Instruction/ maintenance manual of the product Grand C4 Picasso (2013) Citroën
Go to page of 256
Copyright CITROEN - Compiled by C4owners.org.
4 F A M I L I A R I S A T I O N Panoramic glass roof 81 Xenon directional headlamps Whether on dipped or main beam, this function allows the lighting to follow the direction of the road ahead.
5 F A M I L I A R I S A T I O N A. Central locking B. Unlocking C. Guide-me-home lighting D. Key release/storage Press on control A , located on the con- trol panel to the left of the dashboard. The fuel fl ap automatically opens up fully . Insert the nozzle so as to push in the metallic gate valve B .
6 F A M I L I A R I S A T I O N This opening gives easy access to the boot, even if you are parked close to a wall or to another vehicle. Opening rear screen Opening Press on control 2. The handhold 4 is in line with the rear wiper . Closing Lower the rear screen.
7 F A M I L I A R I S A T I O N Grand C4 Picasso T orch Pneumatic rear suspension Allows the height of the rear of the vehicle to be adjusted Access to spare wheel Puncture repair kit Depending on mod.
8 F A M I L I A R I S A T I O N 6-speed electronic gearbox This offers a fully automatic mode, a manual mode and an auto-sequential mode which combines the advan- tages of the automatic and manual modes, using the levers on the steer- ing wheel.
9 F A M I L I A R I S A T I O N Fold the concertina boards ( 1 2 3 ) ar- ranged above each of the third-row seats. Pull on the black strap F , located on the seat backrest. 6 4 Before moving the third-row seats, do not forget to lock in the rigid pan- els fi rst (located at the base of the second-row seat backrests).
10 F A M I L I A R I S A T I O N Folding the seats From the boot - whilst loading, for example (Grand C4 Picasso) T ake care to attach the third-row pas- senger seat belts to the rings provided for this purpose. Do not attach the belts to the load anchorage points marked with a red cross (see illustration above).
11 F A M I L I A R I S A T I O N SECOND - ROW SEA TS The 3 second-row seats are independ- ent of each other and are all the same width. They can all be adjusted to the "comfort" position.
12 F A M I L I A R I S A T I O N DASHBOARD Copyright CITROEN - Compiled by C4owners.org.
13 F A M I L I A R I S A T I O N 13. Controls: ● T rip mileage recorder reset button ● Lighting rheostat ● CHECK or COLOR (choice of background colour) ● Personalisation 14. Warning lamps display (NaviDrive) 15. Central air vents 16. Electric parking brake 17.
14 F A M I L I A R I S A T I O N Front seats Head restraint Backrest angle Seat height adjustment Lumbar support Longitudinal adjustment Armrest Electric adjustments Manual adjustments 58 Heated seat control (located on the inside of the front seats) 5 7 1.
15 F A M I L I A R I S A T I O N Adjusting the steering wheel The steering wheel can be adjusted for height and reach. Unlock the steering wheel by pulling control A towards you. Adjust the position of the steering wheel then lock it pushing the control fuly back.
16 F A M I L I A R I S A T I O N Adjusting the seat belt height T o adjust the seat belt, squeeze the control and slide it in the direction re- quired. 1 1 7 From the driver’s seat position, the con- trols located on the door are used to op- erate the electric windows.
17 F A M I L I A R I S A T I O N Ring B Ring D: rear screen wipe Stop. Intermittent. T imed wash and wipe. Fixed centred controls steering wheel Lighting control Ring A 8 5 Control C: windscreen wipe 8 9 DRIVING 1. Off 2. Automatic lighting 3.
18 F A M I L I A R I S A T I O N 6-Speed electronic gearbox system R Reverse N Neutral A Automatic mode M Manual mode Using control paddles 1 "+" and 2 "-" : - gear changing in manual mode, - temporary manual operation in au- tomatic mode.
19 F A M I L I A R I S A T I O N 148 Electric parking brake Before leaving the vehicle, check that the electric parking brake warn- ing lamp P (red) is permanently on. If you leave the vehicle with the en- gine running, manually apply the parking brake.
20 F A M I L I A R I S A T I O N Driver's and front passenger's control panel Automatic air conditioning Rear passengers' control panel VENTILA TION 1. Automatic comfort regulation. 2. Adjustment and display of driver's temperature.
21 F A M I L I A R I S A T I O N Heating and manual air conditioning Passenger's control panel Driver's control panel VENTILA TION 1. Adjustment and display of air blower speed. 2. Adjustment and display of air distri- bution. 3. Mode of adjustment of passenger's temperature.
22 F A M I L I A R I S A T I O N Seat belts not fastened/ unfastened warning lamp This warning lamp informs you if the driver ’ s or front passen- ger ’ s seat belt is not fastened (depending on model), and if the front passenger’s (depend- ing on model) or the second- row passengers’ seat belts are unfastened.
23 F A M I L I A R I S A T I O N Deactivation of front passenger airbag Child safety The 3 second-row rear seats of your vehicle are fi tted with regulation ISOFIX anchoring points, with 3 rings for each seat position A B C. This fi xing system is designed for chil- dren weighing up to 18 kg.
24 I INSTRUMENTS and CONTROLS MONOCHROME INSTRUMENT P ANEL MUL TIFUNCTION SCREEN A The instrument panel groups all the driving and comfort information at the centre of the dashboard. Central display 1. Rev counter 2. Electronic gearbox or automatic gearbox selector position and gear 3.
25 I INSTRUMENTS and CONTROLS TWO - TONE INSTRUMENT P ANEL MUL TIFUNCTION SCREEN C The instrument panel groups all the driving and comfort information at the centre of the dashboard. Central display 1. Rev counter 2. Electronic gearbox or automatic gearbox selector position and gear 3.
26 I INSTRUMENTS and CONTROLS NA VIDRIVE INSTRUMENT P ANEL NA VIDRIVE MUL TIFUNCTION SCREEN The instrument panel groups all the driving and comfort information at the centre of the dashboard. Central display 1. Cruise control or speed limiter setting 2.
27 I INSTRUMENTS and CONTROLS Indicator and warning lamps When the ignition is switched on The warning lamps come on for a few seconds when the vehicle's igni- tion is switched on. When the engine is started, these warning lamps should switch off.
28 I INSTRUMENTS and CONTROLS "Foot on brake" The fl ashing of this warning lamp on the display informs you that you need to press the brake pedal in order to be able to start the engine on a vehicle with the (6-speed) Electronic Gearbox System, or to quit position P in the case of an automatic gearbox.
28 I INSTRUMENTS and CONTROLS "Foot on brake" The fl ashing of this warning lamp on the display informs you that you need to press the brake pedal in order to be able to start the engine on a vehicle with the (6-speed) Electronic Gearbox System, or to quit position P in the case of an automatic gearbox.
29 I INSTRUMENTS and CONTROLS Lighting is associated with the displaying of another warning light: Service If this comes on, it indi- cates the occurrence of a problem in one of the systems which does not have a specifi c warning light. In order to identify it, consult the message on the multifunction dis- play .
30 I INSTRUMENTS and CONTROLS Airbags If this comes on, it indicates the occurrence of a fault in one of the airbag or seat belt pretensioner systems. Maximum coolant temperature If this comes on, it indicates that the temperature in the cooling system is too high.
31 I INSTRUMENTS and CONTROLS Maintenance indicator System which informs the driver when the next service is due, in accordance with the manufacturer's servicing schedule. The point at which the service is due is calculated from the last indicator zero reset.
32 I INSTRUMENTS and CONTROLS Maintenance indicator zero reset Engine oil level indicator After each service, the maintenance indicator must be reset to zero.
32 I INSTRUMENTS and CONTROLS Maintenance indicator zero reset Engine oil level indicator After each service, the maintenance indicator must be reset to zero.
33 I INSTRUMENTS and CONTROLS T otal distance recorder System which measures the total distance travelled by the vehicle during its life. The total and trip distances are dis- played for thirty seconds when the ignition is switched off, when the driver's door is opened and when the vehicle is locked or unlocked.
34 II MUL TIFUNCTION SCREENS MUL TIFUNCTION SCREEN A Presentation 1. Time 2. Date and display zone 3. Ambient temperature When the ambient temperature is between +3 °C and -3 °C, the tem- perature display fl ashes (ice risk).
