Instruction/ maintenance manual of the product MS2007 Clarion
Go to page of 22
MS2007.qxd 09/24/2002 1:24 PM Page 1.
C ongratulations on your purchase of this Ungo System. Please read this manual thoroughly to familiarize yourself with your system’ s components and operation. Discuss any questions you might have with your installing dealer . Record the serial number of your Ungo System and keep all dealer records and receipts.
T able of Contents 1. About Y our System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1 2. Remote T ransmitters Remote T ransmitter Layout . . . . . . . . . . . . . . . . . . . . . .
MS2007.qxd 09/24/2002 1:24 PM Page 4.
The Ungo MS2007 is a state-of-the-art combination vehicle security and remote controlled car starter system. The MS2007 offers security features designed to deter and detect potential intrusions to your vehicle. It will alert and inform the driver and people in the vicinity of your vehicle when a zone is violated.
Page 2 - MS2007 Owner’s Manual Remote T ransmitter Layout The Ungo MS2007 comes with a multi-function LCD Remote T ransmitter featuring two-way communication with the vehicle. Each time a transmitter button is pressed, the LED will flash and the transmitter will beep to indicate that a transmission is taking place.
MS2007 Owner’s Manual - Page 3 2. Press transmitter Button 2 to set the hour . 3. Press transmitter Button 3 to set the minutes. Hold Button 3 to advance the minutes rapidly . • The hour will be displayed followed by either an “A” or “P” to indicate AM or PM.
2. Press and hold the V alet switch for 2-3 seconds. • The status LED and parking lights will flash 3 times. 3. Release the program switch. 4 Press Button 3* on each Remote T ransmitter . 5. T urn off the ignition. Any transmitters that were previously learned to this system and not included in this procedure will no longer operate this system.
MS2007 Owner’s Manual - Page 5 MS2007.qxd 09/24/2002 1:24 PM Page 5.
Page 6 - MS2007 Owner’s Manual Remote Arming When Armed, the system monitors and protects 3 independent areas, or zones , including the doors, hood/trunk, and shock sensor . T o Arm the system: 1. T urn off the ignition. 2. Press Button 1. • The siren/horn will chirp once.
MS2007 Owner’s Manual - Page 7 • The LCD will show and . • The LED will turn of f. * The siren chirps and light flashes during disarming will alert you if the system had been triggered while armed.
Page 8 - MS2007 Owner’s Manual Passive Arming When the Arming Mode has been set for Passive Arming , the system arms itself automatically , each time the ignition is turned off and all of the doors, hood and trunk are closed. T o start the Passive Arming Process: 1.
MS2007 Owner’s Manual - Page 9 Emergency Override In case your Remote T ransmitter becomes inoperable, or it is lost or stolen, you can still enter and drive your car by using the following procedure. Be sure that you have your ignition keys ready and that you know the location of the Override switch before you perform this procedure.
Page 10 - MS2007 Owner’s Manual Remote Starting T o Remote Start the System: 1. Be sure the System is not in V alet Mode. 2. Press Button 4. • The LCD will show . • The parking lights will turn on. • The siren will chirp 3 times (if the system is Armed, the shock sensor will turn off).
MS2007 Owner’s Manual - Page 11 3. Release the brake pedal. 4. Remove the key from the ignition switch. 5. Y ou may now exit the vehicle, arm the alarm and lock the doors. T o re-enter the vehicle and resume driver control: 1. Disarm the alarm by pressing Button 2 on the Remote T ransmitter .
V alet Mode Allows you to temporarily disable the security system when the car is being service or turned over to a parking attendant. T o turn V alet Mode on or off: 1. T urn on the ignition. 2. Press and hold the override switch. 3. While holding the override switch, turn off the ignition.
Auxiliary Function This function will operate regardless of whether the system is armed or disarmed. T o operate the auxiliary function, press Button 3.
Notes Page 14 - MS2007 Owner’s Manual MS2007.qxd 09/24/2002 1:24 PM Page 14.
MS2007 Owner’s Manual - Page 15 Y ou can use this chart to quickly identify and interpret your system’s chirp indications and LED flashes. Reference Chart 1 chirp arming normal arming 1 + 4 chirps.
Page 16 - MS2007 Owner’s Manual Y ou can use these tables to quickly identify and interpret the MS2007’s parking light and LED indications. T echnical Data System Indications Specifications Main U.
MS2007 Owner’s Manual - Page 17 1. Ungo Security Corporation of Gardena, California ("Ungo Security") warrants this Ungo system to be free from defects in materials and workmanship and to comply with Ungo Security’s applicable printed specifications.
Ungo Security Corporation A Clarion Company 661 West Redondo Beach Blvd. Gardena, CA 90247 800-Go-Clarion www .clarion-usa.com © Ungo Security Corporation, Gardena, CA 97-MS2007-10 Rev .
An important point after buying a device Clarion MS2007 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clarion MS2007 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clarion MS2007 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clarion MS2007 you will learn all the available features of the product, as well as information on its operation. The information that you get Clarion MS2007 will certainly help you make a decision on the purchase.
If you already are a holder of Clarion MS2007, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clarion MS2007.
However, one of the most important roles played by the user manual is to help in solving problems with Clarion MS2007. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clarion MS2007 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
