Instruction/ maintenance manual of the product S 75428 DT AEG
Go to page of 20
SANTO 75428 DT User manual Fridge-Freezer.
Thank you for choosing on e of our high-quality prod ucts. To ensure optimal and regula r performanc e of your appliance please read this instruction manual carefully.
For the safety of life and property keep the precautions of these user's inst ructions as the manufacturer is not responsible for damages caused by omission.
• It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-cir cuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, co mpressor) must be replaced by a certified service agent or qualified service personnel.
• Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages im mediately to the place you bought it. In that case retain packing. • It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor.
Temperat ure regulat ion The temperature is automatically regulated. To operate the appliance, proc eed as follows: • press the temperature regulator more time s until the LED correspon ding to the required temperature lights up. Selection is prog ressive, varying fr om +2°C to +8°C .
Daily use Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can b e posi - tioned as desired. Bottle rack Place the bottles (with th e opening facing front) in the pre-positioned shelf. If the shelf is positioned horizontally, place only closed bottles.
To regulate the humidity in th e vegetable drawer the glass shelf incorporates a device with slits (ad - justable by means of a sliding lever). When the ventilation slots are closed: the natural moisture cont ent of the food in the fruit and vegetable compartments is preserv ed for longer.
It consists of a double tray ice dispenser and of an ice box. It is possible to shift th e Ice Dispenser on left or on right according to your space needs.
Thawing Deep-frozen or frozen food, prior to being us ed, can be thawed in the refrigerator com - partment or at room temperatur e, dependin g on the time available for this operation. Small pieces may even be cooked still frozen, di rectly from the freezer: in this case, cooking will take longer.
• do not allow fresh, unfrozen food to touch food which is already frozen, thus avoidin g a rise in temperature of th e latter; • lean foods store better and longer than fatty ones; salt reduces t.
Defrosting of the refrigerator Frost is automatically eliminated from the evaporator of the refrigerator comp artment every time the mo tor compressor stops, during normal use. The defrost water drains out through a trough into a special container at the back of the appliance, over the motor compressor, where it evaporates.
Problem Possible cause Solution The appliance does not operate. The la mp does not operate. The appliance is switched off. Switch on the appl iance. The mains plug is not connect ed to the mains socket corr ectly. Connect the mains plug to the mains socket correctly.
Problem Possible cause Solution The temperature in the refrigerator is too high. There is no cold air circulat ion in the appliance. Make sure that there is cold air circulation in the appliance. The temperature in the freezer is too high. Products are too near to each other.
Installation WARNING! Read the "Safety Information" carefully for your safety and correct operation of the ap - pliance before installing the appliance.
Electrical connection Before plugging in, ensure that the voltage and frequency shown on the rating plate cor - respond to your do mestic power supply. The appliance must be earthed. The power supply cable plug is provide d with a contact for this purpose.
1. Remove the upper hinge taking care for the upper door not to fall off and keep it for future actions. 2. Remove the upper door. 3. Remove the upper support and install it in the opposite side.
10. Install the lower hinge in the opposite side, using the screws previously re - moved. 11. Carefully replace the appliance in its working position and adjust the level of the appliance by screwing / unscr ewing the adjustable feet at the bottom of the cabinet using your fingers or a tool.
• The door opens and closes corr ectly. If the ambient temperature is cold (i.e. in Wi nter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket. In case you do not want to carry out the ab ove mentioned operations, conta ct the nearest After Sales Service Force.
www.electrolux.com 212710122-00-030 92009.
An important point after buying a device AEG S 75428 DT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AEG S 75428 DT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AEG S 75428 DT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AEG S 75428 DT you will learn all the available features of the product, as well as information on its operation. The information that you get AEG S 75428 DT will certainly help you make a decision on the purchase.
If you already are a holder of AEG S 75428 DT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AEG S 75428 DT.
However, one of the most important roles played by the user manual is to help in solving problems with AEG S 75428 DT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AEG S 75428 DT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center