Instruction/ maintenance manual of the product V110 Cisco Systems
Go to page of 10
Basic V110 for MICA Mode ms on Cisco Access Servers 1 Basic V110 f or MICA Modems on Cisco Access Ser v ers Feature Overview This feature allows V.110 calls to be originated and terminated over ISDN.
2 Cisco IOS Release 12.0(4)XI1 Note This feature is distinct fro m the Asynchronous Manag emen t Protocol for V .110 T e rm inal Adaptor Module that runs in the Cisco AS5200 and Cisco AS5300. Benefits V .110 is a digital link access protocol and for Ci sco access servers.
Related Features and Te chnologies Basic V110 for MICA Mode ms on Cisco Access Servers 3 — 64k bps Related Features and T ec hnologies This feature requires special modem code to be do wnloaded to the MICA Modems. See the onli ne CCO modem information page.
4 Cisco IOS Release 12.0(4)XI1 List of T erms and Acr on yms Configuration T asks There are no configuration tasks. All comman ds in this feature are modif ied e xisting show modem commands. Command Reference This section documents modif ied commands.
show Command Examples Basic V110 for MICA Mode ms on Cisco Access Servers 5 http://www .cisco. com/univ ercd/cc/ td/doc/pr odu ct/software/ios120/12cgcr/dial_r/drprt1/dr modmgt.htm#xtocid10451223 See also show modem at: http://www .cisco.co m/univ ercd/cc/td/doc/p roduct/softwar e/ios113ed/113a a/113aa_2/58cfe ats/c5800uas.
6 Cisco IOS Release 12.0(4)XI1 Last clearing of "show modem" counters never 23 incoming completes, 2 incoming failures 0 outgoing completes, 0 outgoing failures 0 failed dial attempts, 0 rin.
show Command Examples Basic V110 for MICA Mode ms on Cisco Access Servers 7 Reason (=0 ): no disconnect has yet occurred Parameter #1 Connect Protocol: ISDN Mode Parameter #2 Compression: None Paramet.
8 Cisco IOS Release 12.0(4)XI1 State: Steady 4d06h :RS232 event: RTS, DTR, CTS, DCD 4d06h :Static event: Connect Protocol: ISDN Mode Compression: None Connected Standard: V.
ATDI Command (place V.110 call) Basic V110 for MICA Mode ms on Cisco Access Servers 9 Compression: None Connected Standard: V.110 TX,RX Symbol Rate: 0, 0 TX,RX Carrier Frequency: 0, 0 TX,RX Trellis Co.
10 Cisco IOS Release 12.0(4)XI1 By specifying a v alue 8 in S29 , the user causes the remote modem to i mplicitly assume that a V .110 connection is to b e established.
An important point after buying a device Cisco Systems V110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems V110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems V110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems V110 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems V110 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems V110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems V110.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems V110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems V110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
