Instruction/ maintenance manual of the product CA-150 Classe Audio
Go to page of 14
CLASSÉ AUDIO CA - 150 POWER AMPLIFIER CA - 150 OWNER'S MANUAL.
- 2 - CLASSÉ DESIGN PHILOSOPHY 1. REPEATED LISTENING DESIGN SESSIONS: Fine tuning of sound by exchanging and mixing of parts (transistors, capacitors , wiring, PCB boards etc.
- 3 - CA - 150 OWNER'S MANUAL TABLE OF CONTENTS UNPACKING & SET - UP.................................................................... 4 GENERAL CONNECTIONS.............................................................. 5 CONNECTIONS F OR REGULAR OR BALANCED INPUTS.
- 4 - UNPACKING & SET - UP Your CLASSÉ CA - 150 power amplifier is packed in high den sity, semi - rigid foam placed in a special cardboard box. To remove the unit, open and spread all the to p flaps of the box and by its sides, lift out the entire unit and put it on a large flat surface.
- 5 - GENERAL CONNECTIONS A.C. LINE Insert the linecord into the A.C. receptacle on the rear of the unit. CAUTION: SAFETY INSTRUCTIONS DISCONNECT AC LINE CABLE WHILE MAKING ALL CONNECTIONS. "FLOATING THE GROUND", OR DEFEATING THE GROUND ON A 3 - PRONG LINECORD MAY CREATE A SHOCK HAZARD.
- 6 - MONO Please read through the previous Stereo section for general notes on securing good connections, and safety tips. If the unit has been previously used in stereo, make sure it is OFF, an d remove all connections, including the AC line cable. Make sure the STEREO/MONO switch is switched to the MONO position [DOWN].
- 7 - C ONNECTIONS FOR REGULAR OR BALANCED INPUTS: The CLASSÉ CA - 150 power amplifier is equipped with both regular and balanced inputs. Either one may be used SEPARATELY BUT NOT SIMULTANEOUSLY .
- 8 - Having confirmed the correct connections, plug the XLR connectors of the balanced interconnects into the loc king XLR connectors on the rear panel of the CA - 150 . (To remove the connectors, press the tab above the connector.) MONO OPERATION As stated before, regular or balanced inputs can be used in stereo or mono.
- 9 -.
- 10 - CLASSÉ CA - 150 LIMITED FACTORY WARRANTY (North America only). IMPORTANT : Warranty registration, and a copy of the “Authorized Dealer Bill of Sale” must be received at the Classé Audio factory (address: pages 12) within thirty (30) days of purchase by the original retail purchaser in order to validate these warranty.
- 11 - CLASSÉ AUDIO INC. SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM OR RELATING TO THE SET - UP, OPERATION, FA ILURE, TROUBLESHOOTING, OR REPAIR OF THE AMPLIFIER AND/OR ANY OTHER EQUIPMENT USED THEREWITH.
- 12 - You must fill out and return the form below, along with a copy of the authorized dealer bill of sale, to the factory within thirty (30) days of purchase. This will allow us to provide expedient service, information regarding updates and new prod ucts, and validate the Classé warranty.
- 13 - CLASSÉ CA - 150 STEREO BALANCED POWER AMPLIFIER SPECIFICATIONS SHEET CA - 150 FEATURES : 150 watts stereo, 325 watts mono, high current, sleek curved chassis with large dual heat sinks at rear, both regular and balanced inputs externally swi tchable, sculpted one piece handles.
- 14 - Net: 47 lbs. Notice to all Classé Product owners: Thank you for your purchase of a Classé Audio component. All of us at Classé have taken extreme care to ensure that your purchase will become a prized investment. We are proud to inform you that all Classé Audio co mponents have been officially approved for the European Community CE mark.
An important point after buying a device Classe Audio CA-150 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Classe Audio CA-150 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Classe Audio CA-150 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Classe Audio CA-150 you will learn all the available features of the product, as well as information on its operation. The information that you get Classe Audio CA-150 will certainly help you make a decision on the purchase.
If you already are a holder of Classe Audio CA-150, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Classe Audio CA-150.
However, one of the most important roles played by the user manual is to help in solving problems with Classe Audio CA-150. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Classe Audio CA-150 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
