Instruction/ maintenance manual of the product CT-2300 Classe Audio
Go to page of 34
O w ner ’ s M a nu al CA-2300 / CT- 230 0 Two-Channel Amplifier.
2 Classé marks the “CE” symbol indicating compliance of this device with the EMC (Electromagnetic Compatibility) and L VD (Low V oltage Directiv e) standards of the E uropean Community . Classé complies with the European P arliament and Council Dir ective 2002/96/EC concerning W aste Electrical and Electronic Equipment (WEEE).
3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. F ollow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Donotblockanyventilationopenings.
4 Contents W elcome to the Classé family .......................................................................... 5 a word about installation ....................................................................................... 5 Unpacking and Placement .
5 Welcome to the Classé family Congratulations on your purchase of a Classé amplier . It is the r esult of many years of continuous renement, and we ar e sure that you will enjoy it for many years to come. W e value our relationship with our customers.
6 Unpacking and Placement unpacking your amplifier Carefully unpack your po wer amplier according to the supplied instructions, and remo ve all accessories from the carton. Please take care when lifting the amplier , as it is quite heavy . Important! Keep all packing materials for future transport of your Classé amplifier.
7 operating voltage e amplier is set at the factory (internally) for 100V , 120V , 220V , 230V , or 240V AC mains operation, as appropriate for the country in which it is to be sold (230V only in E uropean U nion countries, in compliance with CE regulations) .
8 warm up/break-in period Y our new Classé power amplier will deliver outstanding performance immediately . Howev er , you should expect to hear it improve somewhat as it reaches its normal operating temperatures and its v arious components “break-in.
9 Special Design Features highly refined circuit design is Classé amplier benets from the use of high quality component parts, application of advanced electronics design principles and exhaustive testing. I ts design uses fewer parts in the signal path than is typical, while also achieving outstanding measured performance.
10 robust protection F inally , your new Classé amplier incorporates a variety of protection circuits, all designed to protect both the amplier and your loudspeakers against dangerous fault conditions.
11 Front Panel 1 Standby button & LED indicator e front panel S tandby button will toggle the amplier between operate, its fully operational state, and a standby mode that leaves the amplier o, yet ready to r espond to system commands via any of the supported control options(e.
12 When in standby ,theamplier ’ sgainstagesarepowereddo wn.Onlya small power supply and contr ol circuit remain on, consuming r elatively little power . Fortunately , since the output stages by their nature conduct a great deal of current, they warm up and sound their best v ery quickly .
13 INPUT OUTPUT INPUT RIGHT CAUTION! T O REDUCE THE RISK OF ELECTRIC SHOCK, GROUNDING OF THE CENTER PIN OF THIS PLUG MUST BE MAINTAINED AVIS! POUR RÉDUIRE LE RISQUE DE CHOC ÉLECTRIQUE LA FICHE CENTR.
14 T echnically ,balancedaudiointerconnectionsprovidetwodistinctbenets: theydoublethesignal’ sstrengthasittravelsfromonecomponenttothe.
15 (Many high quality loudspeakers also oer two sets of connections on their speakers. G ener ally , one set of the connections on the loudspeaker feeds the portion of the speaker’ s crossover ne.
16 6 DC Trigger Input and Output Many audio/video preampliers can supply a DC contr ol voltage to associated equipment in order to induce desir ed behavior . Y our Classé amplier can take advantage of these capabilities in order to be switched between oper ate and standby automatically , perhaps in concert with the A/V preamp itself .
17 Do not open y our amplier . ere are no user-serviceable parts within this product. Danger! Potentially dangerous voltages and current capabilities exist within your power amplifier, even when disconnected from AC mains. Do not attempt to open any portion of the amplifier’s cabinet.
18 Installation Y our new Classé amplier is quite simple to set up and enjoy . Please follow the steps outlined below in or der to safely set up and use your new amplier . Important: The AC mains connection should be the last connection you make on your new power amplifier.
19 Optional accessory feet can be purchased and installed as follows. 1b. I nstall (4) accessor y feet (FC90902) and secure with (8)6-32X3/4screws. Tigh te n to 8.5 in -l bs (0.96 N- m) Important! Install (2) securing brackets when using the CT-2300 in a stand-alone (non-rack-mount) installation.
