Instruction/ maintenance manual of the product SFS 7024 Cisco Systems
Go to page of 104
. Corporate He adquarters Cisc o Syst ems , Inc . 170 West Ta sman Drive San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 526-4100 Cisco SFS 7024 Ha.
THE SPECIFICATIONS AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENT S, INFORMATI ON, AND RECOMME NDATIONS IN T HIS MANUAL A RE BELIEV ED TO BE ACCURATE BUT ARE PRES ENTED WI THOUT WARRANTY OF ANY KIND, E XPRESS OR IMPLIED.
Content s i Cisco SFS 7024 Hardware Use r s Guide OL-8794-02 New and Changed Inf ormation vii Preface ix Audienc e ix Organi zation ix Conv enti ons x Relat ed D ocum ent ation x Obtain ing Documentati on x Cisco.
Cont ents ii Cisco SFS 7024 Har dware Users Guide OL-8794-02 Insta lla tion 2-7 Plann ing th e Inst alla tion 2-8 Enviro nmental Requir ements 2-8 Rack Spec ifications an d Recommendations 2-9 Instal .
Content s iii Cisco SFS 7024 Hardware Use r s Guide OL-8794-02 Home Page 3-34 ? (Hel p) Button 3-34 Support Button 3-34 Displa ying the Leaf and Sp ine Module Views 3-35 Leaf Mo dule Vi ew 3-35 Spin e.
Cont ents iv Cisco SFS 7024 Har dware Users Guide OL-8794-02 Config uring the Switch Defaul t Gateway IP Address 3-68 Spine Vi ew M enu 3-70 Logg ing 3-70 Purg ing the Log 3-71 Sele ct Boot Image 3-72.
Content s v Cisco SFS 7024 Hardware Use r s Guide OL-8794-02 Pro blem C-85 Fix C-8 5 Fan C-86 Pro blem C-86 Fix C-86 OOB Et her net RJ 45 Po rt C-86 Pro blem C-86 Fix C-86 SFS 7024 Lea f Module IB Por.
Cont ents vi Cisco SFS 7024 Har dware Users Guide OL-8794-02.
vii Cisco SFS 7024 Hardware Use r s Guide OL-8794-02 New and Changed Information The Cisco SFS 7024 Har dware Users G uide applies to the SFS 7024 Release 3.1 or later . Ta b l e 1 lists the new and change d features avai lable with each supported SFS 7024 r elease.
viii Cisco SFS 7024 Har dware Users Guide OL-8794-02.
ix Cisco SFS 7024 Hardware Use r s Guide OL-8794-02 Preface This pr eface d escrib es the audie nce, o rganizatio n, an d co n ventions o f the Cisco SFS 7024 Har dware Users G uide . It a lso provid es info rmat ion on how to obtain r elated documen tation .
x Cisco SFS 7024 Har dware Users Guide OL-8794-02 Conven tions This document use s the follo wing con ventio ns for notes, cautions, and safety warnings . Notes and Ca utions co ntain importan t informa tion th at you shoul d be aware of. Note Means r eader tak e note .
xi Cisco SFS 7024 Hardware Use r s Guide OL-8794-02 Ordering Docume ntation Y ou can find ins tructio ns for orderi ng do cument atio n at thi s U RL: http://www .cisco.com/uni vercd/ cc/td/doc/es_i npck/pdi.htm Y ou can order Cisco docum entati on in these ways : • Re gistered Cis co.
xii Cisco SFS 7024 Har dware Users Guide OL-8794-02 Note U se the Cisco Product Ident ification (CPI) to ol to locate your produ ct ser ial nu mber b efore subm itting a web or phone re quest for service.
xiii Cisco SFS 7024 Hardware Use r s Guide OL-8794-02 Obtaining Ad ditional Publication s and Information Informa tion about Cisco pro ducts, tec hnologie s, and net work solutions i s av a ilable from various online and print ed source s. • Cisco Ma rketplace p rovides a variety of Cisco books, referenc e gu ides, and logo merch andise.
xiv Cisco SFS 7024 Har dware Users Guide OL-8794-02.
