Instruction/ maintenance manual of the product UCSRAID9266CV Cisco Systems
Go to page of 124
Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco U CS C220 S erver Ins.
THE SPECIFICATION S AND INFORMAT ION RE GARDIN G TH E PRODU CTS IN THIS MANU AL A RE SUBJ ECT T O CHAN GE W ITHOUT N OTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDA TIONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.
iii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 CONTENTS Preface vii Related Documentation vii Organization vii Audience viii Documentation Feedback viii Conventi ons viii Obtain.
Contents iv Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 CHAPTER 3 Maintaining the Server 3-1 Server Monitoring and Ma nagement Tools 3-1 Cisco Integrated Manageme nt Interface (C.
Contents v Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Cisco Flexible Flash Card Repla cement Procedure 3-40 Replacing the LSI RAID Battery Backup Unit or SuperCap Power Module 3.
Contents vi Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 RAID Controller Cabling C-19 Cable Routing C-19 Cisco UCS C220 Server Cablin g C-20 Backplane and Expander Options C-20 SF.
vii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface This preface describes the audi ence, organi zation, and conventions o f the Cisco UCS C220 Server Installation an d Servi ce Guid e . It also pr ovi des informatio n about h ow t o obtain r elated documen tation.
viii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface Audience This guide is for experien ced network administra tors who configu re and maintain Cisco servers. Documentation Feedback T o provi de technical feedback on thi s document, or to report an er ror or omission, please send your comments to ucs-docfeedback@external.
ix Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface V a roitus TÄRKEITÄ TURVALLISUUSOHJEIT A Tämä varoitusmerkki merkitsee vaaraa.
x Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo.
xi Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo.
xii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface.
xiii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface Obtaining Documentation and Submitting a Service Request For information on obtai ning documentation, submi tting a servi.
xiv Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface.
CH A P T E R 1-1 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 1 Overview This chapter provi des an overview of the Cisco U CS C220 server features. External Features Overview , page 1-1 Summary of Server Feat ures, page 1-3 External Features Overview The figures in this chapter show an overview of external server features.
1-2 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 1 Overvi ew Figure 1-1 shows the front pa nel features of the SFF driv es version of the server . Figur e 1 -1 Cisco UCS C220 Server (Small For m Fa ctor Dr ives) Fr ont Pa nel Featur es Figure 1-2 shows the front panel features of t he LFF drives version of the server .
1-3 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 1 Overview Figure 1-3 shows the rear panel features of the server (identical for bot h versions of the server). Figur e 1 -3 Rear P anel Featur es Summary of Server Features Ta b l e 1-1 lists the features of the server .
1-4 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 1 Overvi ew Power Up to two power supp lies, both either 450W or 650W each. Redundant as 1+1. Do not mix power supply types in the serv er . See Power Specifications, page A-3 for more information on p ower supplies.
CH A P T E R 2-1 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 2 Installing the Server This chapter d escribes ho w to instal l the server, and it includes the fo llowing se ctions:.
2-2 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Unpacking and Inspecting the Server Unpacking and Inspecting the Server Caution When handling internal server co mponents, wear an ESD strap and handl e modules by the carr ier edges only .
2-3 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Preparing for Serv er Installation Preparing for Server Installation This section prov ides informa.
2-4 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Preparing for Server Installation • Ensure that the air -conditioning meet s the thermal requirements listed in the Server Specifications .
2-5 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Installing the Server In a Rack Installing the Server In a Rack This section describes how to install the server in a rack.
2-6 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Installing the Server In a Rack Step 2 Install the slide rails onto the rack: a. Position a slide-rail assembly inside the tw o left-side rack posts (see Figure 2-3 ).
2-7 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Installing the Server In a Rack b. Push the serv er into the slide rails unti l it stops at the internal stops.
2-8 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Initial Server Setup Initial Server Setup This section includes the following topics: • Connecti.
2-9 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Initial Server Setup Step 3 Set NIC mode, NIC redund ancy , and choose whether to enabl e DHCP or set static network settings: a. Press the Pow e r button to boot the server .
2-10 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Initial Server Setup Step 4 Connect to the CIMC for server management. Connect Ethernet cables from your LAN to the serv er, using the ports that you selected b y your NIC Mode setting in Step 3 .
2-11 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Initial Server Setup NIC Modes and NIC Redundancy Settings This server h as the follo w ing NIC mode set tings that you can choose from: • Shared LOM EXT (default)—This is shared LOM extended mode.
2-12 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server System BIOS and CIMC Firmware System BIOS and CIMC Firmware This section includes inf ormation ab.
