Instruction/ maintenance manual of the product PEQ460 Clarion
Go to page of 8
.
INTRODUCTION The Clarion PEQ460 is a full-featured four-band parametric equalizer specifically designed for the mobile environment. Although it is housed in a one-half DIN enclosure, the PEQ460 provid.
18dB per octave electronic crossover that is continuously variable from 35Hz to 250Hz. Built into the PEQ460 is an auxiliary input that allows use with portable devices (such as an MP3 player) or a video system. CONTROL GLOSSAR Y • V olume Control - This is the master volume control for the system.
auxiliary source. • Equalizer Band Center Frequency Adjustment - This adjustment allows you to change the center frequency for each of the four frequency bands. • Equalizer Gain Controls - The parametric controls allow individual gain adjustment for each of the four frequency bands.
1. Check clearances on both sides of a planned installation before drilling any holes or installing any screws. 2. When routing RCAcables, keep them away from power cables and output speaker wires. 3. Do not allow liquids or foreign objects to enter the unit.
6 5. If you are using a source unit, without a remote turn-on lead, the PEQ460 can be turned on with a switched accessory lead. Y ou can find this accessory power source in the factory harness at the back of the radio. It is the lead that turns on and off with the key .
TROUBLESHOOTING Problem Unit does not work; no lights. Solution • Power wires are not connected. Check battery and ground wiring at unit; check battery connections. Problem Sound is distorted. Solution • Source unit volume is set too high. Reduce source unit volume.
661 W. Redondo Beach Blvd. Gardena, CA 90247 1-800-GO-CLARION www.clarion-usa.com PEQ460-10 Re v .1 (12/99).
An important point after buying a device Clarion PEQ460 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clarion PEQ460 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clarion PEQ460 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clarion PEQ460 you will learn all the available features of the product, as well as information on its operation. The information that you get Clarion PEQ460 will certainly help you make a decision on the purchase.
If you already are a holder of Clarion PEQ460, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clarion PEQ460.
However, one of the most important roles played by the user manual is to help in solving problems with Clarion PEQ460. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clarion PEQ460 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