20 3. Configure your amplifier turn-on delay/amp no. In a system that contains multiple Classé ampliers, you may set the number of seconds of turn-on delay for each amplier , allowing each to turn on in the order you hav e specied, rather than all at once.
21 8. Install the front panel (CT-2300 only). Once all connections have been made and the amplier is veried to be working correctly , remo ve the front panel from its packing and rmly pr ess it into place.
22 ediagramsbelowillustrateho wtoconnecttheCAN-Bushar dware. Any combination of models in any order . OUT C AN-B U S IN OUT C AN-B U S IN OUT C AN-B U S IN OUT C AN-B U S IN F or any system with SSP-300 or SSP-600.
23 using CAN-Bus CAN-Busiscontrolledviathetouchscr eenofanyDeltaorCTseries component.ereisnomastercomponent,soDelta/CTseriessystemswher e two or more units have a touchscr een can be controlled through any of the touchscreens.
24 CAN-Bus shared features efollowingCAN-B usfeaturesaresharedbyallmodels. configuration Selecting conguration will present the CAN-B us conguration screen allowing access to name, global brightness, and global standby featur es.
25 CAN-Bus model- specific features efollowingCAN-B usfeaturesaremodelspecic. PlayLink is feature is exclusiv e to Delta series disc players and will only function if thediscplayerisconnectedtoaCAN-Busenabledpr eamporsurroundsound processor .
26 amp info A vailable for ampliers only , this screen displays the data provided by the heatsink and AC M odule temperature sensors. NO TE:isfeatureisonlyaccessiblewhenthetargetamplierison.
27 Care and Maintenance T oremovedustfromthecabinetofyouramplier ,useafeatherdusteroralint- freesoftcloth. T oremo vedirtandngerprints,werecommendisopropylalcohol and a soft cloth.
28 Troubleshooting In general, you should r efer any ser vice problems to your Classé dealer . Before contacting your dealer , however , check to see if the problem is listed here.
29 4. The AC mains fuse is blown. ere is a specic troubleshooting procedur e for a blown AC mains fuse, since this rare occurrence sometimes indicates a signicant pr oblem.
30 Specifications Alltestsun-weightedand500kHzmeasurementbandwidth(ex ceptSNR). n Frequency response 1Hz – 80kHz, -3dB n Output power 300W rms into 8 W (24.8 d BW ) 600W rms into 4 W (24.8 d BW ) Both channels driven n Harmonic Distortion <0.
31 Dimensions CA-2300 " 0 5 . 7 1 m m 4 4 4 " 0 0 . 8 m m 3 0 2 " 8 7 . 8 m m 3 2 2 " 1 2 . 0 1 m m 9 5 2 " 0 2 . 0 1 m m 9 5 2 " 2 5 . 7 1 m m 5 4 4 " 3 8 . 8 1 m m 8 7 4 " 4 9 . 5 1 m m 5 0 4 " 0 0 . 6 1 m m 6 0 4 " 6 7 .
32 CT-2300 19.00" 483mm 6.97" 177 m m 19.89" 505mm 17.00" 432mm 17.41" 442mm.
.
V 1.4 030314 Copyright©2014B&WGr oupLtd. B&W G roup Ltd. 5070 F rançois Cusson Lachine, Quebec CanadaH8T1B3 +1 (514) 636-6384 +1 (514) 636-1428 (fax) http://www .classeaudio.com N or thAmerica:(514)636-6384 email: cservice@classeaudio.
An important point after buying a device Classe Audio CT-2300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Classe Audio CT-2300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Classe Audio CT-2300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Classe Audio CT-2300 you will learn all the available features of the product, as well as information on its operation. The information that you get Classe Audio CT-2300 will certainly help you make a decision on the purchase.
If you already are a holder of Classe Audio CT-2300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Classe Audio CT-2300.
However, one of the most important roles played by the user manual is to help in solving problems with Classe Audio CT-2300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Classe Audio CT-2300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
