Instruction/ maintenance manual of the product CAB-232MT Cisco Systems
Go to page of 5
CAB−232MT and CAB−232FC EIA/TIA−232 Serial Cable Specifications Document ID: 46800 Introduction Prerequisites Requirements Components Used Conventions EIA/TIA−232 Speed and Distance Limitation.
2400 200 60 4800 100 30 9600 50 15 19200 50 15 38400 50 15 57600 25 7.6 115200 12 3.7 Serial Cable CAB−232MT This section presents the cable assembly and pinouts for the CAB−232MT serial cable.
J1−51 J1−52 GND MODE_DCE J1−46 Shield GND Single − J2−1 Shield GND J1−41 Shield TxD/RxD − Twisted pair no. 5 −−−> − J2−2 Shield TxD − J1−36 Shield RxD/TxD − Twisted pair no. 9 <−−− − J2−3 Shield RxD − J1−42 Shield RTS/CTS − Twisted pair no.
Serial Cable CAB−232FC This section presents the cable assembly and pinouts for the CAB−232FC serial cable. The cable gender for this product (part number 72−0794−01) is Male DB−60 to Female DB−25, mode − DCE.
Shield − Twisted pair no. 2 − Shield − J1−39 Shield TxCE/TxC − Twisted pair no. 7 −−−> − J2−15 Shield TxC − J1−40 Shield NIL/RxC − Twisted pair no. 6 −−−> − J2−17 Shield RxC − J1−33 Shield DCD/LL − Twisted pair no.
An important point after buying a device Cisco Systems CAB-232MT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems CAB-232MT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems CAB-232MT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems CAB-232MT you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems CAB-232MT will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems CAB-232MT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems CAB-232MT.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems CAB-232MT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems CAB-232MT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
