Instruction/ maintenance manual of the product 4013371 Cisco Systems
Go to page of 126
August 2006 DPR2325, EPR2325, DPR2320, and EPR2320 Cable Modem Gateway with Wireless Access Point User's Guide In This Document IMPORTANT SAFETY INFORMATION ............................................................... 3 FCC Compliance .
2 4011533 Rev A How Do I Configure the Cable Modem Gateway? ............................................. 43 Having Difficulty? .................................................................................................. 112 Tips for Improved Performance .
4011533 Rev A 3 IMPORTANT SAFETY INFORMATION IMPORTANT SAFETY INFORMATION Notice to Installers The servicing instructions in this notice are for use by qualified serv ice personnel only.
4 4011533 Rev A IMPORTANT SAFETY INFORMATION Mitteilung für CA TV -T echniker Die in dieser Mitteilung aufgeführten Wa rtungsanweisungen sind ausschließlich für qualifizierte s Fachpersonal bestimmt .
4011533 Rev A 5 IMPORTANT SAFETY INFORMATION Heed All W arnings Adhere to all warnin gs on the product a nd in the operat ing instructions. Read, Retain, and Follo w These Instructions Carefully read all safety and operating instructio ns before operating this product.
6 4011533 Rev A IMPORTANT SAFETY INFORMATION Note: If you are unable to insert this plug fully into the outlet, try reversing the plug. The wide blade is provided for your safety. If the plug still fails to fit, contact an electrician to replace your obsolete outlet.
4011533 Rev A 7 IMPORTANT SAFETY INFORMATION Selecting a Proper Location WARNING: Avoid personal injury and damage to this pr oduct! An unstable surface may cause this product to f all. Place this pro duct on a sta ble surface. T he surface must support the si ze and w eight of this product.
8 4011533 Rev A IMPORTANT SAFETY INFORMATION Service W arnings Servicing This Product WARNING: Avoid electric shock! Opening or r emoving the cov er may expose you to dangerous voltages. Th is product contains no user-serviceable parts. Refer al l servicing to qualif ied service personn el.
4011533 Rev A 9 FCC Compliance FCC Compliance United States FCC Compliance This device has been test ed and found t o comply with the lim its for a Class B digit al device, pursuant to part 15 of the FCC Ru les. Thes e limit s are designed to p rovide reasonable protection against such int erference in a resi dential installation.
10 4011533 Rev A Introduction Introduction Welcome to the exciting world of home and office networking. Your new DPR2325, EPR2325, DPR2320, or EPR2320 Cable Modem G a teway allows several users to share one high-speed broadband connection across mu ltiple PCs, laptops, digital cameras, personal data assistants (PDAs), and Internet devices.
4011533 Rev A 11 Introduction Allows automatic software upgrades by your service provider Assures a broad range of interoperab ility with most service providers by complying with Data Over Cable System Interface Specifications (DOCSIS) 1.0, 1.
12 4011533 Rev A What's In the Carton? What's In the Carton? When you receive your cable modem gatewa y, you should check the equipment and accessories to verify that each item is in the carton and that e ach item is undamaged.
4011533 Rev A 13 DPR2320 and EPR2320 Front Panel Description DPR2320 and EPR2320 Front Panel Description The front panel of your cable modem gatewa y provides LED status indicators that indicate how well and at what state your cable modem gateway is operating.
14 4011533 Rev A DPR2320 and EPR2320 Back Panel Description DPR2320 and EPR2320 Back Panel Description The following illustration shows the descri ption and function of the back panel components of the DPR2320 and EPR 2320. Important! Do not connect your PC to both the Ethernet and USB ports at the same time.
4011533 Rev A 15 DPR2325 and EPR2325 Front Panel Description DPR2325 and EPR2325 Front Panel Description The front panel of your cable modem gatewa y provides LED status indicators that indicate how well and at what state your cable modem gateway is operating.
