Instruction/ maintenance manual of the product MS2106 Clarion
Go to page of 16
MS2106 MS2106 owner 7-14.qxd 7/14/2003 1:42 PM Page 1.
2 CONTENTS 1. Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. Ungo-Net Interface Introduction . . . . . . . . . . . . . . . . . . . . . . . 2 3. Remote Transmitter . . . . . . . . . . . . . . . . . . . .
3 1. FE ATURES Ungo Security Systems are state-of-the-art vehicle protection systems equipped with features designed to: Deter potential intrusions to the vehicle by continually flashing the system LED status indicator while the system is Armed, giving a visual indication to any passer-by that the vehicle is equipped with a security system.
4 1. Ungo-Net Interface Introduction This product is equipped with Ungo’s newest and most revolutionary technology to date, the Ungo-Net bus system. Ungo-Net is a network system that allows expansion, flexibilit y , and superior vehicle security through digital communication.
5 3. REMOTE TRANSMITTER 3.1 Remote Transmitter Layout The Ungo MS2106 comes with 2 Random Code Remote Transmitters used to control the system’s features. Each time a transmitter button is pressed, the LED will flash to indicate that a transmission is taking place.
6 3. SYSTEM OPER ATION 3.1 Arming Operation T o arm the alarm system, press Lock button on the transmitter: • The siren will chirp once. • The parking lights will flash once.* • The doors will lock.* • The LED will come on solid for 5 seconds, and then begin to flash.
7 3.5 Tamper Alert On Disarming, if the system responds with three chirps, indicating the system was triggered, turn on the ignition and the LED will flash the triggered zone 5 cycles.
8 3.10 Remote Panic Feature In the event of an emergency ( PANIC) situation, the system's siren can be triggered for 45 seconds to attract attention. T o activate the Panic feature, press and hold the Lock button for 3 seconds. • The siren will sound.
9 3.12 Valet Mode When placed into Valet Mode the security system will be disabled. However, the optional keyless entry and auxiliary outputs will still function if installed. T o enter the Valet Mode: 1. Be sure the alarm system is disarmed. 2. Press and hold the Valet/Override button.
10 3. Press the Lock button on the transmitter. • The siren will chirp once. 4. Press the Lock button on the transmitter again. • The siren will chirp twice. 5. Repeat steps 3 and 4 for each additional transmitter. 6. Turn OFF the ignition when transmitter programming is complete.
11 4. User Selectable Programming Options The Ungo MS2106 features a user selectable programming table allowing simple adjustments to match the user’s preferences. User Programming Options Table 4.1 User Programmable Options 1. Arming Mode: Selects whether or not the system will automatically Arm when ignition is turned off.
12 7. Remote Start in Valet Mode: Selects whether or not the remote start can be activated when the security system is in Valet mode. (Requires optional Ungo- Net remote start module.) 8. Automatic Starting: Selects whether or not the Ungo-Net start module can be programmed for automatic starting.
13 BUTTON Lock Unlock Trunk Lock Lock then Lock DUR ATION Short Short Long (3 Seconds) Long (3 Seconds) Short then Short FUNCTION Arm Disarm Auxiliary 1 Output Panic Remote Sensor Bypass Reference Charts 3.
14 6. WARRANTY INFORM ATION This Ungo Security System is warranted against defects in material and workmanship. The main unit and remote controls are covered by this limited lifetime warrant y. This Limited Lifetime Warranty applies to Ungo Security systems that have been installed by an authorized Ungo Security dealer.
15 7. INS TALLATION INFORM ATION Date of Installation: Installation Facility: Facility Address: Facility Phone Number: Location of Valet/Override: NOTES MS2106 owner 7-14.
Clarion Corporation of America 661 W. Redondo Beach Blvd. Gardena, CA 90247 www.clarion.com 97-MS2106-10 Re v. 1 (8/03) Ungo Security Corporation, Gardena, CA MS2106 owner 7-14.
An important point after buying a device Clarion MS2106 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clarion MS2106 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clarion MS2106 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clarion MS2106 you will learn all the available features of the product, as well as information on its operation. The information that you get Clarion MS2106 will certainly help you make a decision on the purchase.
If you already are a holder of Clarion MS2106, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clarion MS2106.
However, one of the most important roles played by the user manual is to help in solving problems with Clarion MS2106. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clarion MS2106 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
