Instruction/ maintenance manual of the product CE-100T-8 Cisco Systems
Go to page of 10
CH A P T E R 16-1 Cisco ONS 15310-CL Ethernet Card Softwar e Feature and Configuration Guide, R5.0 June 2005 16 CE-100T-8 Ethernet Operation This chapter cov ers the operation of the CE-100T -8 (Carrier Ethernet) card supported on the ONS 15310 (15310-CE-100T -8).
16-2 Cisco ONS 15310-CL Ethernet Card Software Feature and Configuration Guide, R5.0 June 2005 Chapter 16 CE-1 00T -8 Ethern et Operatio n CE-100T-8 Ethernet Features The CE-100T -8 card supports ITU-T G.707 and T elcordi a GR-253 based standards f or SONET .
16-3 Cisco ONS 15310-CL Ethernet Card Softwar e Feature and Configuration Guide, R5.0 June 2005 Chapter 16 CE-100T-8 Et hernet Operation CE-100T-8 Ethernet Features The CE-100T -8 card has symmetric flo w control and proposes symmetric flo w control when autone gotiating flo w control with attached Ethernet de vices.
16-4 Cisco ONS 15310-CL Ethernet Card Software Feature and Configuration Guide, R5.0 June 2005 Chapter 16 CE-1 00T -8 Ethern et Operatio n CE-100T-8 Ethernet Features Note Some network de vices can be conf igured to ignore a l oss of carrier condition.
16-5 Cisco ONS 15310-CL Ethernet Card Softwar e Feature and Configuration Guide, R5.0 June 2005 Chapter 16 CE-100T-8 Et hernet Operation CE-100T-8 Ethernet Features Ethernet frames without VLAN tagging use T oS-based priority queueing if both T oS and CoS priority queueing is activ e on the card.
16-6 Cisco ONS 15310-CL Ethernet Card Software Feature and Configuration Guide, R5.0 June 2005 Chapter 16 CE-1 00T -8 Ethern et Operatio n CE-100T-8 SONET Circuits and Features Statistics and Counters The CE-100T -8 has a full range of Ethernet and POS statist i cs under P erformance > Ether Ports or Perf ormance > POS Ports .
16-7 Cisco ONS 15310-CL Ethernet Card Softwar e Feature and Configuration Guide, R5.0 June 2005 Chapter 16 CE-100T-8 Et hernet Operation CE-100T-8 SONET Circuits and Feature s The CE-100T -8 supports up to eight lo w order VCA T circuits. The a vailable circuit sizes are V T1.
16-8 Cisco ONS 15310-CL Ethernet Card Software Feature and Configuration Guide, R5.0 June 2005 Chapter 16 CE-1 00T -8 Ethern et Operatio n CE-100T-8 SONET Circuits and Features CE-100T-8 STS/VT Allocation Tab The CE-100T -8 has two pools, eac h with a maximum capa city of three STSs.
16-9 Cisco ONS 15310-CL Ethernet Card Softwar e Feature and Configuration Guide, R5.0 June 2005 Chapter 16 CE-100T-8 Et hernet Operation CE-100T-8 SONET Circuits and Feature s CE-100T-8 VCAT Character.
16-10 Cisco ONS 15310-CL Ethernet Card Software Feature and Configuration Guide, R5.0 June 2005 Chapter 16 CE-1 00T -8 Ethern et Operatio n CE-100T-8 SONET Circuits and Features The CE-100T -8 card supports GFP-F null mode. GFP-F CMFs are counted and discarded.
An important point after buying a device Cisco Systems CE-100T-8 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems CE-100T-8 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems CE-100T-8 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems CE-100T-8 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems CE-100T-8 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems CE-100T-8, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems CE-100T-8.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems CE-100T-8. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems CE-100T-8 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
