Instruction/ maintenance manual of the product MS2005 Clarion
Go to page of 20
MS2005BO.QXD 6/27/2002 2:25 PM Page 1.
C ongratulations on your purchase of this Ungo System. Please read this manual thoroughly to familiarize yourself with your system’s components and operation. Discuss any questions you might have with your installing dealer. Record the serial number of your Ungo System and keep all dealer records and receipts.
Table of Contents 1. About Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1 2. Remote Transmitters Remote Transmitter Layout . . . . . . . . . . . . . . . . . . . . . . . .
MS2005BO.QXD 6/27/2002 2:25 PM Page 4.
The Ungo MS2005 is a state-of-the-art combination vehicle security and remote controlled car starter system. The MS2005 offers security features designed to deter and detect potential intrusions to your vehicle. It will alert and inform the driver and people in the vicinity of your vehicle when a zone is violated.
Page 2 - MS2005 Owner’s Manual Remote Transmitter Layout The Ungo MS2005 comes with 2 multi-function Remote Transmitters used to control nearly all of the system’s features. Each time a transmitter button is pressed, the LED will flash to indicate that a transmission is taking place.
MS2005 Owner’s Manual - Page 3 Battery Replacement Your Ungo Remote Transmitter uses a 12 volt alkaline battery, which will need to be replaced from time to time. Under normal conditions, the battery should last for up to a year before it needs replacement.
Page 4 - MS2005 Owner’s Manual Remote Arming When Armed, the system monitors and protects 3 independent areas, or zones , including the doors, hood/trunk, and shock sensor. To Arm the system: 1. Turn off the ignition. 2. Press Button 1. • The siren/horn will chirp once.
MS2005 Owner’s Manual - Page 5 * The siren chirps and light flashes during disarming will alert you if the system had been triggered while armed. 2 chirps / 2 flashes = normal disarming 3 chirps / 3.
Page 6 - MS2005 Owner’s Manual To start the Passive Arming Process: 1. Turn off the ignition.* • The status LED will begin to flash quickly. 2. Open the door and exit the vehicle. • Once all doors are closed and the dome light is turned off, the LED will turn off.
MS2005 Owner’s Manual - Page 7 3. Turn ignition key on. 4. Within 4 seconds, press and hold the Override switch. • The system will disarm. 5. You can now start and drive the car. Note: During installation, your installer can program the system to give 10 second entry delay when the system Arms passively.
Page 8 - MS2005 Owner’s Manual Remote Starting To Remote Start the System: 1. Be sure the System is not in Valet Mode. 2. Press Button 4. • The parking lights will turn on. • T he siren will chirp 3 times (if the system is Armed, the shock sensor will turn off).
MS2005 Owner’s Manual - Page 9 To re-enter the vehicle and resume driver control: 1. Disarm the alarm by pressing Button 2 on the Remote Transmitter.* • The doors will unlock.* 2. Turn on the ignition. 3. Press the brake pedal to disengaged the MS2005.
Valet Mode Allows you to temporarily disable the security system when the car is being service or turned over to a parking attendant. To turn Valet Mode on or off: 1. Turn on the ignition. 2. Press and hold the override switch. 3. While holding the override switch, turn off the ignition.
Dome Light Control The dome light will turn on for 20 seconds when the system is disarmed (or unlocked in Valet Mode) using the Remote Transmitter. Auxiliary Function This function will operate regardless of whether the system is armed or disarmed and will stay active for as long as the Button 3 is held.
Notes Page 12 - MS2005 Owner’s Manual MS2005BO.QXD 6/27/2002 2:25 PM Page 12.
MS2005 Owner’s Manual - Page 13 You can use this chart to quickly identify and interpret your system’s chirp indications and LED flashes. Reference Chart Output When Status 1 chirp 1 + 4 chirps ar.
Page 14 - MS2005 Owner’s Manual You can use these tables to quickly identify and interpret the MS2005’s parking light and LED indications. Technical Data System Indications Specifications Main Uni.
MS2005 Owner’s Manual - Page 15 1. Ungo Security Corporation of Gardena, California ("Ungo Security") warrants this Ungo system to be free from defects in materials and workmanship and to comply with Ungo Security’s applicable printed specifications.
Ungo Security Corporation A Clarion Company 661 West Redondo Beach Blvd. Gardena, CA 90247 800-Go-Clarion www.clarion-usa.com © Ungo Security Corporation, Gardena, CA 97-MS2005-10 Rev.
An important point after buying a device Clarion MS2005 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clarion MS2005 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clarion MS2005 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clarion MS2005 you will learn all the available features of the product, as well as information on its operation. The information that you get Clarion MS2005 will certainly help you make a decision on the purchase.
If you already are a holder of Clarion MS2005, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clarion MS2005.
However, one of the most important roles played by the user manual is to help in solving problems with Clarion MS2005. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clarion MS2005 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