16 4011533 Rev A DPR2325 and EPR2325 Back Panel Description DPR2325 and EPR2325 Back Panel Description The following illustration shows the descri ption and function of the back panel components of the DPR2325 and EPR 2325. Important! Do not connect your PC to both the Ethernet and USB ports at the same time.
4011533 Rev A 17 Where Is the Best Location for My Cable M odem Gatewa y ? Where Is the Best Location for My Cable Modem Gateway? The ideal location for your cable modem gateway is where it has access t o outlets and other devices.
18 4011533 Rev A What Are the System Require me nts for Internet Service? What Are the System Requirements for Internet Service? To ensure that your cable modem gatewa y operates efficiently for high-.
4011533 Rev A 19 How Do I Set Up My High-Speed Internet Access A ccount? How Do I Set Up My High-Speed Internet Access Account? Before you can use your cable modem gateway, you need to have a high-speed Internet access account. If you do not have a high-speed Inte rnet access account, you need to set up an account with your local service provider.
20 4011533 Rev A How Do I Set Up My High-Speed Internet Access Account? I Already Have an Existing Hi gh-Speed Internet Access Account If you have an existing high-speed Internet access account, you must give your service provider the serial number and the MAC addresses of the cable modem gateway.
4011533 Rev A 21 How Do I Connect My Devices to Use the Inter net? How Do I Connect My Devices to Use the Internet? You can use your cable modem gateway to access the Internet, and you can sh are that Internet connection with other Internet devices in your home or office.
22 4011533 Rev A How Do I Connect My Devices to Use the Inter net? Connecting the Modem for Hi gh-Speed Data Service WARNING: To avoid personal inju ry or damage to your equipm ent, follow these steps in the exact order shown. 1 Power off your PC and unplug it from the power source.
4011533 Rev A 23 How Do I Configure T CP/IP Protocol? How Do I Configure TCP/IP Protocol? To configure TCP/IP protocol, you need to have an Ethernet Network Interface Card (NIC) with TCP/IP communications protocol installed on your system. TCP/IP is a communications protocol used to access the Internet.
24 4011533 Rev A How Do I Configure T CP/IP Protocol? Configuring TCP/IP on Windows 2000 Systems 1 Click Start , select Settings , and choose Network and Dial-up Connections . 2 Double-click the Local Area Connection icon in the Network and Dial-up Connections window.
4011533 Rev A 25 How Do I Configure T CP/IP Protocol? Configuring TCP/IP on Macintosh Systems 1 Click the Apple icon in the upper-left corner of the Finder. Scroll down to Control Panels , and then click TCP/IP . 2 Click Edit on the Finder at the top of the screen.
26 4011533 Rev A How Do I Install USB Drivers? How Do I Install USB Drivers? To install USB drivers, your PC must be equipped with a USB network interface and a Microsoft Windows 98SE, ME, 2000, or XP operating system. This section contains instructions for installing the USB dr ivers for the cable modem gateway.
4011533 Rev A 27 How Do I Install USB Drivers? 6 Click Next in the Found New Hardware Wizard window. The system searches for the driver file for your hardware device. 7 After the system finds the USB driver, the Digital Signature Not Found window opens and displays a confirmation message to c ontinue the installation.
28 4011533 Rev A What Are the Requirements fo r Ethernet Network Devices? What Are the Requirements for Ethernet Network Devices? How Many Ethernet Networ k Devices Can I Connect? The Scientific Atlanta cable modem gatewa y can support several Ethernet network devices using external Ethernet hubs that must be purchased separately.
4011533 Rev A 29 How Do I Select and Place Ethernet Network Devices? How Do I Select and Place Ethernet Network Devices? You can use a large variety of Ethernet network devices with your cable modem gateway. These include NIC cards, hubs, bri dges, etc.
30 4011533 Rev A How Do I Connect Ethe rnet Network Devices? How Do I Connect Ethernet Network Devices? Connecting Ethernet Devices You must connect your Ethernet devices for use with the cable modem gateway. Professional installation may be available.