35 II MUL TIFUNCTION SCREENS Displaying the log of alerts Press on A . Use B to select the submenu for options. Confi rm with two press- es on C . Y ou can cancel the start of the dis- play by pressing button E to aban- don and validating by pressing C .
36 II MUL TIFUNCTION SCREENS MUL TIFUNCTION SCREEN C Main Menu Presentation Radio-CD (see "Audio and T elematics") T rip computer This permits: Bluetooth ® handes-free kit (see "Audio" and T elematics) Controls 1. Time 2. Ambient temperature 3.
37 II MUL TIFUNCTION SCREENS Personalisation- Configuration This permits activation/deactivation of the: - operation of the rear wiper , - automatic guide-me-home lighting, - Xenon dual-function direc.
38 II MUL TIFUNCTION SCREENS Activating/deactivating the electronic parking brake automatic functions (application/release) * Press on A . Use B to select "Personalisation- Confi guration", then confi rm your choice with a press on C .
39 II MUL TIFUNCTION SCREENS Choosing the units Press on A . Use B to select "Personalisation- Confi guration", then confi rm your choice with a press on C . Select the display confi guration us- ing B . Confi rm with a press on C .
40 II MUL TIFUNCTION SCREENS NA VIDRIVE MUL TIFUNCTION COLOUR SCREEN Presentation 1. Ambient temperature 2. Directory 3. Date 4. T elephone 5. Time When the ambient temperature is be- tween +3 °C and -3 °C, the tempera- ture display fl ashes (risk of ice).
41 II MUL TIFUNCTION SCREENS TRIP COMPUTER System which provides current information concerning the route travelled (range, consumption...). Monochrome screen A Data displays Press the control for more than two seconds to reset to zero the distance travelled, the average consumption and the average speed.
42 II MUL TIFUNCTION SCREENS TRIP COMPUTER System which provides current in- formation concerning the route trav- elled (range, consumption, …). Monochrome screen C NaviDrive colour screen Display o.
43 II MUL TIFUNCTION SCREENS "T rip computer" menu System which provides general in- formation concerning the status of certain equipment with which your vehicle is equipped, such as the alert log, the status of the functions.
44 II MUL TIFUNCTION SCREENS A few definitions… Range (km or miles) This fi gure may vary following a change in the style of driving or the relief, resulting in a signifi cant change in the current consumption. When the range falls below 20 miles (30 km), dashes are displayed.
45 III COMFOR T RECOMMENDED SETTINGS FOR THE VENTILA TION, HEA TING AND AIR CONDITIONING Air inlet Check that the exterior grille for the air inlet, at the bottom of the wind- screen, is clean and free of dead leaves, snow , etc. Air distribution 1. Windscreen demisting/defrosting vents.
46 III COMFOR T Air conditioning T o ensure that your system operates correctly , it is recommended to have it checked regularly . W ater arising from condensation in the air conditioning drains away through a hole provided for this pur- pose. A pool of water may thus form under the vehicle when stationary .
47 III COMFOR T MANUAL AIR CONDITIONING A. DRIVER’S CONTROL P ANEL 1. Adjustment of the air blower speed The air blower adjustment only op- erates when the engine is running. T o adjust the air fl ow , press on button 1 : to increase the fl ow of air , to decrease the fl ow of air .
48 III COMFOR T 6. Demisting/defrosting of the rear screen This operates only if the engine is running. Press on button 6 to activate/de- activate the electric demisting/ defrosting of the rear screen and the exterior rear view mirrors. The warning lamp lights up.
54 III COMFOR T RECOMMENDED INTERIOR SETTINGS - Heating/Manual air conditioning T o make the best use of the system, we recommend: - Automatic air conditioning With automatic air conditioning, you are recommended to choose AUTO operation. Action T o have Cold or Max.
49 III COMFOR T A U T O M A T I C A I R CONDITIONING A. DRIVER’S CONTROL P ANEL 1. Automatic comfort regulation A press on this button, con- fi rmed by the display of the A/C warning lamp and of AU.
50 III COMFOR T 3. Adjustment of the air blower speed The air blower operates only when the engine is running (except when the REST function is activated). T o adjust the fl ow of air , press on the button: to increase the air fl ow , to decrease the air fl ow (this button also has the REST function).
51 III COMFOR T Closing of the air inlet Press on button 5 to close off the entry of air from outside. Entry of air (manual mode) Press on button 5 to activate en- try of air from the outside. The warning lamp goes out. Press once on button 5 to return to the initial status (entry of air in automatic mode).
52 III COMFOR T 9 . Rapid demisting/defrosting of the front and rear windows - Press on button 9 . The warning lamp lights up. This function gives a rapid demisting/defrosting of the vehicle simultane.
54 III COMFOR T RECOMMENDED INTERIOR SETTINGS - Heating/Manual air conditioning T o make the best use of the system, we recommend: - Automatic air conditioning With automatic air conditioning, you are recommended to choose AUTO operation. Action T o have Cold or Max.
51 III COMFOR T Closing of the air inlet Press on button 5 to close off the entry of air from outside. Entry of air (manual mode) Press on button 5 to activate en- try of air from the outside. The warning lamp goes out. Press once on button 5 to return to the initial status (entry of air in automatic mode).
52 III COMFOR T 9 . Rapid demisting/defrosting of the front and rear windows - Press on button 9 . The warning lamp lights up. This function gives a rapid demisting/defrosting of the vehicle simultane.
54 III COMFOR T RECOMMENDED INTERIOR SETTINGS - Heating/Manual air conditioning T o make the best use of the system, we recommend: - Automatic air conditioning With automatic air conditioning, you are recommended to choose AUTO operation. Action T o have Cold or Max.
53 III COMFOR T ADDITIONAL AIR CONDITIONING Additional air conditioning allows you to optimise comfort levels in warm weather conditions. It produces ad- ditional fresh air which is supplied using the rear air vents. The supply of warm air via the rear air vents is not possible using this system.
55 III COMFOR T SCENTED AIR FRESHENER The scented air freshener releases a fragrance into the passenger com- partment via the central air vents. Rotate the button A to adjust (to the left to reduce, to the right to increase) or stop (maximum to the left) the fl ow of scented air .
56 III COMFOR T The recharge for the air freshener consists of a cartridge B and its sealed container C . Remove the protective fi lm D . Place the head of the cartridge B o n the button A of the air freshener . Rotate it a quarter turn to lock it on the button and remove the container .
57 III COMFOR T F R O N T S E A T S MANUAL ADJUSTMENTS 1. Longitudinal adjustment Raise the control bar , then slide the seat to the position desired. 2. Lumbar support Rotate the control until you attain the position desired. 3. Seat height adjustment Raise or lower the the control the number of times necessary to obtain the position desired.
58 III COMFOR T FRONT SEA TS 1 . Adjustment of the seat height and angle, forwards-backwards 2 . Adjustment of backrest angle and lumbar support The seats can also be adjusted elec- trically for a short period: - on opening one of the front doors, - after switching off the ignition.
59 III COMFOR T Storing driving positions System which takes into account the electrical settings of the driver's seat and exterior mirrors. It enables you to store up to two positions using the buttons on the side of the driver's seat. Storing a position Using buttons M/1/2 Switch on the ignition.
60 III COMFOR T REAR HEAD RESTRAINTS The rear head restraints can be removed and have two positions; - high, position for use, - low , storage position. T o raise a head restraint, pull it upwards. T o lower it, press the lug then the head restraint. T o remove it, place it in the high position, push the lug and pull it upwards.
61 III COMFOR T SECOND ROW SEA TS (C4 PICASSO) Folding the seat Each seat can be folded onto the fl oor to enable you to modify your vehicle’s interior space. Pull fi rmly upwards on strap C , as indicated by the red arrow , to unlock the seat; keep pulling un- til the seat is fully folded.
60 III COMFOR T REAR HEAD RESTRAINTS The rear head restraints can be removed and have two positions; - high, position for use, - low , storage position. T o raise a head restraint, pull it upwards. T o lower it, press the lug then the head restraint. T o remove it, place it in the high position, push the lug and pull it upwards.
62 III COMFOR T SECOND ROW SEA TS (GRAND C4 PICASSO) Each seat can be folded onto the fl oor to form a fl at surface, thus en- abling you to modify your vehicle’ s interior space.
