIPTION QTY . 1 2381000 HYDRAULIC JACK ASSEMBL Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 (NO LONGER A V AILABLE, USE KE000772) 5 F A95007-7 RET AINING RING .
ACTUA TOR ASSEMBL Y - POWER TIL T (used prior to January , 2000) ITEM NO . P ART NO . DESCRIPTION QTY . 1. SK2346100 ACTUA TOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 2. SK2337499 ACTUA TOR MOUNTING BRACKET ASSY .
ACTUA TOR ASSEMBL Y - POWER TIL T (used after Jan uar y , 2000) 7 7 6 7 9 8 9 7 3 4 4 1 2 5 5 10 11 1 3 12 15 14 ITEM NO . P ART NO . DESCRIPTION QTY . 1. SK2346100 ACTUA TOR ASSY ., COMPLETE WITH ITEM 2 . . . . . . . . . . . . . . . . . . . . . . . .
New (added February 2005) KE600452 (Strainer) FI00351 (Bushing) FI05318-1 (Elbow , hose barb) ITEM NO . P ART NO . DESCRIPTION QTY . 1 2379100 HYDRAULIC ADAPTOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 2379600 HYDRAULIC HOSE ASSY .
ITEM NO . P ART NO . DESCRIPTION QTY . 1 2474101 POWER SWITCH (240V , USED AFTER FEBRUARY 2001) . . . . . . . . . . . . . . . . . . . . . .1 2474100 POWER SWITCH (USED AFTER FEBRUARY 2001) . . . . . . . . . . . . . . . . . . . . . . . . . . .1 2343500 POWER SWITCH (USED PRIOR TO FEBRUAR Y 2001) .
ITEM NO . P ART NO . DESCRIPTION QTY . 1. SE00119 T HERM OSTA T BOAR D ASSEMBLY (INCLUDES 2 - 14) 1 2. SK2142002 TEMPERA TURE SENSOR BOARD 1 3. SK2159300 INSULA TOR, THERMOST A T 1 4. SK2498399 P OTEN TIO ME T ER SHAFT ASSEMBLY (INCLUDES 5-10) 1 5. SK2167200 RET AINING RING, SP-NR #R1000-25 1 6.
ITEM NO . P ART NO . DESCRIPTION QTY . 1 KE53838-32 TRANSFORMER - POWER TIL T - 110-120V/60 . . . . . . . . . . . . . . . . . . . . . . . . .1 KE53838-31 TRANSFORMER - POWER TIL T - 208-240/60 . . . . . . . . . . . . . . . . . . . . . . . . . .1 KE53838-30 TRANSFORMER - POWER TIL T - 208-240/50 .
ITEM NO. P ART NO. DESCRIPTION QTY . 1 KE55069-7 HI-LIMIT 1 2 2353900 BULB CLAMP 1 3 2354099 BULB SHIELD ASSY 1 4 F95 NUT 1 5 2345100 RTD SENSOR 1 6 2344900 SHIELD LINER 1 7 2345000 SHIELD 1 PLA TE ASSEMBL Y (used prior to January , 2000) ITEM NO. P ART NO.
SPRING ASSEMBL Y ITEM NO . P ART NO . DESCRIPTION QTY . 1 2452300 SPRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 2381700 TURNBUCKLE BODY . . . . . . . . . . . . . . . .
ITEM NO . P ART NO . DESCRIPTION QTY . 1 2359300 BACK TOP MOUNTING BRACKET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 2360101 REAR COMBUSTION SEAL - 40 GAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 2360100 REAR COMBUSTION SEAL - 30 GAL.
ITEM NO . P ART NO . DESCRIPTION QTY . 1 2373100 BURNER (NA T . GAS) . . . . . . . . . . . . . . . . . . . . . . . . . . .7 for 30 gal., 10 for 40 gal. KE02410 BURNER (LP GAS) . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 for 30 gal., 10 for 40 gal.
N OT E : ANY MAINTENANCE OR SERVICE INVOL VING DISSASSEMBL Y OF COMPONENTS SHOULD BE MADE BY A QUALIFIED SERVICE TECHNICIAN. ENSURE GAS, ELECTRICAL AND W A TER SUPPL Y (IF APPLICABLE) TO THE APPLIANCE ARE SHUT OFF Y ou have purchased the finest commer cial cooking equipment available anywhere.
An important point after buying a device Cleveland Range SGL-30-TR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cleveland Range SGL-30-TR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cleveland Range SGL-30-TR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cleveland Range SGL-30-TR you will learn all the available features of the product, as well as information on its operation. The information that you get Cleveland Range SGL-30-TR will certainly help you make a decision on the purchase.
If you already are a holder of Cleveland Range SGL-30-TR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cleveland Range SGL-30-TR.
However, one of the most important roles played by the user manual is to help in solving problems with Cleveland Range SGL-30-TR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cleveland Range SGL-30-TR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