2-13 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server System BIOS and CI MC Firmware Accessing the System BIOS T o change the BIOS settings for your server , foll ow these steps. Detailed instructions ar e also printed on the BIOS screens.
2-14 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service Headers a nd Jumpers Service Headers and Jumpers This section includes the following topi.
2-15 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service He aders and Jump ers Using the BIOS Recovery Header J41 Depending on which stage t he BIOS becomes corrupted, you might see dif ferent behavior .
2-16 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service Headers a nd Jumpers Procedure 2: Use Recovery Jumper and recovery.cap File See Figure 2-5 for the location of the J41 header . Step 1 Download the BIOS update package an d extract it to a temp orary locati on.
2-17 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service He aders and Jump ers Using the Clear CMOS Header J37 See Figure 2-5 for the location of t his header . Y ou can jump er this header to clear the server’ s CMOS settings in the case of a system hang.
2-18 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service Headers a nd Jumpers.
CH A P T E R 3-1 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 3 Maintaining the Server This chapter describes how to diagnose server system problems using LEDs.
3-2 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Status LEDs an d Buttons Status LEDs and Buttons This section describes the location and meanin.
3-3 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Status LEDs and Button s System status • Green—The server is running in normal operating condition. • Green, blinking—The server is performi ng system initialization and memory check.
3-4 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Status LEDs an d Buttons Rear Panel LEDs and Buttons Figure 3-2 shows the rear panel LEDs and but tons.
3-5 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Status LEDs and Button s 1-Gb Ethernet link speed • Off—link speed is 10 Mbps. • Amber—link speed is 100 M bps. • Green—lin k speed is 1 Gbps.
3-6 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Status LEDs an d Buttons Internal Diagnostic LEDs The server has internal fault LEDs for fan modules and DIMMs. An LED lig hts amber to indi cate a failed component.
3-7 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Preparing for Server Compone nt Installation Preparing for Server Component Installation This sect.
3-8 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Preparing for Server Co mponent Installation Removing and Replacing the Server Top Cover T o re.
3-9 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Preparing for Server Compone nt Installation Replaceable Component Locations This section shows the lo cations of the componen ts that are discussed in this ch apter .
3-10 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Preparing for Server Co mponent Installation Serial Number Location The serial number for th e server is printed on a label on the to p of the server , near the front.
3-11 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Installing or Replacing Server Components War ni ng Bl.
3-12 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing Hard Drives or Solid State Drives This se.
3-13 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Drive Replacement Procedure T o replace or install a h.
3-14 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing a Drive Backplane Note The Small Form Factor (eight-d rive) and Large For m Factor (four -drive) backplanes and their corresponding chassi s drive bays are factory-config urab le options.
3-15 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-9 Replacing the Dr ive Backplane 1 Captive t.
3-16 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing Fan Modules The five fan modules in the server are numbered as follows when you ar e facing the front of the server (also see Figure 3-1 1 ).
3-17 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-1 1 Replacing F an Modules 1 Rubber dampenin.
3-18 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing DIMMs This section includes the following.
3-19 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-12 DIMM Slots and CPUs DIMM Population Rules Observe the following g uidelines when installing or rep lacing DIMMs: • Each CPU supports fou r memory channels.
3-20 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components • Although 1600 MH z DIMMs can be run in Power Saving Mode (1.
3-21 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents DIMM Sparing and Rank Sparing DIMM and rank sparing can be enable d in the BIOS configuration utility .
3-22 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components DIMM Replacement Procedure This section includes th.
3-23 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing CPUs and Heatsinks This server has two CPU sockets. Each CPU supports four DIMM channels (eig ht DIMM slots).
3-24 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Figur e 3-13 CPU Heatsink and Sock et Step 2 Remove a protective cap or an old CPU from the so cket (if present): • If you are r emoving an old CPU, skip to Ste p 3 .
3-25 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-15 Removing or Inser ting a CPU Step 4 Insert the new CPU into the Pick- and-Place tool: a. Remove the new CP U from the packaging and p lace it on the pedestal that is included in the kit.
3-26 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Figur e 3-16 CPU and Pick-and -Place T ool on Pedestal Step 5 Install a new CPU: a. Set the Pick-and-Place tool with CPU over the empty CPU socket on the motherboard.
3-27 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Apply about 2 cubic centimeters of grease (about half the syringe con tents) to th e top o f the CPU in the pattern that is shown in Figure 3-17 .
3-28 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing the Motherboard RTC Battery War ni ng There is danger of explosion if the battery is replaced i ncorrectly .
3-29 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-18 Replacing the Motherboard R TC Bat tery Replacing a Mezzanine Card The server has a dedicated socket on the mother board for a mezzanine-styl e RAID controller card.
