Instruction/ maintenance manual of the product 51361001 Clarity
Go to page of 20
MHA 100 MOBILE HEADSET AMPLIFIER g PLANTRONICS..
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons including the following: I. Read and understand all instructions. 2.
Safety Instructions For Batteries Save These Instructions CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. To reduce the risk of fire or personal injury read and follow these instructions: Use only the approved battery in your telephone equipment.
5. Charge the battery (ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual. 6. Observe proper polarity orientation between the battery pack and the battery charger.
9. Zinc Air hearing aid batteries are dangerous if swallowed. If a battery should be accidentally swall6wed, see a doctor immed- iately or call the National Button Battery Hotline at 202-625-3333. 10. Recycling of your used hearing aid batteries helps to protect the environ- ment and conserves resources.
Features Volume Control Up/Down Belt Clip Coiled Cord for Cell Phone Connection On/Off LED (RED) 2.5mm Headset Jack Headset Connection Low Battery Indicator For IRED1 Diagram A.
Power Requirements This unit uses three (3) Zinc Air type 675 or AC675 batteries. Install the batteries in battery compartment before using. Diagram B. Battery Installation Battery Installation and Replacement Remove the battery door by sliding it off to the side of the MHA100.
Place the batteries into the MHA100 with the + (positive side) FACING UP. Replace the battery door by sliding it back on to the MHA100. NOTE: Please remove expired batteries to prevent leakage. Battery Life: 30-40 hours of continuous talk time depending on usage and volume setting.
required. Check with the manufacturer of the telephone equipment. 1. Plug the coiled cord (2.5mm) of the MHAl00 into your telephone's headset icck. 2. Plug the connector of the headset into the 2.5mm jack of the MHA100. 3. The MHA100 is sound/voice acti- vated.
telephone is iurned off, unplug the coiled cord from your phone. The unit will, and should turn off in about 10 seconds. If the MHA100 is still on after ten (1 0) seconds or more, remove the batteries. Low Battery Indicator The low battery indicator monitors the condition of the batteries.
5. Keep fresh batteries in your MHAl 00 and be aware that your MHA100 will stop functioning when the battery dies. TROUBLE SHOOTING Use this guide to heip solve some of the common problems the MHA100 may experience. If you have a problem not defined or one that persists, call your local retailer or our customer service department at 1-800-552-3368.
Readjust the volume until the squeal is gone. The telephone used with the MHAl00 volume is set too high. Readjust the volume until the squeal is gone. your headset may not be seated snugly in the ear.
provide reasonable protection against harmful interference in residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inter- ference to radio communications.
CAUTION: Changes or modifications not expressly approved by the manufac- turer responsible for compliance could void the user's authority to operate the equipment. Industry Canada Technical Specifications This product meets the applicable Industry Canada technical specifications.
equipment malfunctions, may give the te~ecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protec- tion that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together.
The party responsible for regulatory compliance: Clarity, A Division of Plantronics, Inc. 4289 Bonny Oaks Drive, Suite 1 06 Chattanooga, TN 37406 Phone: 1-800-552-3368 WARRANTY & SERVICE The following warranty and service information applies only to products purchased and used in the U.
Exclusions from Warranty This warranty applies only to defects in factory materials and factory workmanship. Any condition caused by accident, abuse, misuse or improper operation, violation of instruc.
for any incidental or consequential damages including without limitation, commercial loss or profit, or for any incidental expenses, expenses, loss of time, or inconvenience. Some states do not allow exclusion or limitation of inci- dental or consequential damage, so the above limitation or exclusion may not apply to you.
In Canada Plantronics Service Center 1455 Pitfield Boulevard Saint-Laurent Quebec H4S 1 G3 Tel: (800) 540-8363 (5 14) 956-8363 Fax: (51 4) 956-1 825 Please use the original container, or pack the unit(s) in a sturdy carton i with sufficient packing material to prevent damage.
02004 Clarity, a Division of Plantronics, Inc. All rights reserved. Plantronics, the logo design, Plantronics and the logo design combined and Clarity are trade- marks or registered trademarks of Plantronics, lnc.
An important point after buying a device Clarity 51361001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clarity 51361001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clarity 51361001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clarity 51361001 you will learn all the available features of the product, as well as information on its operation. The information that you get Clarity 51361001 will certainly help you make a decision on the purchase.
If you already are a holder of Clarity 51361001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clarity 51361001.
However, one of the most important roles played by the user manual is to help in solving problems with Clarity 51361001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clarity 51361001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
