Instruction/ maintenance manual of the product SCZ 71800 F0 AEG
Go to page of 24
SCZ71800F0 EN User manual.
CONTENTS 1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. SAFETY INFORMATION In the interest of your safety and to en- sure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings.
2. Make sure that the power plug is not squashed or damaged by the back of the appliance. A sq uashed or damage d power plug ma y overheat and cause a fire. 3. Make sure that you can co me to the mains plug of the appliance. 4. Do not pull the mains cable.
1.6 Service • Any electrical work required to do the servicing of the appliance should be carried out by a qualified electrician or competen t person. • This produ ct must be se rviced by an authorized Service Centre, and only genuine spare parts must be used.
2.3 Switching off the fridge To switch off the fridge: 1. Press the Mode button until the cor- responding icon appears. The fridge Off indicator and the fridge compartment indicator flash. The fridge temperature indicator shows dashes. 2. Press the OK button to confirm.
It is possible to change the time d uring the countdown and at the end by press- ing the Temperature colder button and the Temperature warmer button. 2.10 Child Lock function To lock the buttons from unintentional operation select the Child Lock function.
3. DAILY USE 3.1 Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly.
3.7 Movable shelves The walls of the refrigerator are equip- ped with a series of runners so that the shelves can be po sitioned as desired. For better use of space , the front half- shelves can lie over the rear ones.
3.11 Humidity control Both drawers can be used according to the desired storage conditions inde- pendently of each other w ith lower or higher humidity. Regula tion for e ach drawer is separate and is controlled using the slide valve at the front of the drawer.
Type of food Air humidity adjust- ment Storage time Butter “dry” up to 1 month Large pork cuts “dry” up to 10 days Beef, veniso n, small pork cuts, poultry “dry” up to 7 days Tomato sauce .
Cakes containing cream and oth- er kinds of pastry pr oducts can be stored in the Long fresh 0°C compartment for 2 or 3 days. Not to be placed in the Long- fresh 0°C compartment: • cold sensitive .
Cooked foods, cold dishes, etc..: these should be covered and ma y be placed on any shelf. Fruit and vegetables: these should be thoroughly cleaned and pla ced in the special drawer(s) provided.
Do not pull, mov e or damage any pipes an d/or cables inside the cabinet. Never use detergents, abrasive powders, highly p erfumed clean- ing products or wax polishes to clean the interior as this will dam- age the surface and leave a strong odour. Clean the condenser (black grill) and the compressor at the back of the appliance with a brush.
To remove the frost, foll ow the instruc- tions below: 1. Switch off the appliance. 2. Remove any stored food, wrap it in several layers of newspaper and put it in a cool place. CAUTION! Do not touch frozen goods with wet hands. Hands can freeze to the goods.
6. WHAT TO DO IF… WARNING! Before troubleshooting, discon- nect the mains plug from the mains socket. Only a qualified electrician or competent person must do the troubleshooting that is not in this manual.
Problem Possible cause Solution The compressor does not st art imme- diately after press- ing the FROSTMAT- IC or COOLMATIC button, or after changing the tem- perature . This is normal, no error has occurred. The compressor starts af- ter a period of time.
Problem Possible cause Solution dEMo appears on the Display. The appliance is in dem- onstration mode (dEMo). Keep pressed approxi- mately 10 sec. the OK but- ton since a long sound of buzzer is heard and the Display shut off for a short while: appliance start works regularly.
1 2 3 4 5 The wires in the mains lead are coloured in accordance with the following code: 1 Green and Yellow: Earth 3 Brown: Live 5 Blue: Neutral As the colours of the wires in the mains lead of this appliance may not corre- spond with the coloured markings iden- tifying the terminals in your pl ug, pro- ceed as follows: 1.
7.4 Installation of the carbon air filter 1 2 The carbon air filter is an active carbon filter which a bsorbs bad odors and per- mits to maintain the best flavour and ar- oma for all foodstuffs without risk of odor cross contamination. On delivery the carbon filter is in a plas- tic bag to maintain it’s duration and characteristics.
CLICK! CLICK! SSSRRR! SSSRRR! BRRR! BRRR! HISSS! HISSS! BLUBB! BLUBB! CRACK! CRACK! ENGLISH 21.
9. TECHNICAL DATA Dimension of the recess Height 1780 mm Width 560 mm Depth 550 mm Rising Time 24 h Voltage 230-240 V Frequency 50 Hz The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label.
ENGLISH 23.
www.aeg.com/shop 222338293-A-172012.
An important point after buying a device AEG SCZ 71800 F0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AEG SCZ 71800 F0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AEG SCZ 71800 F0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AEG SCZ 71800 F0 you will learn all the available features of the product, as well as information on its operation. The information that you get AEG SCZ 71800 F0 will certainly help you make a decision on the purchase.
If you already are a holder of AEG SCZ 71800 F0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AEG SCZ 71800 F0.
However, one of the most important roles played by the user manual is to help in solving problems with AEG SCZ 71800 F0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AEG SCZ 71800 F0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
