Instruction/ maintenance manual of the product OL-8978-02 Cisco Systems
Go to page of 56
CH A P T E R 55-1 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 55 Configuring a VoIP Network This chapter describe s how to configure a V oice-ove r -IP (V oIP) netwo rk on the Catalyst 6500 series switches.
55-2 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Understanding How a VoIP Netw ork Works Understanding How a VoIP Network W.
55-3 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Understanding How a VoIP N etwork Works The IP phone is Dynamic Host Conf iguration Protocol (DHCP) capable. Optio nally , you can program the IP phone with a stat ic IP address.
55-4 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Understanding How a VoIP Netw ork Works Figur e 55-2 Conne cting the Cisco.
55-5 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Understanding How a VoIP N etwork Works Cisco CallManager Cisco CallManage.
55-6 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Understanding How a VoIP Netw ork Works Analog Trunk Gateway The Cisco access analog trunk gatew ays allow the IP PBX to connect to the PSTN or PBX.
55-7 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Understanding How a VoIP N etwork Works Converged Voice Gateway The Cisco .
55-8 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Understanding How VLA Ns Work • One or two T1 digi tal ports for connect.
55-9 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Understanding How VLAN s Work Note For more information about the VLANs, see Chapt er 11, “Conf iguring VLANs. ” Figure 55-3 sh ow s ho w to connect a Cisco IP Phone 7 960 to a Catalyst 6500 series swit ch.
55-10 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Understanding How CD P and VoIP Work Understanding How CDP and VoIP Work Cisco Discov ery Protocol (CDP) was enhanced in so ftw are release 8.
55-11 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Configuring VoIP on a Switch Configuring Per-Port Power Management This section describes the per -port power management and the CLI commands that are used to conf igure po wer management for IP phones.
55-12 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Configuring VoIP on a Switch This section descri bes the follo wing topic.
55-13 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Configuring VoIP on a Switch Mod Sub-Type Sub-Model Sub-Serial Sub-Hw Sub-Sw --- ----------------------- ------------------- ----------- ------ ------ 1 L3 Switching Engine II WS-F6K-PFC2 SAD044302EA 1.
55-14 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Configuring VoIP on a Switch Each port also has a stat us that is def ined as one of the f ollo wing: • on—Po wer is supplied by the port.
55-15 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Configuring VoIP on a Switch Available Power T able 55-5 lists the a vailabl e po wer that can be supplie d for each port for the v oic e daughter cards.
55-16 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Configuring VoIP on a Switch High-Availability Support T o support high a.
55-17 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Configuring VoIP on a Switch Setting the Power Mode of a Po rt or a Group.
55-18 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Configuring VoIP on a Switch This exampl e sho ws ho w to set the def aul.
55-19 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Configuring VoIP on a Switch This exampl e sho ws ho w to display the det.
55-20 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Configuring VoIP on a Switch Slot Inline Power Requirement/Usage : Slot C.
55-21 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Configuring VoIP on a Switch Auxiliary VLAN Configuration Guidelines This.
55-22 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Configuring VoIP on a Switch The default set ting is none . T able 55-6 lists th e set port auxil iaryvlan command keywords and their descriptions.
55-23 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Configuring VoIP on a Switch This exampl e sho ws ho w to enable or disab.
55-24 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Configuring VoIP on a Switch These examples sho w ho w to configure the port v o ice inte rface for the DHCP , TFTP , and DNS servers: Console> (enable) set port voice interface 7/1 dhcp enable Port 7/1 DHCP enabled.
55-25 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Configuring VoIP on a Switch This exampl e sho ws ho w to display the FDL.
55-26 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Configuring VoIP on a Switch This section provides the show port command .
55-27 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Configuring VoIP on a Switch Port CallManagerState DSP-Type -------- ----.
55-28 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Configuring VoIP on a Switch 7/7 10.
