Instruction/ maintenance manual of the product 6503 Cisco Systems
Go to page of 19
Cisco Systems, Inc. All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Pri vac y Statement. Page 1 of 19 White P aper High A vailability for the C.
Cisco Systems, Inc. All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Pri vac y Statement. Page 2 of 19 redundancy . For more detail on high-a vailability network designs, refer to the white paper , Gigabit Campus Design , at: http://www .
Cisco Systems, Inc. All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Pri vac y Statement. Page 3 of 19 The changes to the switching mode are done automatically , depending on the hardware installed.
Cisco Systems, Inc. All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Pri vac y Statement. Page 4 of 19 Example 2: Classic and Fabric-Enabled Sys.
Cisco Systems, Inc. All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Pri vac y Statement. Page 5 of 19 Redundant Supervisor Engines As previousl.
Cisco Systems, Inc. All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Pri vac y Statement. Page 6 of 19 disabling port channels (PagP), and turning trunking of f for ports to which workstations are directly attached, the fast switchov er time can be reduced to approximately 10 seconds.
Cisco Systems, Inc. All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Pri vac y Statement. Page 7 of 19 T able 1 shows protocols and features for high a v ailability as of Cisco Catalyst OS version 7.
Cisco Systems, Inc. All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Pri vac y Statement. Page 8 of 19 Both supervisor engines run a synchronizing operation to allow for transfer of this data.
Cisco Systems, Inc. All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Pri vac y Statement. Page 9 of 19 The image synchronization feature of Cisc.
Cisco Systems, Inc. All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Pri vac y Statement. Page 10 of 19 http://www .
Cisco Systems, Inc. All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Pri vac y Statement. Page 11 of 19 10.
Cisco Systems, Inc. All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Pri vac y Statement. Page 12 of 19 Dual Router Mode DRM is the original MSFC configuration for redundant supervisor engine or MSFC configurations.
Cisco Systems, Inc. All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Pri vac y Statement. Page 13 of 19 The following commands enable MSFC con.
Cisco Systems, Inc. All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Pri vac y Statement. Page 14 of 19 For these scenarios, SRM is no w av ailable.
Cisco Systems, Inc. All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Pri vac y Statement. Page 15 of 19 The same IP and Media Access Control (MA C) addresses are used for the designated router , whether or not the MSFC is the designated router .
Cisco Systems, Inc. All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Pri vac y Statement. Page 16 of 19 SRM and IP Multicast W ith SRM, the VLAN interfaces on the nondesignated router are in a down state.
Cisco Systems, Inc. All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Pri vac y Statement. Page 17 of 19 DRM hostname DRM ! redundancy high-availability config-sync ! interface Vlan20 ip address 10.
Cisco Systems, Inc. All contents are Copyright © 1992–2002 Cisco Systems, Inc. All rights reserved. Important Notices and Pri vac y Statement. Page 18 of 19 disabled, the power a v ailable to the system is the combined power of the po wer supplies.
Corporate Headquarters Cisco Systems, Inc. 170 W est T asman Drive San Jose, CA 95134-1706 USA www .cisco.com T el: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 European Headquarters Cisco Systems International BV Haarlerbergpark Haarlerbergweg 13-19 1101 CH Amsterdam The Netherlands www-europe.
An important point after buying a device Cisco Systems 6503 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems 6503 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems 6503 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems 6503 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems 6503 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems 6503, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems 6503.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems 6503. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems 6503 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
