Instruction/ maintenance manual of the product MS3200 Clarion
Go to page of 19
MS3001_owner's.qxd 9/10/99 5:27 PM Page 1.
C ongratulations on your purchase of the Ungo Security System. This Ungo Security System was designed in the heart of California’ s high-tech “Silicon V alley” by Ungo Security Corporation, a subsidiary of Clarion Corporation. Since its founding in 1975, Ungo has been recognized as a pioneer and long time industry leader in vehicle security .
T able of Contents 1. About Y our System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1 2. Remote T ransmitters Remote T ransmitter Layout . . . . . . . . . . . . . . . . . . . . . .
Ungo Security Systems are state-of-the-art vehicle protection systems equipped with features designed to: ❐ Deter potential intrusions to the vehicle by continually flashing the system LED status indicator while the system is Armed, giving a visual indication to any passer-by that the system is equipped with a security system.
Remote T ransmitter Layout Each MS3001 / MS3200 system comes with 2 multifunction Remote T ransmitters used to control nearly all of the system’s features. Each time a transmitter button is pressed, the LED will flash to indicate that a transmission is taking place.
The following diagram illustrates how the Remote T ransmitter controls the functions of the system: T wo Car Operation If you want to control two or more Ungo Security systems by a single Remote T ran.
Page 4 - MS3001 / MS3200 Owner’s Manual Adding a New T ransmitter into the System The MS3001 / MS3200 has the ability to recognize up to 21 individual Remote T ransmitters. If the vehicle is used by multiple drivers, each can have their own Remote T ransmitter .
MS3001 / MS3200 Owner’s Manual - Page 5 Battery T ype: 23A Battery Replacement Y our Ungo Remote T ransmitter uses a 12 volt alkaline battery , which will need to be replaced from time to time. Under normal conditions, the battery should last for up to a year before it needs replacement.
Page 6 - MS3001 / MS3200 Owner’s Manual Remote Arming When Armed, the system monitors and protects 5 independent areas, or zones , including the ignition switch, doors, hood/trunk, Shock Sensor , and an optional sensor. T o Arm the System: 1. T urn off the ignition.
MS3001 / MS3200 Owner’s Manual - Page 7 Remote Disarming T o Disarm the System: Press Button 1. • The siren will chirp twice.* • The doors will unlock. • The parking lights will flash twice. • The dome light will turn on. • The LED will turn off.
Arming Mode Selection Y our system can be set in one of the following Arming Modes: • Passive (automatic) Arming with chirp confirmation • Active Arming (by Remote Only) • Passive (automatic) Arming without chirp confirmation T o set the Arming Mode: 1.
Emergency Override In case your Remote T ransmitter becomes inoperable, or it is lost or stolen, you can still enter and drive your car by using the following procedure. Be sure that before you attempt this procedure you have your ignition key ready and that you know the location of the override switch.
Page 10 - MS3001 / MS3200 Owner’s Manual V alet Mode Allows you to temporarily disable the security system when the car is being serviced or turned over to a parking attendant. T o turn V alet Mode on or of f: 1. T urn on the ignition. 2. Press and hold the override switch.
MS3001 / MS3200 Owner’s Manual - Page 11 Dome Light Control As an option for increased safety and convenience, the system can be set, during the installation, to automatically turn on the dome light when you Disarm the system and when you turn off the ignition.
Auxiliary Function 2 - momentary / latched This Auxiliary Function has two selectable operating modes which can be programmed by your installer to allow custom operation of your vehicle and its accessories. Momentary - the system will provide an output for as long as the T ransmitter button is held.
MS3001 / MS3200 Owner’s Manual - Page 13 Y ou can use this chart to quickly identify and interpret your system ’ s chirp indications and LED flashes.
Page 14 - MS3001 / MS3200 Owner’s Manual T echnical Data Specifications Main Unit V oltage: 12v , negative ground Current Consumption: <13.5mA T emperature Range: -40 o F to +170 o F -40 o C to +77 o C Auxiliary Output Capability: 150mA Internal Relays: 12/28A T ransmitter Current Consumption: <.
MS3001 / MS3200 Owner’s Manual - Page 15 1. Ungo Security Corporation of Gardena, California ("Ungo Security") warrants this Ungo system to be free from defects in materials and workmanship and to comply with Ungo Security ’ s applicable printed specifications.
Ungo Security Corporation A Clarion Company 661 West Redondo Beach Blvd. Gardena, CA 90247 800-Go-Clarion www .clarionmultimedia.com © Ungo Security Corporation, Gardena, CA 97-MS3001-10 Rev .
An important point after buying a device Clarion MS3200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clarion MS3200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clarion MS3200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clarion MS3200 you will learn all the available features of the product, as well as information on its operation. The information that you get Clarion MS3200 will certainly help you make a decision on the purchase.
If you already are a holder of Clarion MS3200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clarion MS3200.
However, one of the most important roles played by the user manual is to help in solving problems with Clarion MS3200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clarion MS3200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