55-29 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Configuring VoIP on a Switch 3/19 onhook 1 full 64k FXS 3/20 onhook 1 ful.
55-30 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Configuring VoIP on a Switch This e xample sho ws all the acti ve calls i.
55-31 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Configuring VoIP on a Switch Receive bytes : 2342342332423 Receive packets : 23423423402384 Transmit bytes : 23472377 Transmit packets : 94540 Channel #3: .
55-32 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Configuring VoIP on a Switch Y ou can configure the Cisco IP Phone 7960 access port (see Figure 55-5 ) to either trusted or un trusted mode.
55-33 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Configuring VoIP on a Switch This exampl e sho ws ho w to set the phon e .
55-34 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Configuring VoIP on a Switch Supported Cisco IP Phones These Cisco IP pho.
55-35 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Configuring VoIP on a Switch T rusted Boundary Configuration Guidelines T.
55-36 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Configuring VoIP on a Switch Figure 55-6 Deter mining the Fi nal T rust V.
55-37 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Configuring VoIP on a Switch Default Configuration The default setting for all ports is trust-d evice none .
55-38 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Using SmartPorts (*)Runtime trust type set to untrusted. Config: Port ACL name Type ----- -------------------------------- ---- No ACL is mapped to port 4/1.
55-39 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Using SmartPorts When you ex ecute the ciscoipphone ke yword on a port, in additio n to the pre vious features, these features are also implemented: • The specified auxiliary VLAN is associated with the port.
55-40 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Using SmartPorts SmartPorts Guidelines and Restrictions These sections pr.
55-41 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Using SmartPorts CLI Interface for SmartPorts These sections describe the.
55-42 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Using SmartPorts All ingress and egress QoS scheduling parameters configured on all ports. CoS to DSCP, DSCP to COS, IP Precedence to DSCP and policed dscp maps configured.
55-43 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Using SmartPorts ciscoipphone Macro Statement The ciscoipphone macro comm.
55-44 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Using SmartPorts SmartPorts Enhancements in Software Release 8.4(1) These sections describe the SmartPorts en hancements in software release 8.
55-45 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Using SmartPorts Ciscoswitch SmartPorts Template The ciscoswitch interface macro command results in the foll o wing conf iguration: Note Specifying the native vlan is required.
55-46 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Using SmartPorts Ciscoipphone SmartPorts Template The ciscoipphone interface macr o command results in the fol lo wing conf iguration: Note Specifying the vlan ( nativevl an) is required.
55-47 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Using SmartPorts Global SmartPorts Template The ciscosmartports global ma.
55-48 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Using SmartPorts • Clearing (deleting) a macro—Y ou can clear a macro when it is no long er n eeded.
55-49 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Using SmartPorts • In the abov e example, $D A T A VLAN and $A UXVL AN are variables and are substituted with appropriate values when the macro is applied to a port.
55-50 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Using SmartPorts In the abov e examples, $CDPV ER is a global v ariable and $D A T A VLAN and $A UXVLAN are per-port v ariables.
55-51 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Using SmartPorts Variable AUXVLAN successfully created Console> (enabl.
55-52 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Using SmartPorts Displaying Macros This section descri bes the v arious m.
55-53 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Using SmartPorts • Display an indi vidual macro vari able and all of th.
55-54 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Using SmartPorts • Clear all macros and their variables b y entering the clear macr o all command as follo ws: Console> (enable) clear macro all Clearing all macros.
55-55 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configuring a VoIP Networ k Using SmartPorts • Display the macro port mappings for a specif ic port.
55-56 Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7 OL-8978-02 Chapter 55 Configur ing a VoIP Network Using SmartPorts.
An important point after buying a device Cisco Systems OL-8978-02 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems OL-8978-02 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems OL-8978-02 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems OL-8978-02 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems OL-8978-02 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems OL-8978-02, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems OL-8978-02.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems OL-8978-02. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems OL-8978-02 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