63 III COMFOR T "Cinema seat" position This position allows you to free up space between the fi rst row and the second row . Pull the control E under the seat. This position is only possible with the lateral seats. Access to the third row seats The third-row seats can be accessed via the lateral second-row seats.
64 III COMFOR T THIRD ROW SEA TS (GRAND C4 PICASSO) Concertina boards T wo rigid concertina boards, which cannot be separated from the ve- hicle, cover the 2 third-row seats, when these are in the folded position. Folding the concertina boards Pull on the control, the 3 sections of the board will fold like a concertina.
65 III COMFOR T SEA T MODULARITY AND V ARIOUS CONFIGURA TIONS Examples of seat configurations C4 Picasso 5 seats 4 seats 3 seats Maximum loadspace Examples of seat configurations Grand C4 Picasso 7 se.
66 III COMFOR T MIRRORS Exterior mirrors Each mirror is adjustable to provide the rear view needed for overtaking or parking. They can also be folded for parking in confi ned spaces.
67 III COMFOR T Interior mirror Adjustable mirror providing a central rearward view . Manual model The mirror is fi tted with a night-time anti-dazzle device. Adjustment Adjust the mirror so that the glass is directed correctly in the "day" position.
68 IV ACCESS REMOTE CONTROL KEY System which permits central un- locking or locking of the vehicle us- ing the lock or remotely . It is also used to locate the vehicle, activate the guide-me-home lighting and start the engine, as well as providing protection against theft.
69 IV ACCESS Normal locking using the key T urn the key to the right in the driver's door lock to lock the ve- hicle completely . Locking is confi rmed by fi xed lighting of the direction indicators for approxi- mately two seconds. According to version, the exterior mirrors fold at the same time.
70 IV ACCESS Deadlocking using the key Turn the key to the right in the driver's door lock to lock the ve- hicle completely and hold it in this position for more than two sec- onds to close the windows auto- matically in addition to locking. T urn the key to the right again within fi ve seconds to deadlock the vehicle.
71 IV ACCESS S T A R T I N G 1. "S": Steering lock T o unlock the steering, gently move the steering wheel while turning the key , without forcing it. 2. "M": Drive position Depending on the version of your vehicle, the orange and red warning lamps should also come on for a short time.
72 IV ACCESS Remote control problem Following disconnection of the ve- hicle battery , replacement of the re- mote control battery or in the event of a remote control malfunction, you can no longer unlock, lock or locate your vehicle. First of all, use the key in the lock to unlock or lock your vehicle.
73 IV ACCESS Lost keys Visit a CITROËN dealer with the vehicle's V5 registration document and your personal identifi cation documents. The CITROËN dealer will be able to retrieve the key code and the trans- ponder code required to order a replacement key .
70 IV ACCESS Deadlocking using the key Turn the key to the right in the driver's door lock to lock the ve- hicle completely and hold it in this position for more than two sec- onds to close the windows auto- matically in addition to locking. T urn the key to the right again within fi ve seconds to deadlock the vehicle.
73 IV ACCESS Lost keys Visit a CITROËN dealer with the vehicle's V5 registration document and your personal identifi cation documents. The CITROËN dealer will be able to retrieve the key code and the trans- ponder code required to order a replacement key .
71 IV ACCESS S T A R T I N G 1. "S": Steering lock T o unlock the steering, gently move the steering wheel while turning the key , without forcing it. 2. "M": Drive position Depending on the version of your vehicle, the orange and red warning lamps should also come on for a short time.
72 IV ACCESS Remote control problem Following disconnection of the ve- hicle battery , replacement of the re- mote control battery or in the event of a remote control malfunction, you can no longer unlock, lock or locate your vehicle. First of all, use the key in the lock to unlock or lock your vehicle.
74 IV ACCESS A L A R M System which protects and provides a deterrent against the theft of your vehicle. It provides two types of pro- tection, exterior and interior , as well as an anti-tamper function. Exterior protection The system detects opening of the vehicle.
75 IV ACCESS T riggering This is indicated by sounding of the siren and fl ashing of the direction indicators for approximately thirty seconds. After it has been triggered, the alarm is again operational. If the alarm is triggered ten times in succession, the eleventh time will result in it becoming inactive.
76 IV ACCESS ELECTRIC WINDOWS System intended to open or close a window manually or automatically . Fitted with a safety anti-pinch sys- tem and a system for deactivation in the event of misuse of the rear controls. 1. Driver's electric window control.
77 IV ACCESS Reinitialisation If a window does not rise automatically , its operation must be reinitialised: pull the control until the window stops, release the control and pull it again unti.
78 IV ACCESS D O O R S Opening From outside When the selective unlocking is activated, the fi rst press of the remote control unlocking button permits unlocking of the driver's door only . Pull on the front door control to open the door; this unlocks the vehicle completely .
79 IV ACCESS Unlocking Press button A again to unlock the vehicle. The red indicator lamp on the button switches off. If the vehicle is locked or dead- locked from the outside, the red in- dicator lamp fl ashes and button A is inactive. In this case, use the remote control or the key to unlock the vehicle.
80 IV ACCESS B O O T After unlocking the vehicle com- pletely using the remote control or the key , with the rear screen closed, pull on the handle 1 and raise the tailgate. Lower the tailgate using one of the two handholds 3 , located on the interior boot trim.
81 IV ACCESS Emergency boot lid release System for mechanical unlocking of the boot in the event of a battery or central locking malfunction. Unlocking Fold back the rear seats to gain access to the lock from inside the boot. Insert a small screwdriver into hole A of the lock to unlock the tailgate.
80 IV ACCESS B O O T After unlocking the vehicle com- pletely using the remote control or the key , with the rear screen closed, pull on the handle 1 and raise the tailgate. Lower the tailgate using one of the two handholds 3 , located on the interior boot trim.
81 IV ACCESS Emergency boot lid release System for mechanical unlocking of the boot in the event of a battery or central locking malfunction. Unlocking Fold back the rear seats to gain access to the lock from inside the boot. Insert a small screwdriver into hole A of the lock to unlock the tailgate.
82 IV ACCESS F U E L T A N K Capacity of the tank: approxi- mately 60 litres. Low fuel level When the minimum level in the tank is reached, this warning lamp on the instrument panel comes on, accompanied by an audible warning and a message on the multifunction screen.
83 IV ACCESS UNLEADED PETROL After switching off the ignition, the control A is active for only a few minutes. If necessary , switch on the ignition again to reactivate it. If you have put in fuel that is wrong for your vehicle, it is es- sential to have the tank drained before you start the engine.
84 VISIBILITY V LIGHTING CONTROLS System for selection and control of the various front and rear lamps pro- viding the vehicle's lighting. Main lighting The various front and rear lamps of the ve.
85 VISIBILITY V C. fog lamps selection ring. The fog lamps operate with the sidelamps and the dipped and main beam headlamps. - 1 st turn forwards: rear foglamp on. - 1 st turn rearwards: rear foglamp off. - 1 st turn forwards: front foglamps on. - 2 nd turn forwards: rear foglamps on.
86 VISIBILITY V * According to country . Daytime-running lamps * System which switches on the ve- hicle's dipped headlamps automati- cally on starting.
87 VISIBILITY V Linking with the automatic "Guide-me-home" lighting Association with the automatic light- ing provides the "guide-me-home" lighting with the following additional op.
88 VISIBILITY V AUTOMA TIC ADJUSTMENT OF THE DIRECTIONAL HEADLAMPS In order to avoid causing a nuisance to other road users, this system cor- rects the height of the xenon head- lamps beam automatically and when stationary , in relation to the load in the vehicle.
86 VISIBILITY V * According to country . Daytime-running lamps * System which switches on the ve- hicle's dipped headlamps automati- cally on starting.
87 VISIBILITY V Linking with the automatic "Guide-me-home" lighting Association with the automatic light- ing provides the "guide-me-home" lighting with the following additional op.
88 VISIBILITY V AUTOMA TIC ADJUSTMENT OF THE DIRECTIONAL HEADLAMPS In order to avoid causing a nuisance to other road users, this system cor- rects the height of the xenon head- lamps beam automatically and when stationary , in relation to the load in the vehicle.
87 VISIBILITY V Linking with the automatic "Guide-me-home" lighting Association with the automatic light- ing provides the "guide-me-home" lighting with the following additional op.