C HAPTER 1-1 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 1 Product Overview The Cisco SFS 7024™ is an i ndustry leading modular system used for crea ting lar ge, single-system Grid/Cluster serv er fabr ics, or as a b uilding block for larger fabric s.
1-2 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter SFS 7024 Product Specificati ons Mechanic al/Thermal/Pow er Spec ifications • 14U - 19" rack mo unt environment • Integrate d ther .
1-3 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter • A v ailabl e power (all fiber): 1758 W atts max • A vailable air fl ow : 200 cfm • Thermal stat us reporting to CME via IBML • Up.
1-4 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter – Reset the lo gs – Perform ma inte nance task s – Manage firmware upda tes, inc ludin g upl oading new firmware and setti ng the active version. Subnet Ma nager Every InfiniBand fabric subnet re quires a sin gle active Subnet Manager (SM) to initialize and maintain the sub net.
1-5 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Subnet Managemen t Subnet Manag em ent Agent s A Subnet Man agement Age nt proce sses manage ment reque sts from th e Subnet Ma nager . Subnet Managem ent A gents are im pleme nted o n al l node s withi n the InfiniBand fabric .
1-6 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter • The Communicat ions Manager (C M ) The CM est ablish es and manage s communi cation ch anne ls between nod es.
C HAPTER 2-7 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 2 Installation This chap ter des cribes ho w to install the Cisco SFS 7024™ and its components, and it includes the follo wing informati.
2-8 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter War ni n g IMPO RT ANT SAFETY INS TRUCTIO NS This warning symbol means dang er . Y ou are in a sit uation that could cause bodily injury .
2-9 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Rack Specificat ions and R ecommendations The SFS 7024 switch is d esigned to be installed in an existing 19-in ch equipme nt rack or server rack. The SFS 7024 switch i s designed for a four-pos t server cabin et.
2-10 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Figur e 2-3 Bend Radius Measur ement Diagr am • Support cab le using a c able mana ger mount ed above connector s to av oid unnec essary we ight on th e cable bundles. • Bund le ca bles usi ng v elcro stra ps to av oid da magi ng ca bles.
2-11 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Installation Tasks Checklist T o perform the actual switch instal lation, t he site implemen tation engin eer must perf orm the follo wing tasks, which are detai led in this section.
2-12 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Precauti ons for R ack-Mountable Pr oducts War ni n g Installing sy stem components in a rack without th e front an d side stabilizers install ed could cause the rack to tip over . Therefore, alway s install the stabilizers before instal ling components in the rack.
2-13 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter War ni n g This unit may have more than one power cord. T o reduce the risk of electri cal shock, disconnect both cords before servicing the unit. War ni n g T o avoid poten tial electrical shock, operate this unit onl y when the cover is in place.
2-14 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Check the Installation Site The SFS 7024 switch is designe d to be instal led in an existing server ca binet ( not a telco c abinet) , whe re it can be mounted in a standar d equipment rack.
2-15 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Installation Tasks The follo wing is an overv iew of the insta llation tasks detaile d in this section: Step 1 If appl icab le, rem ove the do ors of t he ra ck. Step 2 Mark th e rack, a llo wing 14 U ( 24.
2-16 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Note The 2 front holes should match up with the top and botto m holes of th e rail fron t flange . All hol es shoul d c orresp ond to the ra il m ountin g posit ions (i .e., the hol es m arked w ith pe n or t ape).
2-17 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Step 1 Remove the necessary spi ne mod ules, spine module bl anks, leaf mo dules , and leaf mod ule bla nks. For detailed in structions, p lease refer to the section Removing a Mod ule or Blank , pag e 2-18 .
