Instruction/ maintenance manual of the product EQS560 Clarion
Go to page of 8
.
INTRODUCTION The Clarion EQS560 is a full-featured five-band stereo equalizer specifically designed for the mobile environment. Although it is housed in a one-half DIN enclosure, the EQS560 provides a.
CONTROL GLOSSAR Y • V olume Control - This is the master volume control for the system. • Fader Control - This is used to balance the sound between the front and rear speakers. • Aux Switch - This allows you to select between the main input and an auxiliary source.
• Low-Pass Frequency Switch - This allows the subwoofer crossover frequency to be set at 60Hz or 90Hz. • Subwoofer Level Control - This is the volume control for the subwoofer . The subwoofer level control allows you to adjust the subwoofer volume at any time to match any listening preference.
4. If the unit should become wet, turn off all power and ask your authorized Clarion dealer to clean or service the unit. WIRING PRECAUTIONS Read all wiring precautions. If you are not sure of the connections, contact your authorized Clarion dealer . 1.
6 SYSTEM SET -UP Setting System V olume After completing the system wiring, follow the steps below to properly adjust the EQS560. 1. T urn the master volume control on the EQS560 and the amplifier gain controls to their minimum setting.
4. Adjust the auxiliary input gain controls, located on the top panel of the EQS560, so that the volume of the auxiliary source matches the volume of the main source. TROUBLESHOOTING Problem Unit does not work; no lights. Solution • Power wires are not connected.
661 W. Redondo Beach Blvd. Gardena, CA 90247 1-800-GO-CLARION www.clarion-usa.com PEQ460-10 Rev .1 (12/99).
An important point after buying a device Clarion EQS560 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clarion EQS560 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clarion EQS560 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clarion EQS560 you will learn all the available features of the product, as well as information on its operation. The information that you get Clarion EQS560 will certainly help you make a decision on the purchase.
If you already are a holder of Clarion EQS560, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clarion EQS560.
However, one of the most important roles played by the user manual is to help in solving problems with Clarion EQS560. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clarion EQS560 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