88 VISIBILITY V AUTOMA TIC ADJUSTMENT OF THE DIRECTIONAL HEADLAMPS In order to avoid causing a nuisance to other road users, this system cor- rects the height of the xenon head- lamps beam automatically and when stationary , in relation to the load in the vehicle.
89 VISIBILITY V WIPER CONTROLS System for selection and control of the various front and rear wiping modes for the elimination of rain and cleaning. The vehicle's front and rear wipers are designed to improve the driver's visibility progressively according to the climatic conditions.
90 VISIBILITY V Reverse gear When reverse gear is engaged, the rear wiper will come into operation if the windscreen wipers are operating. Programming The function is activat- ed or deactivated via the multifunction screen confi guration menu. This function is activat- ed by default.
91 VISIBILITY V Special position of the windscreen wipers In the minute following switching off of the ignition, any action on the stalk positions the wipers in the centre of the windscreen. This action enables you to position the wiper blades for winter parking, cleaning or replacement.
90 VISIBILITY V Reverse gear When reverse gear is engaged, the rear wiper will come into operation if the windscreen wipers are operating. Programming The function is activat- ed or deactivated via the multifunction screen confi guration menu. This function is activat- ed by default.
91 VISIBILITY V Special position of the windscreen wipers In the minute following switching off of the ignition, any action on the stalk positions the wipers in the centre of the windscreen. This action enables you to position the wiper blades for winter parking, cleaning or replacement.
92 VISIBILITY V AMBIANCE LIGHTING P ACK Ambiance lighting Y ou can adjust the lighting by pressing on the control A . This activates the light sources which are located as follows: - on the sides of the front and rear doors, - on the front and rear interior door handles, - on the dashboard, - at the roof.
93 VI FITTINGS SLIDING SUN VISOR Sliding blinds Visor rails The blinds are extended on the sun visor rails. Fold the visor downwards, to protect against dazzle to the face. If dazzle is coming from the side windows, detach the visor from its housing above the centre of the windscreen and pivot it to the side.
94 VI FITTINGS UPPER STORAGE AREA There are large storage compart- ments at the top of the fascia, one on the driver's side and one on the passenger's side. T o open, press the button at the bottom corner . T o close, lower the lid fully until it clicks.
95 VI FITTINGS REFRIGERA TED STORAGE CENTRE CONSOLE The centre console contains: - two cup-holders, - two storage compartments, - either a 12 V accessories socket (Maximum power: 120 W); this is operational when the ignition is on. There may be an additional 12 V accessories socket in the boot.
96 VI FITTINGS M A T S Removable component which pro- tects the carpet against exterior dirt. Fitting When fi tting the mat for the fi rst time, on the driver's side, use only the fi x- ings provided in the wallet attached. The other mats are simply placed on the carpet.
97 VI FITTINGS AIRCRAFT -STYLE REAR T ABLES Rear table stowed Rear table opened The backrests of the front seats are fi tted with aircraft-style tables. These incorporate a can-holder A and a retaining strap B , for the placing of objects. Pull the table downwards to open.
98 VI FITTINGS SIDE BLINDS (C4 PICASSO) Fitted on the 2nd row rear windows, these protect young children from the sun's rays. Pull on the tab A and anchor the blind on the hook B . REAR BLIND (C4 PICASSO) Pull on the tab of the blind located on the luggage cover and position the blind on the hooks.
93 VI FITTINGS SLIDING SUN VISOR Sliding blinds Visor rails The blinds are extended on the sun visor rails. Fold the visor downwards, to protect against dazzle to the face. If dazzle is coming from the side windows, detach the visor from its housing above the centre of the windscreen and pivot it to the side.
94 VI FITTINGS UPPER STORAGE AREA There are large storage compart- ments at the top of the fascia, one on the driver's side and one on the passenger's side. T o open, press the button at the bottom corner . T o close, lower the lid fully until it clicks.
95 VI FITTINGS REFRIGERA TED STORAGE CENTRE CONSOLE The centre console contains: - two cup-holders, - two storage compartments, - either a 12 V accessories socket (Maximum power: 120 W); this is operational when the ignition is on. There may be an additional 12 V accessories socket in the boot.
96 VI FITTINGS M A T S Removable component which pro- tects the carpet against exterior dirt. Fitting When fi tting the mat for the fi rst time, on the driver's side, use only the fi x- ings provided in the wallet attached. The other mats are simply placed on the carpet.
97 VI FITTINGS AIRCRAFT -STYLE REAR T ABLES Rear table stowed Rear table opened The backrests of the front seats are fi tted with aircraft-style tables. These incorporate a can-holder A and a retaining strap B , for the placing of objects. Pull the table downwards to open.
98 VI FITTINGS SIDE BLINDS (C4 PICASSO) Fitted on the 2nd row rear windows, these protect young children from the sun's rays. Pull on the tab A and anchor the blind on the hook B . REAR BLIND (C4 PICASSO) Pull on the tab of the blind located on the luggage cover and position the blind on the hooks.
99 VI FITTINGS LUGGAGE COVER (C4 PICASSO) This is in two parts. Rear shelf T o remove Unhook the cords. Push upwards, then lift on each side of the luggage cover . Front shelf T o remove First remove the rear shelf. Push upwards, then lift on each side.
100 VI FITTINGS MODUBOX (C4 PICASSO) Equipment for use both inside the vehicle and away from the vehicle. It is composed of a shopping trol- ley and a fl exible bag (isotherm on some versions) which can be used independently of each other depen- ding on your needs (by detaching the fastenings on each side at the top and bottom).
101 VI FITTINGS The roller has a moving fl ap to avoid interference with the second- row passengers when the seats are in the "reclined" position. Engage the lug on the left of the roller in notch C . Pass the right-hand side above the third-row armrest.
102 VI FITTINGS HIGH CARGO NET (GRAND C4 PICASSO) This enables you to maximise the vehicle’s loadspace. It retains objects, preventing them from sliding towards the front of the passenger compartment. Y ou insert it under the roller of the luggage-cover blind, securing it on the third-row side mouldings.
103 VI FITTINGS LUGGAGE RET AINING NET (C4 PICASSO) There are 8 anchoring rings in the boot to enable you to secure your luggage: - 1, 2, 3 and 4 on the boot fl oor , - 5, 6, 7 and 8 on the boot pillars.
104 VI FITTINGS T O R C H This is a removable light, incorpo- rated in the boot wall, which can be used to light the boot or as a torch. Grand C4 Picasso C4 Picasso Boot lighting The boot lamp A comes on automat- ically when the boot is opened and switches off automatically when the boot is closed.
99 VI FITTINGS LUGGAGE COVER (C4 PICASSO) This is in two parts. Rear shelf T o remove Unhook the cords. Push upwards, then lift on each side of the luggage cover . Front shelf T o remove First remove the rear shelf. Push upwards, then lift on each side.
100 VI FITTINGS MODUBOX (C4 PICASSO) Equipment for use both inside the vehicle and away from the vehicle. It is composed of a shopping trol- ley and a fl exible bag (isotherm on some versions) which can be used independently of each other depen- ding on your needs (by detaching the fastenings on each side at the top and bottom).
102 VI FITTINGS HIGH CARGO NET (GRAND C4 PICASSO) This enables you to maximise the vehicle’s loadspace. It retains objects, preventing them from sliding towards the front of the passenger compartment. Y ou insert it under the roller of the luggage-cover blind, securing it on the third-row side mouldings.
103 VI FITTINGS LUGGAGE RET AINING NET (C4 PICASSO) There are 8 anchoring rings in the boot to enable you to secure your luggage: - 1, 2, 3 and 4 on the boot fl oor , - 5, 6, 7 and 8 on the boot pillars.
104 VI FITTINGS T O R C H This is a removable light, incorpo- rated in the boot wall, which can be used to light the boot or as a torch. Grand C4 Picasso C4 Picasso Boot lighting The boot lamp A comes on automat- ically when the boot is opened and switches off automatically when the boot is closed.
105 VII CHILD SAFETY * The rules for transporting children are specifi c to each country . Refer to the current legislation in your country . GENERAL POINTS RELA TING TO CHILD SEA TS Although one of CITROËN's main criteria when designing your vehi- cle, the safety of your children also depends on you.