3-30 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components e. Loosen the s i ngle capt iv e t hum bsc rew th at sec u res the mezzanine card to the motherboard standoff.
3-31 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing a PCIe Riser The server contains two t oolless PCIe risers for horizontal installation of PCIe cards.
3-32 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Figur e 3-21 Replacing the PCIe Riser 1 Chassis ali.
3-33 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing a PCIe Card Caution Cisco supports all PCIe cards qualified and sold by Ci sco. PCIe cards not qual ified or sold by Cisco are the responsibil ity of the customer .
3-34 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing a PCIe Card Note If you are ins talling a Cisc o UCS V irtual Interface C ard, there are prerequisi te considerat ions.
3-35 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents h. If the card that you replaced was a RAID controller , continue with Restoring RAID Conf iguration After Replacing a RAID Controller , page C-23 .
3-36 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Installing Multiple PCIe Cards and Resolving Limite.
3-37 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Resolving Insufficient 16-Bit I/O Space The system has only 64 KB of legacy 16-bit I/O resour ces availab le.
3-38 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing a Cisco Flexible Flash Card This section .
3-39 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Enabling a Cisco Flexible Flash Virtual Drive Each of the VDs on the pr e-installed Cisco Flexible Flash card can be separately enabled or hidden from the host.
3-40 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Booting the Hypervisor VD Y ou can boot the hypervisor (HV) VD with a more p e r manen t boot selectio n.
3-41 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Step 2 Install a Cisco Flexible Flash card: Note T o be usable for Cisco Flexible Flash, an SD card must be at least 16 GB in size.
3-42 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing the LSI RAID Battery Backup Unit or SuperCap Power Module This server supports installation of one RAID battery backup unit (BBU) or on e SuperCap Power Module (SCPM).
3-43 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-24 RAID Backu p Unit Mounting Location 1 RAI.
3-44 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Installing a Trusted Platform Module The trusted p latform m odule (TPM) is a smal l circu it board that attaches to a motherboard socket.
3-45 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Step 4 V erify that the TPM is now enabled. a. W atch during bootup for t he F2 prompt, and then press F2 to enter BIOS se tup.
3-46 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Step 1 V erify that a TPM is now installed and enab led in the server: a.
3-47 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing a SCU Upgrade ROM Module T o remove and replace a module, use the followi ng procedure. Step 1 Prepare the server for component installation: a.
3-48 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing a Software RAID Key Module T o remove and replace a software RAID key modu le, use the following procedure.
3-49 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing Power Supplies The server can have one or two power supplies. When two power supplies are installed they are redundant as 1+1.
3-50 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Enabling or Disabling the Internal USB Port The factory default is for all USB ports on the server to be enabled.
A-1 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 APPENDIX A Server Specifications This appendix lists t he technical specification s for the server and includ es the following sec.
A-2 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix A Server Sp ecifications Environmental Specifications Environmental Specifications Ta b l e A-2 lists the environmental speci fications for the server .
A-3 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix A Server Spec ifications Power Spec ifications Power Specifications The po wer specificatio ns for the two p ower suppl y.
A-4 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix A Server Sp ecifications Power Specifications.
B-1 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 APPENDIX B Power Cord Specifications This appendix pro vides supported po wer cable specif ications. Supported Power Cords and Plugs Each po wer supply has a separate po wer cord. Standa rd po wer cords or jumper power cords are av ailable for connection to the server .
B-2 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs CAB-9K10A- IT Pow er Cord, 250 V A C 10 A CEI 23-16 Plug Italy 8.2 2.5 Figure B-7 CAB-9K10A- SW Pow er Cord, 250 V A C 10 A MP232 Plug Switzerland 8.
B-3 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix B Po wer Cord Specifications Supported Power Cords and Plugs AC Power Cord Illustrations This section includes the A C power cord illustration s. See Figure B-1 through Figure B-15 .
B-4 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs Figur e B-4 CAB-9K1 0A -EU Figur e B-5 SFS-250V -1 0A- ID Figur e B-6 SFS-250V -1 0A- IS Connector : VSCC15 Cordset rating: 10A/16 A, 250 V Length: 8 ft 2 in.
B-5 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix B Po wer Cord Specifications Supported Power Cords and Plugs Figur e B-7 CAB-9K1 0A -IT Figur e B-8 CAB-9K1 0A -SW Figur e B-9 CAB-9K1 0A -UK Plug: I/ 3 G (CEI 2 3 -16) Connector C15M (EN60 3 20/C15 ) Cordset rating: 10 A, 250 V Length: 8 ft 2 in.
