Instruction/ maintenance manual of the product ESR-PRE2 Cisco Systems
Go to page of 2
Corporate Headquarters Cisco Systems, Inc. 170 W est T asman Drive San Jose, CA 95134-1706 USA http://www .cisco.com T el: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Copyright © 2004 Cisco Systems, Inc. All rights reserved. Cisco, Cisco IOS, Cisco Systems, and the Cisco Systems logo are registere d trademarks of Cisco Systems, Inc.
Figure 1 Cisco uBR1 0 0 12 Router Figur e 2 Cisco ESR1 0 00 0 Router Step 5 Simultaneously close the ejector levers to firmly seat the PRE2 in the backpla ne. Step 6 Tighten the captive screws. Step 7 Reconnect al l the cables to the PRE2 and connect to the console.
An important point after buying a device Cisco Systems ESR-PRE2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems ESR-PRE2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems ESR-PRE2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems ESR-PRE2 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems ESR-PRE2 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems ESR-PRE2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems ESR-PRE2.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems ESR-PRE2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems ESR-PRE2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