106 VII CHILD SAFETY Passenger air bag OFF CHILD SEA TS RECOMMENDED BY CITROËN CITROËN offers a complete range of recommended child seats which are secured using a three point seat belt : Group 0: f.
106 VII CHILD SAFETY Passenger air bag OFF CHILD SEA TS RECOMMENDED BY CITROËN CITROËN offers a complete range of recommended child seats which are secured using a three point seat belt : Group 0: f.
107 VII CHILD SAFETY * Applies only to the 7 seater model. LOCA TION OF CHILD SEA TS SECURED BY MEANS OF THE VEHICLE SEA T BEL T In conformity with European law , this table tells you to what extent e.
108 VII CHILD SAFETY * According to country and current local legislation. ADVICE ON CHILD SEA TS Installing a booster seat The chest part of the seat belt must be positioned on the child's shoul- der without touching the neck. Ensure that the lap part of the seat belt passes correctly over the child's thighs.
109 VII CHILD SAFETY "ISOFIX" MOUNTINGS Y our vehicle has been approved in accordance with the new ISOFIX regulation . The three second row seats are fi tted with regulation ISOFIX mountings.
1 10 VII CHILD SAFETY ISOFIX CHILD SEA T RECOMMENDED BY CITROËN AND APPROVED FOR YOUR VEHICLE This child seat can also be used on seats which are not fi tted with ISOFIX mountings. In this case, it must be attached to the vehicle seat using the three point seat belt.
111 VII CHILD SAFETY * The ISOFIX shell is secured to the bottom rings on an ISOFIX position, occupying 2 rear seat positions. ** T o install ISOFIX child seats type B1 , remove the head restraints from the seats.
1 12 VII CHILD SAFETY MANUAL CHILD LOCK Locking T urn the red control one eighth of a turn to the left using the igni- tion key . Unlocking T urn the red control one eighth of a turn to the right using the ignition key . ELECTRIC CHILD LOCK Mechanical system to prevent ope- ning of the rear door using its interior control.
1 13 VIII SAFETY DIRECTION INDICA TORS Lower the lighting stalk fully when moving to the left. Raise the lighting stalk fully when moving to the right. HAZARD W ARNING LAMPS A visual warning by means of the di- rection indicators to alert other road users to a vehicle breakdown, tow- ing or accident.
1 14 VIII SAFETY TYRE UNDER-INFLA TION DETECTION Sensors fi tted in each valve check the tyre pressure during driving and trigger a warning in the event of malfunction (speed above 12 mph (20 km/h). Flat tyre The tyre under-infl ation detection system is an aid to driving which does not replace the vigilance or responsibility of the driver .
1 15 VIII SAFETY BRAKING ASSIST ANCE SYSTEMS Group of supplementary systems which help you to obtain optimum braking in complete safety in emer- gency situations: - anti-lock braking system (ABS), - electronic brake force distribu- tion (EBFD), - emergency braking assistance (EBA).
1 16 VIII SAFETY TRAJECTOR Y CONTROL SYSTEMS Anti-skid regulation (ASR) and electronic stability programme (ESP) The anti-skid regulation (also known as Traction Control) optimises trac- tion to prevent skidding of the wheels, by acting on the brakes of the driving wheels and on the engine.
1 17 VIII SAFETY SEA T BEL TS Front seat belts The front seat belts are fi tted with a pretensioning system and force limiter . This system improves safety in the front seats in the event of a front impact. Depending on the seriousness of the impact, the pretensioning system in- stantly tightens the seat belt against the body of the occupant.
1 18 VIII SAFETY Rear central seat belt Installation of the seat belt (C4 Picasso) Open the cover A . Remove the belt tongues from their housing. Bring the belt tongues up to the relay ring B . Insert the attachment, then pass the tongues through the ring.
1 19 VIII SAFETY Third row rear seat belts (Grand C4 Picasso) Requirements for the third-row passenger seat belts T ake care to attach the third-row passenger seat belts securely on the rings provided for this purpose. Do not attach the belts on the an- choring points marked with a red cross, as shown on the illustration.
120 VIII SAFETY The driver must ensure that passen- gers use the seat belts correctly and that they are all restrained securely before setting off. Wherever you are seated in the ve- hicle, always fasten your seat belt, even for short journeys. Do not invert the seat belt buckles as they will not fulfi l their role fully .
121 VIII SAFETY AIR BAGS System designed to maximise the safety of the occupants (with the exception of the rear centre pas- senger) in the event of violent col- lisions.
122 VIII SAFETY Deactivation This warning lamp comes on in the instrument panel when the ignition is on and until the airbag is reactivated. T o guarantee the safety of your child, it is imperative that the pas- senger airbag is deactivated when you install a "rearwards-facing" child seat on the front passenger seat.
124 VIII SAFETY For the airbags to be fully effective, observe the following safety rules: Sit in a normal upright position. Wear a correctly adjusted seat belt. Do not leave anything between the occupants and the airbags (a child, pet, object...). This could hamper the operation of the airbags or injure the occupants.
123 VIII SAFETY * According to country . Side airbags * System which protects the driver and front passenger in the event of a serious side impact in order to limit the risk of injury to the chest. Each side airbag is incorporated in the front seat back frame, on the door side.
124 VIII SAFETY For the airbags to be fully effective, observe the following safety rules: Sit in a normal upright position. Wear a correctly adjusted seat belt. Do not leave anything between the occupants and the airbags (a child, pet, object...). This could hamper the operation of the airbags or injure the occupants.
125 IX DRIVING ELECTRIC P ARKING BRAKE The electric parking brake operates as follows - Automatic application/release Application is automatic when the engine stops, release is automatic on use of the accelerator .
126 IX DRIVING Automatic application, engine off With the vehicle stationary , the park- ing brake is automatically applied when the engine is switched off .
126 IX DRIVING Automatic application, engine off With the vehicle stationary , the park- ing brake is automatically applied when the engine is switched off .
127 IX DRIVING T o immobilise the vehicle, engine running With the engine running and the ve- hicle stationary , in order to immobi- lise the vehicle you need to manually apply the parking brake by pulling on control A .
128 IX DRIVING Dynamic emergency braking In the event of a failure of the ve- hicle’s main braking system or in an exceptional situation (e.g. driver taken ill, under instruction, etc) a continuous pull on control A will stop the vehicle. The electronic stability programme (ESP) provides stability during dy- namic emergency braking.
129 IX DRIVING Emergency unlocking In the event of the electric parking brake malfunctioning or the battery running fl at, an emergency mecha- nism can unlock the parking brake. Immobilise the vehicle, with the engine running, by engaging fi rst gear (manual gearbox), posi- tion P (automatic gearbox) or M or R (6-speed electronic gear- box).
130 IX DRIVING SITUA TION CONSEQUENCES 1 Electric parking brake fault and display of message " Parking brake faulty " and the following warning lamps: If the electric parking brake fault warning lamp and the service warning lamp light up, position the vehicle in a safe location (on fl at ground, with a gear engaged).
131 IX DRIVING SITUA TION CONSEQUENCES 4 Display of message " Parking brake faulty " and the following warning lamps: and/or fl ashing - The automatic functions are deactivated.
132 IX DRIVING HILL ST ART ASSIST System which keeps your vehicle immobilised temporarily (approxi- mately 2 seconds) when starting on a gradient, the time it takes to move your foot from the brake pedal to the accelerator pedal.
133 IX DRIVING 5-SPEED MANUAL GEARBOX Starting the vehicle Check that the gear lever is in neutral. Do not touch the accelerator . For Diesel engines: turn the key to position M and wait until the pre-heating warning lamp switches off if it has come on.
134 IX DRIVING Displays on the instrument panel - The selector position is displayed in the instrument panel, on the left on multifunction screens A and C and on the right on the NaviDrive multifunction screen. - A background-lit position grille associated with the selector al- lows you to view the position se- lected.
135 IX DRIVING Automatic mode Changing to automatic mode T o change to automatic mode, move the selector to A . Manual mode Changing to manual mode Manual mode activates when you move the selector to M . Pull the paddle " + " to change up a gear .
136 IX DRIVING Operation in manual mode Move the selector to po- sition M . Controls behind the steering wheel The paddles behind the steering wheel give you access to the six for- ward gears. Changing gear Pull the " + " paddle to change up a gear .