B-6 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs Figur e B-1 0 CAB-AC-250V/13A Figur e B-1 1 CAB-N5K6A -NA Figur e B-12 CAB-9K12A -NA Cordset rating 1 3 A, 250V (6.
B-7 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix B Po wer Cord Specifications Supported Power Cords and Plugs Figur e B-13 CAB-C13-CBN, Jumper P ower Cord (0.
B-8 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs.
C-1 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 APPENDIX C RAID Controller Considerations This appendix contain s the follo wing sections: • Supported RAID Cont rollers and Req.
C-2 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Supported RAID Cont rollers and Required Cab les Supported RAID Controllers and Required .
C-3 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Mixing Drive Types in RAID Groups Mixing Drive Types in RAID Groups Follo wing are the rules for mixing hard disk driv e (H D D) and solid state dri ve (SSD) types in a RAID group with the supported cont rollers.
C-4 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Factory-Default Option ROM Settings Factory-Default Option ROM Settings Ta b l e C-4 describes the option ROM ( OPROM) settings for card slo ts that are made at the factory for various conf iguratio ns.
C-5 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Mixing Drive Types in RAID Groups Mixing Drive Types in RAID Groups Follo wing are the rules for mixing h ard disk dri ve (HDD) and solid state dri ve (SSD) types in a RAID group.
C-6 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Migration RAID Controller Migration This server supports hardware RA ID (mezzanine and PCIe controller card s) and embedded software RAID.
C-7 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Embedded MegaRAID Controller Note VMware ESX/ESXi or any other virtualize d en vironmen ts are not supported fo r use with the embedded MegaRAID controller .
C-8 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Notes on Supported Embedded MegaRAID Levels The follo wing RAID lev els are supported by the embedded Me gaRAID controller .
C-9 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Installing a SCU Upgrade ROM Modu le For Embedded RAID SAS Support The SCU Upgrade R OM module contains a chip on a small circuit board.
C-10 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Installing a Software RAID Key Module for Embedded RAID 5 Support The software RAID key module cont ains a chip on a small c ircuit bo ard.
C-11 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Disabling the Embedded RAID Controller in the BIOS Caution Data migr ation from SW RAID to HW RAID is not supported and could result in data loss.
C-12 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Downloading the LSI MegaSR Drivers The MegaSR dri vers are included in the C-series dri ver ISO for your serv er and OS.
C-13 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller d. Copy the e xpanded folder to a USB t humb dri ve.
C-14 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Linux Driver Installation This section e xplains the steps to install the embedded MegaRAI D dev ice dri ver in a Red Hat Enterp rise Linux installation o r a SuSE Linux Enterprise Serv er installation.
C-15 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Step 4 If necessary , use this command to change the file name of the dr iv er update disk to a name with fe wer than eight characters: copy dud-[ driver version ].
C-16 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Installing the Red Hat Linux Driver This section describes the fresh i nstallation of the Red Hat Enter prise Linux 5.
C-17 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Step 10 Press Enter . The prompt asks whet her you hav e a driv er disk. Step 11 Use the arrow ke y to select Ye s , and then press Enter .
C-18 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller c. Select the check box in the Mapped column for the med ia that you just added, then wa it for mapping to complete .
C-19 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Cabling RAID Controller Cabling This section includes the following top.
C-20 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Cabling Cisco UCS C220 Server Cabling This section contains the followin.
C-21 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Cabling Cisco UCS RAID SAS 2008M-8i Mezzanine Card This option can co ntrol up to eight d riv es. The required UCSC-CABLE1 cable kit has two mi ni-SAS cables.
C-22 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Cabling LFF 4-Drive Backplane Cabling The cable connections required for each t ype of controller ar e as follo ws: Embedded RAID This option can co ntrol up to four d riv es.
C-23 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Restoring RAID Configuration Af ter Replacing a RAID Controller Restoring RAID Configuration After Replacing a RAID Controller When you replace a RAID controller, the RAID co nfigu ration that is stored in the controller is lost.
C-24 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations For More Information.
D-1 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 APPENDIX D Installation for Cisco UCS Integration The Cisco UCS integratio n instructions ha ve been mov e d to the inte gration g.
D-2 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix D Installati on for Cisco UCS Integration.
An important point after buying a device Cisco Systems UCSRAID9266CV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems UCSRAID9266CV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems UCSRAID9266CV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems UCSRAID9266CV you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems UCSRAID9266CV will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems UCSRAID9266CV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems UCSRAID9266CV.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems UCSRAID9266CV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems UCSRAID9266CV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center