Instruction/ maintenance manual of the product CC-2011E Clarion
Go to page of 10
CC-2 0 1 1E Owner’s manual & Installation manual Mode d’emploi et manuel d’installation Bedienungs- und Montageanleitung Manuale di istruzioni e di installazione Gebruiksaanwijzing & Mon.
2 CC-2011E 284-0877-01 English Français Deutsch Italiano Nederlands Español Svenska Português Thank you for purchasing this Clarion product. ∗ Please read this owner ’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.
284-0877-01 CC-2011E 3 English • This device has been designed exclusively for use with a vehicular mounted rear-view television system. It should not be used for other purposes. • Disconnect the vehicle’ s negative (–) terminal when installing wiring.
4 CC-2011E 284-0877-01 English 3. SPECIFICA TIONS Power source/voltage: DC 9 V (±0.5 V) Power consumption: 120 mA or less Image sensor: 1/4" solid-state color CCD Angle of view: About 130° (hor.
284-0877-01 CC-2011E 5 English 4. OPERA TION Operation when using Clarion rear-view camera system The rear-view image is displayed when the transmission is placed into reverse, or when the manual switch is operated. T roubleshooting The following symptoms are not malfunctions.
6 CC-2011E 284-0877-01 English 5. INST ALLA TION Before installation • Before installing the camera or its wiring, read all safety warnings and be sure to install the unit correctly .
284-0877-01 CC-2011E 7 English Installing/Wiring the camera 2. Install mounting bracket A Using the supplied 2 installation screws (hex head M3 x 6), fasten bracket A to bracket B. • While tightening the screws, adjust the angle of the bracket A to produce the optimum camera angle.
8 CC-2011E 284-0877-01 English Installing/Wiring the camera When the camera angle has been changed, the range displayed by the image on the monitor will change. Always confirm by direct observation when backing the vehicle. ■ Adjusting camera angle (example) Adjust the angle of brackets A+B as required by the mounting position.
284-0877-01 CC-2011E 9 English W iring Exclusive waterproof relay cable (sold separately) Inside the vehicle Outside the vehicle Securely tighten the connectors.
10 CC-2011E 284-0877-01.
An important point after buying a device Clarion CC-2011E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clarion CC-2011E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clarion CC-2011E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clarion CC-2011E you will learn all the available features of the product, as well as information on its operation. The information that you get Clarion CC-2011E will certainly help you make a decision on the purchase.
If you already are a holder of Clarion CC-2011E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clarion CC-2011E.
However, one of the most important roles played by the user manual is to help in solving problems with Clarion CC-2011E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clarion CC-2011E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