137 IX DRIVING Acceleration For optimum acceleration (e.g. to overtake another vehicle), simply press the pedal beyond the point of resistance at the end of its travel, by pressing down fi rmly . V ehicle stationary , with the engine running In the event of a prolonged stop with the engine running, the gearbox changes automatically to neutral N .
133 IX DRIVING 5-SPEED MANUAL GEARBOX Starting the vehicle Check that the gear lever is in neutral. Do not touch the accelerator . For Diesel engines: turn the key to position M and wait until the pre-heating warning lamp switches off if it has come on.
138 IX DRIVING AUTOMA TIC GEARBOX Automatic gearbox which offers a choice between the ease of fully automatic operation or the driving pleasure of manual gear changing.
139 IX DRIVING T o start the engine, press the brake pedal and place the selec- tor in position P . Operate the starter . When the engine is running, place the selector on R , D or M as required. Check, in the instrument panel, the position engaged.
140 IX DRIVING Automatic operation Move the selector to po- sition D . The gearbox is then operating in auto-adaptive mode, without requir- ing any intervention on your part.
141 IX DRIVING Manual operation Position of the selector for manual gear changing. Move the selector to po- sition M . Pull the lever " + " to change up a gear .
142 IX DRIVING FIXED CENTRED CONTROLS STEERING WHEEL Cruise control/speed limiter and parking space function controls 1. Selection of parking space function. 2. Selection of cruise control or speed limiter . 3. Activation/Deactivation of speed limiter .
143 IX DRIVING Optional function controls 1. Pick up/Hang up the tele- phone (see chapter "Audio and T elematics"). 2. Rheostat for dashboard lighting.
144 IX DRIVING SPEED LIMITER System which prevents the vehi- cle from exceeding the speed pro- grammed by the driver . Once the limit speed has been reached, the accelerator pedal no longer has any effect. The speed limiter is switched on manually: a speed of at least 30 km/h (around 20 mph) must be programmed.
145 IX DRIVING Deactivation Press on button 3 . This action causes the information "OFF" to appear on the instru- ment panel display . This action does not cancel the memorised maximum speed which remains displayed in zone A of the instrument panel.
146 IX DRIVING CRUISE CONTROL System which automatically main- tains the vehicle speed programmed by the driver , without any action on the accelerator pedal. The cruise control is switched on manually: the vehicle speed must be at least 25 mph (approx.
147 IX DRIVING Reactivation By recall of the memorised speed After a disengagement, press on button 3 . Y our vehicle automati- cally returns to the memorised cruise speed which is displayed in zone A . If the memorised cruise speed is higher than the current speed, the vehicle will accelerate to reach the former .
148 IX DRIVING P ARKING SP ACE SENSOR System which measures the parking space available between two vehi- cles or obstacles. It measures the size of the space and gives you in- formation on: - the pos.
149 IX DRIVING Operation Y ou have identifi ed a parking space: Press button A to select the func- tion. Activate the direction indicator on the side where the space is to be measured. During the measuring, go for- ward the length of the space, at a speed less than 12 mph (ap- prox.
150 IX DRIVING LANE DEP ARTURE W ARNING SYSTEM System which detects the involun- tary crossing of longitudinal traffi c lane markings on the ground (solid or broken line). Sensors, fi tted below the front bumper , trigger a warning if the vehi- cle drifts over a lane marking (speed higher than 50 mph (80 km/h)).
151 IX DRIVING VISUAL AND AUDIBLE FRONT AND/OR REAR P ARKING ASSIST ANCE System consisting of four proximity sensors, installed in the front and/or rear bumper . It detects any obstacle (person, ve- hicle, tree, barrier ...) located behind the vehicle, however , it will not be able to detect obstacles located im- mediately below the bumper .
152 IX DRIVING In bad weather or in winter , ensure that the sensors are not covered with mud, ice or snow . When re- verse gear is engaged, an audible signal (long beep) indicates that the sensors may be dirty .
153 IX DRIVING PNEUMA TIC SUSPENSION Grand C4 Picasso C4 Picasso The rear pneumatic suspension en- hances driving comfort by maintain- ing a constant body height whatever the vehicle load.
154 IX DRIVING Loading/unloading assistance Grand C4 Picasso C4 Picasso The pneumatic suspension has an ad- ditional function associated with it: the possibility to raise or lower the height of the rear of the vehicle when stationary , in order to facilitate loading/unloading of the boot.
156 X CHECKS B O N N E T Protects the components of the engine and provides access for checking levels. Opening Push the exterior control B to the left and raise the bonnet. Unclip the strut C from its housing. Fix the strut in the notch to hold the bonnet open.
157 X CHECKS BLEEDING THE DIESEL FIL TER Protective cover Removal Remove the protective cover by unclipping fi rst point 1 , then 3 and 4 . Unclip point 2 pulling towards you, then lift. Refi tting Clip point 2 fi rst. Lower the cover , centring it.
158 X CHECKS RUNNING OUT OF FUEL (DIESEL) HDi 138 engine Detach the protective cover for ac- cess to the priming pump. HDi 1 10 engine Detach the protective cover for ac- cess to the priming pump.
159 X CHECKS PETROL ENGINES The covers and caps allow you access for checking the level of the various fl uids and for replacing certain components. 1. Screenwash and headlamp wash reservoir . 2. Coolant header tank. 3. Brake fl uid reservoir . 4. Battery/Fuses.
160 X CHECKS * According to engine. DIESEL ENGINES The covers and caps allow you access for checking the level of the various fl uids, for replacing certain components and for repriming the fuel. 1. Screenwash and headlamp wash reservoir . 2. Coolant header tank 3.
161 X CHECKS C H E C K I N G L E V E L S Check all of these levels regularly and top them up if necessary , unless otherwise indicated. If a level drops signifi cantly , have the corresponding system checked by a CITROËN dealer . Oil level Oil change Refer to the Maintenance and W arranty Guide for details of the in- terval for this operation.
162 X CHECKS Screenwash and headlamp wash fluid Fluid specifi cation For optimum cleaning and to avoid freezing, this fl uid must not be topped up or replaced with plain water . Reservoir capacities: - screenwash: approximately 3 litres, - screenwash and headlamp wash: approximately 6 litres.
163 X CHECKS C H E C K S Unless otherwise indicated, check these components in accordance with the Maintenance and Warranty Guide and according to your en- gine. Otherwise, have them checked by a CITROËN dealer . Battery The battery does not re- quire any maintenance.
164 X CHECKS Brake pads Brake wear depends on the style of driving, par- ticularly in the case of ve- hicles used in town, over short distances. It may be necessary to have the condition of the brakes checked, even between vehicle services.
165 XI PRACTICAL INFORMA TION PUNCTURE REP AIR KIT Using the kit The kit is located in the boot under the fl oor or under the fl ap in the sec- ond row left-hand passenger foot- well (open by turning the screw a quarter of a turn).
166 XI PRACTICAL INFORMA TION Remove the compressor and store the bottle in the plastic bag, supplied in the kit, to avoid stain- ing your vehicle with traces of fl uid. Drive immediately for approxi- mately two miles (three kilome- tres), at reduced speed (between 15 and 35 mph [20 and 60 km/h]), to plug the puncture.
167 XI PRACTICAL INFORMA TION Connect the compressor's elec- tric plug to the vehicle's 12 V socket again. Start the vehicle again and leave the engine running.
168 XI PRACTICAL INFORMA TION C H A N G I N G A W H E E L Access to the tools Depending on equipment, the tools are to be found either in the com- partment under the second-row pas- senger footwells (the compartment is opened by turning the screw a quarter turn) or in the well under the third-row left-hand seat.
169 XI PRACTICAL INFORMA TION Grand C4 Picasso C4 Picasso Access to the spare wheel T aking out the wheel Move the third-row seat, right- hand side (7 seater model). Retrieve the extension that is attached to the rear of the seat well. Engage the extension on the pinion, located under the carpet in the seat well.
170 XI PRACTICAL INFORMA TION Removing a wheel Park the vehicle on level, stable and non-slippery ground. Apply the parking brake (a message and a warning lamp appear on the instrument panel).
171 XI PRACTICAL INFORMA TION Wheel for temporary use If your vehicle is equipped with a spare wheel for temporary use only , when fi tting this it is normal to observe that the wheel bolts do not come to bear directly on the wheel rim. The spare wheel is secured by the conical tapering of the wheel bolt’ s shaft.