4011533 Rev A 31 How Do I Connect Ethernet Network Devices? WARNING: Hazardous electr ical voltages c an be present on any connect ed wiring. Ethernet wiri ng and connections must b e properly insulated to prevent electrical shock. Disconn ect power from the c able modem gateway bef ore attempting to connect to any device.
32 4011533 Rev A What Are the Requirements for USB Network Devices? What Are the Requirements for USB Network Devices? How Many USB Devices Can I Connect? Contact your service provider for more information on the maximum number of USB network devices to connect to the cable modem gateway to maintain optimal network performance.
4011533 Rev A 33 How Do I Select and Place USB Network Devices? How Do I Select and Place USB Network Devices? You can use a large variety of USB network devices with your cable modem gateway. These include desktop computers, laptop computers, devices with USB ports, and USB adapters.
34 4011533 Rev A How Do I Connect USB Network Devices? How Do I Connect USB Network Devices? Connecting USB Devices You must connect your USB devices for use with your cable modem gateway. Professional installation may be available. Contact your local service provider for further assistance.
4011533 Rev A 35 How Do I Connect USB Network Devices? WARNING: Hazardous electr ical voltages c an be present on any connect ed wiring. USB wiring and c onnections must b e properly insulated to pr event ele ctrical shock. Disconnect power from the cable modem gatew ay before attempting to connect to any device.
36 4011533 Rev A How Do I Troubleshoot My Internet Service Ins tallation? How Do I Troubleshoot My Internet Service Installation? I cannot connect to the Internet Verify that the plug to your cable modem gateway AC power is properly inserted into an electrical outlet.
4011533 Rev A 37 How Do I Troubleshoot My Internet Service Installati on? My cable modem gateway does no t register a cable connection The cable modem gateway works with a standard, 75-ohm, RF coaxial cable. If you are using a different cable, your cable modem gateway will not function properly.
38 4011533 Rev A How Do I Troubleshoot My Internet Service Ins tallation? How Do I Renew the IP Address on My PC? If your PC cannot access the Internet after the cable modem gateway is online, it is possible that your PC did not renew it s IP address.
4011533 Rev A 39 What Are the Requirements for Wireless Network Devices? What Are the Requirements for Wireless Network Devices? How Many Wireless D evices Can I Connect? The DPR2325 serves as a wireless access point (WAP). The WAP on the D PR2325 provides wireless network service to mult iple wireless network devices.
40 4011533 Rev A How Do I Select and Place Wireless Network Devices? How Do I Select and Place Wireless Network Devices? You can use a large variety of wireless network devices with your cable modem gateway.
4011533 Rev A 41 How Do I Install Wireless Network Devices? How Do I Install Wireless Network Devices? Installing Wireless Network Devices You must install wireless network devices for use with your cable modem gateway. Professional installation may be available.
42 4011533 Rev A How Do I Install Wireless Network Devices? To install wireless network devices WARNING: Hazardous electr ical voltages c an be present on any connect ed wiring. Ethernet wiri ng and connections must b e properly insulated to prevent electrical shock.
4011533 Rev A 43 How Do I Configure t he Cable Modem Ga tewa y ? How Do I Configure the Cable Modem Gateway? To configure your cable modem gateway, you must first access the WebWizard configuration pages.
44 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? About Y our Modem Page Example The following illustration is an example of the About Your Modem page. About Y our Modem Page Description The following table provides a descriptio n of each field within the About Your Modem page.
4011533 Rev A 45 How Do I Configure t he Cable Modem Ga tewa y ? Field Name Description Cable Modem Status Lists one of the follow ing possible current states of the modem: other notReady .
46 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Setting Configuration Options Click the Setup tab located in the upper portion of the About Your Modem screen to access the Setup page. Use the Setup page to ac cess the various configuration options for the cable modem gateway.
4011533 Rev A 47 How Do I Configure t he Cable Modem Ga tewa y ? Setup Page Section Headings The Setup page is divided into the following section headings: Basic Settings Advanced Settings .