2-18 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Figur e 2-5 SFS 7024 Chas sis — Leaf Module Slot N umber ing Step 2 T o install a module or filler , hold it so that the ejec tor handles are on the bottom . Step 3 Pull the handles out to e xtend them.
2-19 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Connect Equipment to the Ports and Pow er On the System Note Before performing the tasks in this section, tak e a few minut es to revie w Figure 2- 6 and Fig ure 2- 7 belo w .
2-20 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Figur e 2-7 SFS 7024 Chas sis Bac k View Step 1 Connect a Cate gory 5 or 6 (Cat 5/6) Ethernet cable to o ne of the RJ- 45 connectors on the SFS 7 024. Connect the other end of the Cat 5/6 to the OOB LAN workstati on.
2-21 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Note Whe n handling IB conne ctors, ma ke certa in to remove the connec tors by pulling on the center o f the lanyard only as sh own in Figure 2-8 below .
2-22 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Note If the spine module RS-232 port is conne cted to a terminal emulatio n program, the user will be able to view the switch boot pr ocess. Be cer tain to use a null-mo dem/cr os sover se rial cab le fo r the conso le po rt.
2-23 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter – 56K baud – Use VT10 0 emul ation . – Flo w control = XON/X OFF Step 2 Po wer up the SFS 70 24. Note If using the RS-232 por t, skip to St ep 6 . Steps 3 throug h 5 are for those user s accessing the SFS 70 24 via T elnet or SSH.
2-24 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter – Spine 5: 192.1 68.0.13 – Spine 6: 192.1 68.0.14 It is necessary for eac h mana ged sp ine t o have a unique IP a ddress f or t he fol lowing reason s: • Unique IP add resses are used when sending syslog message s from a mana ged spine to a sys log server .
2-25 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Mounted raw file system on device /dump0. (size=1048576 bytes) Mounted flash file system on device /rfa1. (size=2097152 bytes) Unified Boot Manager [1] image1 [2] image2 CPU: Broadcom BCM1125 VxWorks Version: 5.
2-26 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter startup script (s) : other (o) : sbe Loading package from flash device /image1 ... Boot System = 7024 Boot Image Information: Product = SFS7012 BSP = t3 Version = 3.
2-27 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter • Any spin e module Attention LED is on, or it has been determined that a spine is not function ing (e ve n if it is unable to light the LED).
2-28 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter AC O K – Amber indicates that A C po wer is normal. – Off indic ates a AC po we r failure or no A C power is presen t.
2-29 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter – Gr een ind icates t hat a manage ment boa rd is pres ent. – Off indic ates that no manage ment boa rd is pres ent. • Act: – Gr een indicates that managemen t board is in the act ive mo de.
2-30 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Figur e 2-1 1 Sample Chassis Viewer On-line Help Scr een Shutdown Procedures In orde r to sh utdown the SFS 7024: Step 1 Po wer do wn the switch by r emov ing the po wer cords f rom the A C po wer inlets.
2-31 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Rebooting Mult iple Managed Spines In a redundant manage ment con figuration it may oc casion ally be necessary for t he user to re boot both managed spines in a hemisp here. This is ac complishe d th rough the C LI of t he ma ster spin e.
2-32 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Step 1 Remove the module by pushing up on the han dles to disen gage fro m the lock notch. O nce the hand les are disenga ged, gent ly pull th e handles out and slide the modu le out of the slot.
C HAPTER 3-33 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 3 Operations and Administration This c hapter descri bes how to admini ster a nd configur e the Cisco SFS 7024™ and its c ompon en ts, .
3-34 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Home Page Figur e 3-1 Chas sis Viewer H o m e Pa ge The Chassis V iew er ’s home page pr ovides a high-level o verview of each hemisphere of the SFS 7024 switch a nd indi vidual leaf and sp ine modules.
3-35 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Figur e 3-4 Suppor t Contact Scr een Displaying th e Leaf and Spine M odule View s Leaf Module View T o display the leaf module view for the SFS 7024: Step 1 Mouse over the leaf modul e to disp lay .