171 XI PRACTICAL INFORMA TION Wheel for temporary use If your vehicle is equipped with a spare wheel for temporary use only , when fi tting this it is normal to observe that the wheel bolts do not come to bear directly on the wheel rim. The spare wheel is secured by the conical tapering of the wheel bolt’ s shaft.
172 XI PRACTICAL INFORMA TION C H A N G I N G A B U L B Procedure for replacing a faulty bulb with a new bulb without the use of any tools. Headlamps Model with halogen headlamps 1. Dipped beams (H7-55 W) 2. Main beams (H1-55 W) 3. Sidelamps (H6 W -6 W) 4.
173 XI PRACTICAL INFORMA TION Main beam headlamps Sidelamps Remove the rubber cover . Detach the clips by lowering them on each side of the bulb. Pull on the bulb-holder to remove it. Replace the faulty bulb. Push the bulb-holder back into its housing.
174 XI PRACTICAL INFORMA TION Integrated direction indicator side repeaters T o change the repeater , press down- wards fi rmly on the zone indicated by the arrow , then pull the repeater . Repeaters can be obtained from a CITROËN dealer . Model with Xenon headlamps and directional headlamps 1.
175 XI PRACTICAL INFORMA TION Front foglamps (H1 1-55 W) Insert the key in the notch A , tilt- ing the bulb-holder cover , locat- ed underneath the bumper , then insert the key in the notch B to remove it. Undo the lamp. T ilt the bulb-holder .
176 XI PRACTICAL INFORMA TION Rear lamps (C4 Picasso) 1. Direction indicators (PY21 W) 2. Stoplamps/sidelamps (P21/5 W) 3. Reversing lamp (P21 W ) Identify the bulb that is faulty . With the boot open, press on the plastic cover A , located close to the lens, to release it from its housing.
177 XI PRACTICAL INFORMA TION Rear lamps (Grand C4 Picasso) 1. Direction indicators (PY21 W) 2. Stoplamps (P21 W) 3. Reversing lamp (P21 W) 4. Sidelamps (diodes) For this type of lamp, contact a CITROËN dealer . Changing lamps Identify the bulb that is faulty .
178 XI PRACTICAL INFORMA TION Third brake lamp with bulb (W 5 W) With the boot open, detach the interior trim. Undo the nuts. Using a thin screwdriver , detach the 3 retaining lugs. Remove the lamp via the exte- rior of the tailgate. Remove the bulb-holder .
178 XI PRACTICAL INFORMA TION Third brake lamp with bulb (W 5 W) With the boot open, detach the interior trim. Undo the nuts. Using a thin screwdriver , detach the 3 retaining lugs. Remove the lamp via the exte- rior of the tailgate. Remove the bulb-holder .
179 XI PRACTICAL INFORMA TION C H A N G I N G A F U S E Operating procedure for replacing a faulty fuse with a new fuse to rectify a failure of the corresponding function. There are two fuseboxes under the dashboard, one fusebox in the en- gine compartment and another on the battery .
180 XI PRACTICAL INFORMA TION Fuses under the dashboard Access to the fuses Undo the screw by a quarter turn and pivot the housing. T able of fuses Fuse N° Rating Functions F1 15 A Rear screen wi.
181 XI PRACTICAL INFORMA TION Access to the second dashboard fusebox After any operation on the fuses in the fusebox, check that the fusebox cover is put back cor- rectly for their protection.
179 XI PRACTICAL INFORMA TION C H A N G I N G A F U S E Operating procedure for replacing a faulty fuse with a new fuse to rectify a failure of the corresponding function. There are two fuseboxes under the dashboard, one fusebox in the en- gine compartment and another on the battery .
182 XI PRACTICAL INFORMA TION Fuses in the engine compartment Access to the fuses Detach and remove the cover . After any operation, carefully refi t the cover . If the cover is not cor- rectly positioned or not properly closed, this could cause serious problems on your vehicle.
183 XI PRACTICAL INFORMA TION T able of fuses Fuse N° Rating Functions F1 20 A Engine management F2 15 A Horn F3 10 A Screen wash pump F4 20 A Headlamp wash pump F5 15 A Engine components F6 10 A Xen.
184 XI PRACTICAL INFORMA TION Fuses on the battery After any operation, carefully refi t the cover . If the cover is not cor- rectly positioned or not properly closed, this could cause serious problems on your vehicle. For the same reason, take care not to spill any liquid in the fusebox.
185 XI PRACTICAL INFORMA TION B A T T E R Y Procedure for charging your battery when it is fl at or for starting the en- gine using another battery . Access to the battery The battery is located under the bonnet.
186 XI PRACTICAL INFORMA TION The batteries contain harm- ful substances such as sul- phuric acid and lead. They must be disposed of in accordance with regulations and must not, in any circumstances, be discarded with household waste. T ake used remote control batteries and vehicle batteries to a special collection point.
186 XI PRACTICAL INFORMA TION The batteries contain harm- ful substances such as sul- phuric acid and lead. They must be disposed of in accordance with regulations and must not, in any circumstances, be discarded with household waste. T ake used remote control batteries and vehicle batteries to a special collection point.
187 XI PRACTICAL INFORMA TION TOWING THE VEHICLE Procedure for having your vehicle towed or for towing another vehicle using a removable towing eye. Access to the tools According to equipment, the towing eye is installed in the storage fl ap under the second row passenger footwell or under the boot fl oor .
188 XI PRACTICAL INFORMA TION TOWING A TRAILER, A CARA V AN, ETC. T owbar suited to the attachment of a trailer or caravan with additional sig- nalling and lighting. Y our vehicle is primarily designed for transporting people and luggage, but it may also be used for towing a trailer .
189 XI PRACTICAL INFORMA TION ROOF BARS The design of your vehicle, for your safety and to avoid damage to the roof and tailgate, requires the use of roof bars and roof boxes that are tested and approved by CITROËN. Regardless of the type of loading equipment to be transported on the roof (roof box, bicycle carrier , ski carrier .
190 XI PRACTICAL INFORMA TION * T o avoid any risk of jamming of the pedals: - ensure that the mat is positioned and secured correctly , - never fi t one mat on top of another .
191 XII TECHNICAL DA T A MODELS: ENGINES AND GEARBOXES Model codes: UA... UE... UD... 5FW-C 5FX-H/P 5FT -F RFJ-F PETROL ENGINES 1.6 L VTi 16V 120 hp 1.6 L THP 16V 150 hp 1.6 L THP 16V 140 hp 2 L 16V 143 hp Cubic capacity (cm 3 ) 1 598 1 598 1 997 Bore x stroke (mm) 77 x 85.
192 XII TECHNICAL DA T A FUEL CONSUMPTION Grand C4 Picasso and C4 Picasso In accordance with directive 80/1268/CEE Petrol engines Gearboxes Model codes: UA... UE... UD... Urban litres/100 km ( mpg ) Extra -urban litres/100 km ( mpg ) Mixed litres/100 km ( mpg ) CO 2 Emissions (g/km) 1.
193 XII TECHNICAL DA T A * The weight of the braked trailer can be increased, within the GTW limit, on condition that the GVW of the towing vehicle is reduced by the same amount; warning, towing with a lightly loaded towing vehicle may have an adverse effect on its road holding.
194 XII TECHNICAL DA T A The GTW and towed load values indicated apply up to a maximum altitude of 1 000 metres; the towed load mentioned must be reduced by 10 % for each additional 1 000 metres of altitude. The speed of a towing vehicle must not exceed 100 km/h (approx.
195 XII TECHNICAL DA T A MODELS: ENGINES AND GEARBOXES Model codes: UA... UE... UD... 9HZ-C 9HZ-H/P RHR-H RHJ-H/P RHR-J DIESEL ENGINES 1.6 L HDi 1 10 hp 2 L HDi 138 hp Cubic capacity (cm 3 ) 1 560 1 997 Bore x stroke (mm) 75 x 88.
196 XII TECHNICAL DA T A FUEL CONSUMPTION Grand C4 Picasso and C4 Picasso In accordance with directive 80/1268/CEE Diesel engines Gearboxes Model codes: UA... UE... UD... Urban litres/100 km ( mpg ) Extra -urban litres/100 km ( mpg ) Mixed litres/100 km ( mpg ) CO 2 emissions (g/km) 1.
