Instruction/ maintenance manual of the product MS5500 Clarion
Go to page of 24
MS5500_owner’s 1.34.qxd 12/6/99 12:15 PM Page 1.
C ongratulations on your purchase of the Ungo Security System. This Ungo Security System was designed in the heart of California’ s high-tech “Silicon V alley” by Ungo Security Corporation, a subsidiary of Clarion Corporation.
T able of Content s 1. About Y our System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1 2. Remote T ransmitters Remote T ransmitter Layout . . . . . . . . . . . . . . . . . . . . .
MS5500_owner’s 1.34.qxd 12/6/99 12:15 PM Page 4.
Ungo Security Systems are state-of-the-art vehicle protection systems equipped with features designed to: ❐ Deter potential intrusions to the vehicle by continually flashing the system LED status indicator while the system is Armed, giving a visual indication to any passer-by that the system is equipped with a security system.
Remote T ransmitter Layout Each MS5500 system comes with 2 multifunction Remote T ransmitters used to control nearly all of the system’s features. Each time a transmitter button is pressed, the LED will flash to indicate that a transmission is taking place.
The following diagram illustrates how the Remote T ransmitter controls the functions of the system when used in the Ungo S tandard Mode: Convenience Mode This configuration allows the MS5500 to operate with separate Arm and Disarm buttons for greater convenience and ease of use.
Page 4 - MS5500 Owner’s Manual Button 2 Disarms the system and at the same time activates Auxiliary Function 1 (which unlocks the driver ’s door). This Button also unlocks the doors when the system is in V alet Mode. If the system is Armed, pressing Button 2 will Disarm the system and unlock the driver’s door only .
MS5500 Owner’s Manual - Page 5 Adding a New T ransmitter into the System The MS5500 has the ability to recognize up to 20 individual Remote T ransmitters. If the vehicle is used by multiple drivers, each can have their own Remote T ransmitter. T o add Remote Transmitters: 1.
Battery T ype: 23A Page 6 - MS5500 Owner’s Manual Battery Replacement Y our Ungo Remote T ransmitter uses a 12 volt alkaline battery , which will need to be replaced from time to time. Under normal conditions, the battery should last for up to a year before it needs replacement.
MS5500 Owner’s Manual - Page 7 Remote Arming When Armed, the system monitors and protects 5 independent areas, or zones , including the ignition switch, doors, hood/trunk, Logic Sensor II, and an optional sensor . T o Arm the System: 1. T urn off the ignition.
Page 8 - MS5500 Owner’s Manual Remote Disarming T o Disarm the System: Press Button 1. • The siren will chirp twice.* • The doors will unlock. • The p arking lights will flash twice. • The dome light will turn on. • The LED will turn off. * The siren chirps during disarming will alert you if the system had been triggered while armed.
Arming Mode Selection Y our system can be set in one of the following Arming Modes: • Passive (automatic) Arming with chirp confirmation • Active Arming (by Remote Only) • Passive (automatic) Arming without chirp confirmation T o set the Arming Mode: 1.
In case your Remote T ransmitter becomes inoperable, or it is lost or stolen, you can still enter and drive your car by using the following procedure. Be sure that before you attempt this procedure you have your ignition key ready and that you know the location of the override switch.
MS5500 Owner’s Manual - Page 11 V alet Mode Allows you to temporarily disable the security system when the car is being serviced or turned over to a parking attendant. T o turn V alet Mode on or off: 1. T urn on the ignition. 2. Press and hold the override switch.
Page 12 - MS5500 Owner’s Manual Auxiliary Function Output s The system is equipped with two Auxiliary Function outputs that can be used to control a variety of additional features including, electric trunk release, remote car starter , power windows, power sunroof, auxiliary lighting, stereo system valet, garage door receiver , etc.
Remote Logic Sensor II Byp ass In case of extreme weather conditions such as high winds, the Logic Sensor II can be temporarily bypassed from the Remote Transmitter while the system is armed to prevent the system from false alarming. T o Bypass the Logic Sensor II: 1.
Page 14 - MS5500 Owner’s Manual Y ou can use this chart to quickly identify and interpret your system’s chirp indications and LED flashes. Reference Chart 1 chirp arming normal arming 1 + 3 chirps.
MS5500 Owner’s Manual - Page 15 T echnical Data Specifications Main Unit V oltage: 12v , negative ground Current Consumption: <5mA T emperature Range: -40 o F to +170 o F -40 o C to +77 o C Auxiliary Output Capability: 500mA Internal Relays: 12/28A T ransmitter Current Consumption: <.
Page 16 - MS5500 Owner’s Manual Notes MS5500_owner’s 1.34.qxd 12/6/99 12:15 PM Page 16.
MS5500 Owner’s Manual - Page 17 Notes MS5500_owner’s 1.34.qxd 12/6/99 12:15 PM Page 17.
Page 18 - MS5500 Owner’s Manual Notes MS5500_owner’s 1.34.qxd 12/6/99 12:15 PM Page 18.
MS5500 Owner’s Manual - Page 19 1. Ungo Security Corporation of Gardena, California ("Ungo Security") warrants this Ungo System to be free from defects in materials and workmanship and to comply with Ungo Security’s applicable printed specifications.
Ungo Security Corporation A Clarion Company 661 West Redondo Beach Blvd. Gardena, CA 90247 800-Go-Clarion www .clarionmultimedia.com © Ungo Security Corporation, Gardena, CA 98-MS5500-10 Rev .
An important point after buying a device Clarion MS5500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clarion MS5500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clarion MS5500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clarion MS5500 you will learn all the available features of the product, as well as information on its operation. The information that you get Clarion MS5500 will certainly help you make a decision on the purchase.
If you already are a holder of Clarion MS5500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clarion MS5500.
However, one of the most important roles played by the user manual is to help in solving problems with Clarion MS5500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clarion MS5500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