3-36 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Figur e 3-6 Leaf Modu le View Spine Module View T o display the spine module view for the SFS 702 4: Step 1 Mouse over the spin e modu le to displ ay .
3-37 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Leaf and S pine Modu le Compo nent Details Are a The Component De tails Area contain s three areas.
3-38 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Displaying the Chassis View There are tw o ways to display the chassis vie w for the SFS 7024: Step 1 Mouse o ver the o uter re gion of the lea f module v iew .
3-39 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Figur e 3-13 Chassis V iewer Compone nt Details Ar ea Chassis V iew Co mponent Deta ils Area The Component De tails Area contain s three areas.
3-40 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Figur e 3-15 Reboot Windo w Step 2 Select th e radi o bu tton of th e spine to be reb ooted, or select th e radio butto n to rebo ot the entire hemispher e.
3-41 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Chassis V iew Co mponent Informatio n Area Figur e 3-16 Component In for m ation Ar ea The Chassis V iew Component Information Ar ea allo ws the user to monitor important informati on for each spec ific hardw are componen t, as we ll as i mportant system informatio n.
3-42 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Figur e 3-1 7 LEDs and Se nsors T ab Note For a de tailed explanati on of physic al LEDs on the hardware compo nents, p leas e refer to the section SFS 7024 Compone nt LED s, page 2-26 .
3-43 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter System Name The n ame for th e syste m , assig ned b y an administ rator . One co n vention is to use the sy stem's fully qualified domai n name as the System Name . System Location The l ocation of t he s ystem, assig ned by an admi nistrat or .
3-44 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter A button fo r each row that disp lays a dditional detai l about the c omponent . Add itional details includ e: Mo del, V e rsion, M anufact.
3-45 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Configuration a nd Monitoring Feature s The fol lo wing section provid es detaile d, task-orien ted descriptio ns for conf iguring and monitorin g the SFS 7024 sw itch and its feature functionality .
3-46 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Figur e 3-20 Logging Sub menu Set Level Figur e 3-21 Set Leve l Butt on The Set L ev el butt on allo ws the user to set log lev el conf iguration paramete rs for al l software m odules on the SFS 7024.
3-47 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Figur e 3-23 Device T ab: Sof twar e Module Con figur ator T o change an y Log Le vel se ttings : Step 1 Click the On-O ff checkbox to the right of the setting. Step 2 Click the Submit button to save any change s.
3-48 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Debug message levels 1 through 5 : Debug message s are for suppl ier an d/or Cisc o enginee ring use and ar e not nece ssari ly in dicat ive of actions that an en d user may nee d to take. – DEBUG 1 – M essag es tha t descr ibe the states of c onnect ions a nd lin ks.
3-49 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Syslog Tab Figur e 3-25 Log S ystem Configurat or: S yslog Host T ab The Syslog tab allo ws the user to save log f iles to a syslog host. T o setup the sysl og host: Step 1 In the Host IP dialog box, enter the IP addre ss of the syslog host w here the log files are to be saved.
3-50 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Figur e 3-27 Reset Log Lev els Window Step 4 T o reset th e logg in g levels, cli ck OK . Firmware Update Figur e 3-28 Fir mwar e Update Bu tt on SFS 7024 The Firmware Up date bu tton allow s th e user to selec t an alternate f irmware f ile for the SFS 7024.
3-51 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter SNMP The SNM P submen u allo ws the u ser to config ure an d f ilter SNMP trap inf ormati on.
3-52 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Figur e 3-32 SNMP T arg et Configu ratio n Windo w The t op sect ion of the w indow , SNMP T arget Addr esses, allows the u ser t o det ermine w hat t ype of SNMP trap s are sent, and wher e the y are sent.
