Instruction/ maintenance manual of the product SANTO C 7 18 41 I AEG
Go to page of 14
SANT O C 7 18 4 1 i Integrating Fridge Fr eezer Operating and Installation Instructions AEG Hausgeräte GmbH P ostfach 1036 D-90327 Nürnberg http://www .
2 Dear cu stomer , Before placing your new refriger ator/freezer into operation please r ead the- se oper ating instructions carefully . They contain important information for safe use, for installation and for car e of the appliance. Please keep these operating instructions for future refer ence.
3 Contents Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Dis posal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Appliance Packaging Information .
4 Safety Please r ead this instruction book before using the appliance and r etain for future refer ence. These warnings are provided in the interests of your safe- ty , ensure you understand them fully before using the appliance. Intended u se • The appliance is intended for use in the home.
5 Daily Oper ation • Containers with flammable gases or liquids can leak at low temper atures. There is a risk of an explosion! Do not store any container s with flamma- ble materials such as, spray cans, fire extinguisher refill cartridges etc in the refrigerator/freezer .
6 Remove tr ansport packaging The appliance and the interior fittings ar e protected for transport. • Remove all adhesive tape and packing pieces from the interior of the appliance. Disposal of old Appliances For environmental reasons, refriger ation appliances must be disposed of properly .
7 Starting up and temperatur e regulation Wash the inside of the appliance with lukewarm water with a little bicar- bonate of soda added (5ml to 0,5 litre of water). Do not use soap or deter- gent as the smell may linger . Dry the appliance thor oughly .
8 Interior Accessories Storage Shelves The glass shelf above the fruit and vegetable compartment should always remain in position, to ensur e fruit and vegetables stay fr esh longer . The remaining storage shelves can be adjusted to various heights: Pull the storage shelf forwar d until it can be tipped up or down and remo- ved.
9 wapped in aluminium foil or polythene bags to exclude as much air as pos- sible. Milk bottles: these should have a cap and should be stored in the bottle rack on the door . Bananas, potatoes, onion s and garlic, if not in airtight containers, must not be kept in the refrigerator .
10 1. Place the packed food in the drawer s. Place food to be frozen in the upper drawer . Unfrozen food must not touch items already fr ozen, otherwise the frozen food could begin to defrost. 2. When freezing fresh food, depress the ambient temperatur e switch (A) 12 hours before loading the food without modifying the thermostat setting.
Storage Goods Symbols/Freezing Calendar • The symbols on the drawers show different types of frozen goods. • The numbers indicate stor age times in months for the appropriate types of fr ozen goods. Whether the upper or lower value of the indicated sto- rage time is valid depends on the quality of the foods and pre-tr eating before freezing.
12 4. Insert the plastic scraper into the recess provided under the defr ost water channel and place a collecting basin under it. 5. Once defrosting is completed keep the scraper handy for future use; 6. Turn the thermostat knob to the requir ed setting or r eplace the plug in the power socket.
• The appliance must be dry befor e it is placed back into service. Warning! • Ethereal oils and organic solvents can attack plastic parts, e.g. – lemon juice or the juice fr om orange peel, – butyric acid; – cleansers which contain acetic acid.
14 Heavy build up of frost, possi- bly also on the door seal. Door seal is not air tight (pos- sibly after r eversing the door). Carefully warm the leaking sections of the door seal with a hair dryer (not hotter than approx. 50 °C). At the same time shape the warmed door seal by hand until it sits cor- rectly .
An important point after buying a device AEG SANTO C 7 18 41 I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AEG SANTO C 7 18 41 I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AEG SANTO C 7 18 41 I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AEG SANTO C 7 18 41 I you will learn all the available features of the product, as well as information on its operation. The information that you get AEG SANTO C 7 18 41 I will certainly help you make a decision on the purchase.
If you already are a holder of AEG SANTO C 7 18 41 I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AEG SANTO C 7 18 41 I.
However, one of the most important roles played by the user manual is to help in solving problems with AEG SANTO C 7 18 41 I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AEG SANTO C 7 18 41 I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
