Instruction/ maintenance manual of the product UCSCRAIDMZ220 Cisco Systems
Go to page of 13
Aironet and WLAN Controller Product Power Options Document ID: 21480 Contents Introduction Prerequisites Requirements Components Used Conventions Cisco Discovery Protocol Power Options Aironet 350 Ser.
Aironet 1000 Series Lightweight APs ♦ Aironet 1100 Series APs ♦ Aironet 1130 AG Series ♦ Aironet 1140 AG Series ♦ Aironet 1200 Series ♦ Aironet 1230 AG Series ♦ Aironet 1240 AG Series ♦ .
Power Options Aironet 350 Series APs Power to Aironet 350 Series equipment is supplied through Category 5 cable to the Ethernet port (inline). There is no separate power socket on the 350 Series equipment. The option to supply power to the devices over the data cable infrastructure eliminates the need for local power and AC infrastructure costs.
You can connect these devices to the 350, 1100, and 1200 Series of products: Note: This list is not all−inclusive. Catalyst 6500/6000 Series Switches: WS−X6148−GE−TX ♦ WS−X6148V−GE−TX .
Power Injector module (AIR−PWRINJ or AIR−PWRINJ3) The Power Injector module is a simple device with two ports: One port connected to the bridge or AP ♦ The other port connected to the wired part.
written. Check with your local Cisco sales office or the Products pages on Cisco.com for a current list of devices that support inline power devices, such as the IP telephones and the Aironet devices.
Aironet 1200 Series, 1230 AG, and 1130 AG APs The nominal voltage for 1200 Series APs is 48 VDC, and the AP is operational up to 60 VDC. You can power the 1200 Series APs in one of these ways: A switc.
In order to overcome this problem, issue the config ap power injector enable <Ap name as shown on the controller> installed command on the controller that is connected with this AP. This command is available from controller version 3.2.116.21. Ensure that you use the correct version in the controller.
Aironet 1400 Series Bridge The Cisco Aironet 1400 Series Wireless Bridge ships with all of the components and accessories necessary to complete most deployments. These components and accessories include: The Cisco Aironet Power Injector LR for supplying power to the bridge without expensive electrician costs (Power Injector).
Aironet 1300 Series Access Point/ Bridges Power Injector A flexible outdoor wireless bridge or access−point solution is provided through the combination of the Cisco Aironet 1300 Series, a power injector, and options for both antennas and mounting. This diagram shows how the units connect.
1300 Series Outdoor Access Point/Bridge and Cisco Aironet 1300 Series Access Point/Bridge Power Injector. Aironet 1500 Series APs You can use either of these methods in order to power the Aironet 1500 Series APs: Local AC power • DC PoE • Power that is supplied at the top of streetlight poles is AC power.
Cisco 2000 Series WLCs The Cisco 2000 Series WLC supports up to six lightweight APs, which makes it ideal for small− to medium−sized Enterprise facilities, such as branch offices. The PoE option is not supported on the 2000 Series WLC because the controller does not supply PoE.
Cisco 4100 Series and 4400 Series WLCs The Cisco 4100 Series WLCs and 4400 Series WLCs are designed for medium− to large−sized Enterprise facilities. Both series support the PoE option. You can use the PoE option to power the lightweight APs that connect to the controller.
An important point after buying a device Cisco Systems UCSCRAIDMZ220 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems UCSCRAIDMZ220 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems UCSCRAIDMZ220 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems UCSCRAIDMZ220 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems UCSCRAIDMZ220 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems UCSCRAIDMZ220, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems UCSCRAIDMZ220.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems UCSCRAIDMZ220. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems UCSCRAIDMZ220 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