197 XII TECHNICAL DA T A WEIGHTS AND TOWED LOADS (in kg) Diesel engines 1.6 L HDi 1 10 hp Gearboxes Manual Electronic gearbox system Model codes: UA...
198 XII TECHNICAL DA T A The GTW and towed load values indicated apply up to a maximum altitude of 1 000 metres; the towed load mentioned must be reduced by 10 % for each additional 1 000 metres of altitude. The speed of a towing vehicle must not exceed 100 km/h (approx.
199 XII TECHNICAL DA T A * Depending on suspensions and roof bars. DIMENSIONS (IN METRES) Exterior (Grand C4 Picasso and C4 Picasso) Grand C4 Picasso C4 Picasso A 2 . 7 3 0 2.730 B 4 . 5 9 0 4.470 C 0 . 9 9 0 0.990 D 0 . 8 7 0 0.750 E 1 . 5 1 0 1.510 F 1 .
200 XII TECHNICAL DA T A A 0 . 9 3 0 B 0.960/0.980 C 0.880/1.000 D 1.610/1.870 E 0 . 9 3 0 F 1 . 1 4 0 G 1 . 1 2 0 H 1 . 1 7 0 Interior (C4 Picasso) Copyright Copyright Copyright CITROEN - Compiled by by by C4owners.org C4owners.org C4owners.org C4owners.
201 XII TECHNICAL DA T A Interior (Grand C4 Picasso) E 0 . 8 8 0 F 1 . 0 7 0 G 1 . 1 6 0 H 1 . 1 7 0 A 0 . 9 2 0 B 0.990/1.000 C 1.030/1.160 D 1.800/2.060 Copyright Copyright Copyright CITROEN - Compiled by by by C4owners.org C4owners.org C4owners.org C4owners.
202 XII TECHNICAL DA T A IDENTIFICA TION MARKINGS V arious visible markings for identifi - cation of the vehicle. The vehicle type and the identifi ca- tion number are also indicated on the registration document. All CITROËN original replacement parts are available exclusively within the dealer network.
277 Audio system CONTENTS • 01 First steps p. 278 • 02 General menu p . 279 • 03 Audio p . 280 • 04 USB reader p . 283 • 05 Bluetooth functions p . 286 • 06 Control short-cuts p . 288 • 07 Confi guration p . 289 • 08 Screen menu map p .
278 1 1 2 2 10 10 11 11 13 13 14 14 15 15 3 3 4 4 5 5 6 6 7 7 8 8 9 9 12 12 01 FIRST STEPS 1 . On/Off and volume adjustment. 2 . CD eject. 3 . Selection of the display on the screen from the modes: Audio (AUDIO), T rip Computer (TRIP) and Hands-Free Kit (TEL) functions.
279 02 GENERAL MENU AUDIO FUNCTIONS: radio, CD, USB, options. TRIP COMPUTER: entering distance, warnings, status of functions. TELEPHONE: Bluetooth, pairing, call management and transmission of .mp3 fi les. PERSONALISA TION-CONFIGURA TION: vehicle parameters, display , languages.
280 1 1 2 2 3 3 4 4 2 2 4 4 3 3 1 1 03 AUDIO Press the SOURCE button several times in succession and select the radio. Press the BAND AST button to select a waveband: FM1, FM2, FMast, AM. Briefl y press one of the buttons to carry out an automatic search of the radio stations.
281 1 1 2 2 1 1 2 2 Insert circular compact discs only . Some ant i-p irat ing syst ems, on orig inal dis cs o r C Ds copi ed u sin g a pers onal rec orde r , may cau se f aul ts which are no refl ection on the quality of the original player . Without pressing the EJECT button, insert a CD in the player , play begins automatically .
282 03 The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer 3, is an audio compression standard which permits the recording of several tens of music fi les on a single disc. In order to be able to play a recorded CDR or CDR W , when recording it is preferable to select standards ISO 9660 level 1.
283 1 1 04 1 1 2 2 3 3 USB Player The system puts together playlists (temporary memory) created over a period which depends on the capacity of the USB equipment. The other sources are available during this time. The playlists are updated each time the ignition is switched off or each time a USB stick is connected.
284 3 3 04 4 4 1 1 5 5 2 2 USB Player USING THE USB SOCKET Press LIST briefl y to display the list of Folders/Genres/Artists/Playlists on the USB equipment. Navigate through the list using the left/right and up/down buttons. Confi rm the selection by pressing OK.
285 1 1 2 2 2 2 1 1 The controls are displayed and managed via the portable equipment. First adjust the volume of your portable equipment. Then adjust the volume of your audio equipment. The auxiliary input, JACK and RCA, permits the connection of portable equipment (MP3 player .
286 1 1 6 6 2 2 7 7 4 4 9 9 5 5 10 10 3 3 8 8 05 Saisir code authentication 0 1 OK Del 2 3 4 5 6 7 8 9 _ BLUET OOTH FUNCTIONS For reasons of safety and because they require prolonged attention on t.
287 1 1 2 2 1 1 1 1 2 2 3 3 2 2 YES RECEIVING A CALL An i ncom ing cal l is ann ounc ed b y a ring and a s upe rimp osed dis play on the multifunction screen. Initiate the pairing between the telephone and the vehicle. This pairing can be initiated from the vehicle's telephone function menu or via the telephone's keypad.
288 06 4 1 2 3 5 1 2 3 4 5 2 1 CONTROL SHORT -CUTS STEERING WHEEL CONTROLS 1 . V olume increase. 2. V olume decrease. 3 . Mute. 4. RADIO: selection of the previous or next stored station. CD/MP3/USB: selection of the previous or next directory . CD CHANGER: selection of the previous or next CD.
289 5 5 6 6 7 7 8 8 1 1 2 2 3 3 4 4 07 CONFIGURA TION Press the MENU button. Using the arrows, select the PERSONALISA TION CONFIGURA TION function. Press to confi rm the selection. Using the arrows, select the DISPLA Y CONFIGURA TION function. Press to confi rm the selection.
290 1 2 2 2 2 1 2 2 1 2 3 3 1 2 2 2 2 2 2 1 2 2 2 2 2 2 2 2 1 2 2 1 2 3 2 3 08 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 RADIO-CD DISPLA Y ADJUST YEAR MONTH D A Y HOUR MINUTES 12 H/24 H MODE SCREEN MENU MAP MAIN FUNCTION * The parameters vary according to vehicle.
291 1 1 2 3 4 3 4 3 4 2 3 4 3 4 2 3 4 2 4 4 3 3 4 4 1 2 2 1 2 3 3 08 2 2 3 4 4 1 2 2 2 2 3 1 2 1 2 PERSONALISA TION-CONFIGURA TION AUDIO FUNCTIONS SCREEN MENU MAP monochrome C * The parameters vary according to vehicle.
290 1 2 2 2 2 1 2 2 1 2 3 3 1 2 2 2 2 2 2 1 2 2 2 2 2 2 2 2 1 2 2 1 2 3 2 3 08 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 RADIO-CD DISPLA Y ADJUST YEAR MONTH D A Y HOUR MINUTES 12 H/24 H MODE SCREEN MENU MAP MAIN FUNCTION * The parameters vary according to vehicle.
292 The table below groups together the answers to the most frequently asked questions concerning your Audio system. QUESTION SOLUTION ANSWER There is a difference in sound quality between the different audio sources (radio, CD, CD changer .
293 QUESTION SOLUTION ANSWER The stored stations do not function (no sound, 87.5 Mhz is displayed...). An incorrect waveband is selected. Press the BAND AST button to return to the waveband (AM, FM1, FM2, FMAST) on which the stations are stored. The traffi c announcement (T A) is displayed.
An important point after buying a device Citroën Grand C4 Picasso (2013) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Citroën Grand C4 Picasso (2013) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Citroën Grand C4 Picasso (2013) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Citroën Grand C4 Picasso (2013) you will learn all the available features of the product, as well as information on its operation. The information that you get Citroën Grand C4 Picasso (2013) will certainly help you make a decision on the purchase.
If you already are a holder of Citroën Grand C4 Picasso (2013), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Citroën Grand C4 Picasso (2013).
However, one of the most important roles played by the user manual is to help in solving problems with Citroën Grand C4 Picasso (2013). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Citroën Grand C4 Picasso (2013) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