3-53 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Note The combination of the T ransport Do main and t h e T ransport Address determines the trap destination. • Port Specifies the TCP port which the SNMP trap will be s ent. • Ti m e o ut Specifies the time that the trap sen der waits on a respo nse before re-sending the trap.
3-54 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter • Security Model The Secu rity Model t o be us ed when g enerating SN MP messages using this en try . V alues for this field are 1, 2, or 3. • Security Name Securit y name identif ies the e ntity for whom SNMP messag es will b e generated .
3-55 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Step 1 From th e me nu, sele ct SNMP Step 2 Click Filter Status . The SNMP Filter St atus sc reen is di splaye d.
3-56 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Figur e 3-36 Set Community Str ings Window Th e fir s t fi el d , " Read Only Comm. Name ," is the c ommunity st ring that wh en spe cified in an SNMP client , allows re ad o nly ac cess to SNMP fields expor ted by t he SNM P server .
3-57 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Step 5 T o save settings, click on A pply . Foll owing are def initions for each chassis trap: Chassis Group icsChassisT rapSystemSelfT estFailur e This trap indicates th at the chassis failed one or more of its self-test(s).
3-58 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter This trap indica tes that a po wer supply is not responding to HEAR TBEA T poll requests, that are issued by the internal chassis management service. icsChassisT rapPowerSupplyInserted This trap indicates th at a power supply was inserted into the chassis.
3-59 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter SFS 7024 Port Statistics The Chassis V iew P ort Statisti cs area p rovid es IB port inform ation for all of th e extern al and intern al ports of the SFS 7024.
3-60 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Note Spin e chips are re fere nced by the spine numb er and the sw itch chip iden tif ier .
3-61 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Recei ve 32 B it W ords : The num ber of 32 -bit d ata words received by the port, n ot incl uding flow contr ol and VCRC data. Tr a n s m i t P a c k e t s : The numbe r of data pa ckets transm itted by the por t, not incl uding fl ow con trol packet s.
3-62 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Leaf and Spine Module IB Port Statistics T o access IB port stat istics for a speci fic leaf or spine m odule, perfo rm the follo wing steps. Leaf Modules Step 1 Select a leaf module. The leaf m odule vi ew is d isplaye d.
3-63 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Figur e 3-44 Spine P ort Sta tistics Windo w For information on the each IB port s tatisti c fie ld, refer to th e section Port Statistics.
3-64 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Figur e 3-46 Set Er ror Repor ting Thr esholds Scre en Step 3 T o change a thre shold va lue for an y field : a.
3-65 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Note Th e thresh olds for t he following fields are set base d upon the number of error message which can oc cur in one second.
3-66 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Figur e 3-47 Switc h Time Service T o s et the system time: Step 1 From th e me nu, cli ck Ti me Se rvic e .
3-67 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Step 1 Make sure the Use Network T ime Protoc ol? check box is unche cked. Step 2 Set the cur rent date and time using the d rop-do wns for Month , Day , and Ye a r as we ll as Hour , Minute , Seconds , and AM/PM .
3-68 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Note Beginning in 200 7, Dayligh t Saving T ime in t he United St ates b egins at 2 a.m. on the se cond Su nday of Marc h, and en ds at 2 a. m. on the fi rst Sunday i n Nov ember . – 2006 = Oct.
3-69 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Figur e 3-54 Set Sw itch Def ault Gat eway I P Addr ess But ton Step 2 Click in the OOB IP Addr ess fie ld . Figur e 3-55 Set Def ault Gate wa y IP Windo w Step 3 T ype in the correct switch def ault gate way IP address.
3-70 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Spin e View Menu Figur e 3-56 Spine V iew Menu Note For i nforma tion on IB port sta tistic s re fer to the se ctio n SFS 7024 Port Statistics, page 3-59 . Logging The Lo gging subme nu allows the user to view , set le vels, reset levels, and purge the me ssage log f ile.
