Instruction/ maintenance manual of the product JV35 Clarity
Go to page of 34
E N G L I S H JV T he T alking Phone ™ Clarity , a Division of Plantronics, Inc. 4289 Bonny Oaks Drive, Chattanooga, TN 37406 T el: 800-426-3738 Fax: 800-325-8871 E-mail: claritycs@plantronics.com W ebsite: www .clarityproducts.com ©2010 Clarity , a Division of Plantronics, Inc.
Contents Impor tant Safety Instructions .................... i-ix Intr oduction ................................................... 1 Package Checklist ......................................... 2 Features Identification ..............................
L. Recording Memor y button identification announcements ................... 15 M. Recording Number button announcements ....................................... 17 N. Selecting Number button announcements ....................................... 18 O.
E N G L I S H iii Impor tant Safety Instr uctions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire and electric shock to persons, including the following: 1. Re ad an d un d er st an d all instructions.
8. Do not cover the slots and openings on this telephone. This telephone should never be placed near or over a radiator or heat register . This tele phone s hould no t be placed in a built-in installation unless proper ventilation is provided.
E N G L I S H on the telephone. 13. T o reduce the risk of electrical shock, do not take this phone apar t. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used.
damaged; F . If the telephone exhibits a distinct change in per for mance. 15. Never install telephone wiring during a lightning storm. 16. Never install telephone jacks in wet locations unless the j ac k is s pec if ic al ly designed for wet locations.
E N G L I S H Impor tant Safety Instr uctions ADDITIONAL SAFETY NOTES FOR CANADIAN USERS The following items are included as par t of the CS-03 Requirements. The standard connecting arrangement for the equipment is CA11A. This product meets the applicable Industr y Canada technical specifications.
means of a cer tified connector assembly (telephone extension cord). The customer should be aware that compliance with the above conditions may not prevent degradation of ser vice in some situations. Repairs to cer tified equipment should be made by an authorized Canadian maintenance facility designated by the supplier .
E N G L I S H ix W ARNING: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority , or electrician, as appropriate. The Ringer Equivalent Number is an indication of the maximum number of terminals allowed to be connected to a telephone inter face.
1 Introducing the JV35 Thank you for selecting the exciting new JV35 from Clarity . It has been designed to meet the highest quality standards to provide you with years of convenient and trouble-free ser vice. Please read these operating instructions thoroughly before using your telephone.
E N G L I S H 2 Package Checklist JV35 HOLD T ONE Lo Hi VOL PR OG BOOST MEMOR Y REDIAL H P A M R USER GUIDE JV35 Handset Base Unit T elephone Line Cords Handset Coil Cord User Guide Figure 1 - Package.
3 Features on the JV35 Figure 2 - Base Unit Controls Ringer volume control switch Audio output jack AC adapter Announcement switch T one/Pulse switch Emergency buttons Braille characters Raised letter.
E N G L I S H 4 Installation A. Desk Mounting 1. Plug in the long phone cord. 2. Plug the handset cord into the telephone. B. W all Mounting 1. Pull the handset hook out and reverse its position so that the hook points up. M 1 M 2 M 5 M 6 M 7 M 8 M 9 M 10 M 11 M 3 M 4 Fi g .
5 3. Plug in the shor t phone cord. 4. Inser t the AC Adapter cord into the receptacle on the back of the J V35. Then plug the AC Adapter into an electrical outlet. C. Batteries During a power outage, the JV35 will maintain full function if back-up batteries have been installed in advance.
E N G L I S H 6 Fig. 7 - Batter y installation Installation Inser t 4 AA batteries here Press in here to open batter y compar tment.
B. Making Calls Louder 1. Press the BOOST button. A light in the ring flasher shows BOOST is on. Note: There is a small bump on the BOOST button to help identify it. 7 Operating your JV35 A. Dialing Pick up the handset and dial like any other telephone.
E N G L I S H 8 Operating your JV35 Fig. 10 - Boost Override Switch ON OFF Boost Ov erride Note: In standard use, the amplifier turns off whenever you hang up the telephone.
9 Operating your JV35 E. Hold 1.T o put the phone on hold, press the HOLD button and put the handset in its cradle. The red light in the Ring Flasher shows HOLD is on. 2. T o re tu rn t o yo ur ca ll , pick up the handset. Note: When the JV35 is on hold, if you pick up another phone that is on the same line, the JV35 will automatically hang up.
