Instruction/ maintenance manual of the product 5505 Cisco Systems
Go to page of 14
4-1 ASA 5505 Getting Started Guide 78-18003-02 CH A P T E R 4 Installing the ASA 5505 This chapter describes ho w to install the ASA 5505 ad aptiv e security appliance.
Chapter 4 Installing the ASA 5505 Verifying the Package Contents 4-2 ASA 5505 Getting Started Guide 78-18003-02 Figure 4-1 Contents of A SA 5505 Pac kage Cisco ASA 5505 Getting Started Guide Regulator.
4-3 ASA 5505 Getting Started Guide 78-18003-02 Chapter 4 Installing the ASA 5505 PoE Ports and Devices PoE Ports and Devices On the ASA 5505, switch ports Ethernet 0/6 and Ethernet 0/7 support PoE de vices that are compliant with the IEEE 802.3af st andard, such as IP phones and wireless access points.
Chapter 4 Installing the ASA 5505 Connecting to Netw ork Interfaces 4-4 ASA 5505 Getting Started Guide 78-18003-02 b. Use one of the yellow Ethernet cab les to connect th e device to a cable/DSL/ISDN modem. Note By default, swit ch port 0 is the outside p ort.
4-5 ASA 5505 Getting Started Guide 78-18003-02 Chapter 4 Installing the ASA 5505 Powering on the ASA 5505 Figure 4-2 Connecting to an Ether net Interface Step 3 Connect the other end of the Et hernet cable to a device, such as a router , des ktop computer , or printer .
Chapter 4 Installing the ASA 5505 Setting Up a PC for System Administration 4-6 ASA 5505 Getting Started Guide 78-18003-02 Note The ASA 5505 does not have a po wer switch. Completing Step 3 powers on the device. Step 4 Check the po wer LED; if it is solid green, then the device is po wered on.
4-7 ASA 5505 Getting Started Guide 78-18003-02 Chapter 4 Installing the ASA 5505 Optional Procedures When you connect other de vices to any of the i nside ports, make sure that they do not hav e the same IP address. Note The MGMT interface of the adaptive security appliance is assigned 192.
Chapter 4 Installing the ASA 5505 Optional Procedures 4-8 ASA 5505 Getting Started Guide 78-18003-02 Figure 4-3 Connecting to the Console T o connect a console for local, command-l ine administrative access, perform the follo wing steps: Step 1 Plug one end of the P C t er mi na l a da pt er into a standard 9-pin PC serial port on your PC.
4-9 ASA 5505 Getting Started Guide 78-18003-02 Chapter 4 Installing the ASA 5505 Ports and LEDs T o install a cab le lock, perform the follo wing steps: Step 1 Follo w the directions from th e manufacturer for attaching the oth er end of the cable for securing the adap tive security appliance.
Chapter 4 Installing the ASA 5505 Ports and LEDs 4-10 ASA 5505 Getting Started Guide 78-18003-02 Figure 4-4 illu strates the front panel of the ASA 5505.
4-11 ASA 5505 Getting Started Guide 78-18003-02 Chapter 4 Installing the ASA 5505 Ports and LEDs * If the LINK/ACT LED does not light up, the link could be down if there is a duplex mismatch. You can fix the problem by changing the settings either on the ASA 5505 or on th e other end.
Chapter 4 Installing the ASA 5505 Ports and LEDs 4-12 ASA 5505 Getting Started Guide 78-18003-02 Rear Panel Components Figure 4-5 illustrates the b ack panel of the ASA 5505.
4-13 ASA 5505 Getting Started Guide 78-18003-02 Chapter 4 Installing the ASA 5505 What to Do Next What to Do Next Continue with Chapter 5, “Confi guring the Ad aptiv e Se curity Appliance. ” 6 2 USB ports v2.0 ports Reserved for future use. 7 Ethernet switch ports 0 –7 Layer 2 switch ports t hat provide fle xible VLAN configuratio n.
Chapter 4 Installing the ASA 5505 What to Do Next 4-14 ASA 5505 Getting Started Guide 78-18003-02.
An important point after buying a device Cisco Systems 5505 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems 5505 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems 5505 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems 5505 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems 5505 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems 5505, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems 5505.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems 5505. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems 5505 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