3-71 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Step 1 From th e me nu, sele ct Logging. Step 2 Click Vi ew Lo g . The log m essag e win dow is displ ayed: Figur e 3-59 Sample Mess age L.
3-72 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Figur e 3-61 Purg e Log Confir mation Windo w Step 3 Click OK . Step 4 The messa ge log file is now pur ged. Select Bo ot Image The Select Boot Image button allows the user to choose an alternativ e bo ot image for the SFS 7024 .
3-73 Cisco SFS 7024 Ha rdware Users Gui de OL-8794-02 Chapter Adding a New License Key Step 1 Click Lice nse K e ys . The K ey A dministration button is displayed: Figur e 3-64 Licen s e Key Subm enu Step 2 Click K e y Administra tion .
3-74 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Chapter Figur e 3-68 Lice nse K ey Delet e Prompt Step 4 Click OK to dele te..
A-75 Cisco SF S 7024 Hardware Users Gui de OL-8794-02 APPEND IX A Technical Specifications Ta b l e A- 1 SFS 7024 T echnica l Specifica tions Switch Phys ical Dime nsio ns • 14U high (24.5”) • 19" rac k mo unt ( 17.32 " wi de) • 25 3/4" deep (without cabl es) W eight • 175 lb.
A-76 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Appe ndi x.
B-77 Cisco SF S 7024 Hardware Users Gui de OL-8794-02 APPEND IX B Command Line Interface This a ppend ix incl udes the fo llowing inf ormatio n: • Command s and Functiona l Groups , pag e B-78 • A.
B-78 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Appe ndi x The CLI is also accessible through the RS232 serial port o f the SFS 7 024. Acc essing the CLI through the seri al port never requires a login and password and defau lts to a dminist rator privileges.
B-79 Cisco SFS 7024 Hardware Use r s Guide OL-8794-02 Append ix T o list commands within a functional g roup, simply type in the f unctional group name.
B-80 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Appe ndi x T ype the appro priate use rnam e and press Enter . Step 3 The system pro mpts fo r a password. The CLI has the following default passwords: – Operat or access: operpass – Administrator access: adminpass T ype the ap propri ate password a nd pre ss Enter .
B-81 Cisco SFS 7024 Hardware Use r s Guide OL-8794-02 Append ix bootQuery Query boot image information bootSelect Change boot selection fwListFiles Lists the contents of the firmware RAM disk fwShowUp.
B-82 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Appe ndi x Displays internal memory usage chassisQuery Displays information about the line cards in a chassis Log logShow Display the Log file logC.
B-83 Cisco SFS 7024 Hardware Use r s Guide OL-8794-02 Append ix Access the snmpTargetParamsTable snmpNotifyProfile Access the snmpNotifyFilterProfileTable snmpNotifyFilter Access the snmpNotifyFilterT.
B-84 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Appe ndi x.
C-85 Cisco SF S 7024 Hardware Users Gui de OL-8794-02 APPEND IX C Troubleshooting This appe ndix describe s how to troubleshoot the Cisco SFS 7 024™, an d it inclu des the following inform ation: .
C-86 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Appe ndi x Fan OOB Ethernet RJ45 Port SFS 7024 Leaf Module IB P orts Problem Fix Red LED is lit Call T ech Support Fan not ru nning Ensure fan is seated properly .
C-87 Cisco SFS 7024 Hardware Use r s Guide OL-8794-02 Append ix Troubleshooting Scenarios InfiniBand This section documents common problems seen with the SFS 7024 switch. Invalid IP Address entered for SWC via Console Port Symptoms Cannot access the Chassis V iewer bro wser window .
C-88 Cisco SFS 7024 Har dware Users Guide OL-8794-02 Appe ndi x.
An important point after buying a device Cisco Systems SFS 7024 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems SFS 7024 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems SFS 7024 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems SFS 7024 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems SFS 7024 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems SFS 7024, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems SFS 7024.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems SFS 7024. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems SFS 7024 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