E N G L I S H response. 1. Lift the handset and press the PROG button. 2. Enter the phone number as you would normally dial it. F . Last Number Redial Lift the handset and press the REDIAL button to dial the last number you dialed. HOLD T ONE Lo Hi V OL PR OG BOOST MEMOR Y REDIAL Fig.
11 Operating your JV35 3. Press PROG button again. 4. Press one of the Emergency buttons. 5. Hang up the handset. 6. The number is now stored within the Emergency button you selected. 7. T o change a stored number or to program another memor y button, Fig.
E N G L I S H 12 Operating your JV35 2. Enter the phone number as you would normally dial it. 3. Press the PROG button again. 4. Pr ess MEMO R Y , then one of the number buttons: 0, 1, 2, 3, etc. HOLD T ONE Lo Hi V OL PR OG BOOST MEMOR Y REDIAL Fig. 19 - PROG Button Fig.
Operating your JV35 HOLD T ONE Lo Hi V OL PR OG BOOST MEMOR Y REDIAL Fig. 21- Memor y Button Y ou will hear an announcement such as “Memor y One” and then the number you have stored for that button will be automatically dialed. K. Recording Emergency Button Identification Announcements The JV35 comes with J.
E N G L I S H 4. After three seconds there will be a “beep” to tell you recording has stopped. Y our recording will be played back immediately so you can check it, followed by a “beep-beep” sound.
Operating your JV35 T one Pulse Preset Pr og Custom RINGER AUDIO OUTPUT ANNOUNCEMENT Lo Med Hi Fig. 24 - Custom Announcement T one Pulse Preset Pr og Custom RINGER AUDIO OUTPUT ANNOUNCEMENT Lo Med Hi Fig.
E N G L I S H Operating your JV35 5. Now you can repeat steps 3 and 4 if you want to change your announcement or if you want to record an announcement for a di f f er e n t Me m o r y bu t t on . 6. When you have finished recording, hang up the handset.
2. Slide the ANNOUNCEMENT switch to the PROG position. Y ou will hear “Program Mode, Program Mode,” followed by a “beep-beep” sound to confirm the JV35 is ready to be programmed. Operating your JV35 3. Press the 1 button. After the “beep,” say “One” in your own voice or language.
E N G L I S H Operating your JV35 N. Selecting Number B ut to n Ann o un ce me nt s T o hear the Number button announcements 6. When you are finished recording, hang up the handset. 7. Slide the ANNOUNCEMENT switch to the CUSTOM position. Y our announcements will be played when you press a Number button.
Fig. 31 - Preset Announcements T one Pulse Preset Prog Custom RINGER AUDIO OUTPUT ANNOUNCEMENT Lo Med Hi T one Pulse Preset Prog Custom RINGER AUDIO OUTPUT ANNOUNCEMENT Lo Med Hi Fig. 32 - Setting Custom Announcements T o hear the Number button announcements that you have recorded, slide the ANNOUNCEMENT switch to CUSTOM .
E N G L I S H Operating your JV35 When you have an assistive listening device connected, you still must speak into the handset. Note : The Audio Output por t is compatible with some neckloops. Please check with your hearing aid specialist. It can also be used with a cochlear implant.
• Speak into the hand set when using the cochlear implant adapter cord. W AR NING ! D urin g thu nde rsto rms, avoi d using telephones, as electric shock from lightning can occur .
T roubleshooting Char t If an y pr o bl em sho u ld ar i se d ur i ng o pe r at io n of yo u r JV35, go th ro ug h th e s ug ge s ti on s li s te d be l ow . Sho u ld t he di f fi cu lt y p er si st , c on ta ct Cl a ri ty or y ou r au t ho ri ze d de a le r fo r a ss is ta nc e .
E N G L I S H DECIBEL GAIN Maximum gain: 37dB at 3000Hz (V olume at Maximum setting and T one at High setting) PHYSICAL DIMENSIONS Size: 9.5" x 7" x 3.
4289 Bonny Oaks Drive Chattanooga, TN 37406 T el: 800-426-3738 • Fax: 800-325-8871 E-mail: claritycs@plantronics.
An important point after buying a device Clarity JV35 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clarity JV35 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clarity JV35 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clarity JV35 you will learn all the available features of the product, as well as information on its operation. The information that you get Clarity JV35 will certainly help you make a decision on the purchase.
If you already are a holder of Clarity JV35, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clarity JV35.
However, one of the most important roles played by the user manual is to help in solving problems with Clarity JV35. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clarity JV35 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