48 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Advanced Settings The following table provides a description of the pages available from within the Advanced Settings section of the Setup page.
4011533 Rev A 49 How Do I Configure t he Cable Modem Ga tewa y ? Field Name Description DMZ Host (Demilitarized Zone) Use this page to configure an IP address that is visible to the wide area network (WAN).
50 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Field Name Description Save Configuration to Server Allows the user with network administrator access to save the configu ration profile of th e gateway to a TFTP server in the network.
4011533 Rev A 51 How Do I Configure t he Cable Modem Ga tewa y ? Virus Protection The following table provides a description of the pages available from within the Virus Protection section of the Setup page.
52 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Configuring Y our Password Settings Use the Basic Settings - Password Settings page to set up a password to restrict unauthorized persons from accessing to your cable modem gateway settings.
4011533 Rev A 53 How Do I Configure t he Cable Modem Ga tewa y ? To set up your password To set up your password, type your password in the Password field, and then re-type your password in the Re-E nter Password field. Then, click Apply to save your password.
54 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Setup Basic Settings - Enable/Dis able Time Synchronization by Network T ime Protocol Page Example The following illustration is an example of the Basic Settings Enable/Disable time synchronization by Network Time protocol page.
4011533 Rev A 55 How Do I Configure t he Cable Modem Ga tewa y ? Setup Basic Settings - Enable/Dis able Time Synchronization by Network T ime Protocol Page Description The following table provides a description of the fields within the Basic Settings Enable/Disable time synchronization by Network Time protocol page.
56 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Configuring the Default Network Settings You can use the default network settings, or if your system requires different settings to operate correctly, you can change the default network setting s using the Setup Basic Settings - Network Configuration page.
4011533 Rev A 57 How Do I Configure t he Cable Modem Ga tewa y ? Setup Basic Settings - Network Configuration Page Example The following illustration is an example of the Setup Basic Settings - Network Configuration page.
58 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Setup Basic Settings - Network Co nfiguration Page Description The following table provides a descriptio n of the fields within the Setup Basic Settings - Network Configuration page.
4011533 Rev A 59 How Do I Configure t he Cable Modem Ga tewa y ? Field Name Description Static IP Mask Manual entry is re quired. Your ISP wi ll provide the information for you to enter into this field. Default Gateway Manual entry is required, your ISP w ill provide the information for you to enter into this field.
60 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Setup Basic Settings - IP Management Page Example The following illustration is an example of the Setup Basic Settings - IP Management page.
4011533 Rev A 61 How Do I Configure t he Cable Modem Ga tewa y ? Setup Basic Settings - IP Management Page Description The following tables provide a descriptio n of the fields within the Setup Basic Settings - IP Management page.
62 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Reserving IP Addresses Use the Setup Basic Settings - Fixed CPE IP Assignment pag e to reserve IP addresses. This feature allows you to assign a fixed IP address to any device in your network by setting static IP addresses in your PC or other network device.
4011533 Rev A 63 How Do I Configure t he Cable Modem Ga tewa y ? Setup Basic Settings - Fixed CPE IP Assignment Page Example The following illustration is an example of the Setup Basic Settings - Fixed CPE IP Assignment page.
64 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Function Keys Key Description Add Static IP Adds the Static IP ad dress to the list of assigned IP addresses Remove Stati c IP Removes th.
4011533 Rev A 65 How Do I Configure t he Cable Modem Ga tewa y ? Saving Y our Configuration Use the Setup Basic Settings - Save RG Config uration to Local PC page to save your current cable modem gateway configuration to the hard drive on your PC or to a floppy disk.
66 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Enabling and Disablin g Advanced Features Use the Setup Advanced Settings - Options page to enable or disable advanced features on your network. When the wirele ss interface is disabled, the transmitter is turned off.
4011533 Rev A 67 How Do I Configure t he Cable Modem Ga tewa y ? Field Name Description WAN Blocking Checking this box prevents the cable modem gateway from being visible to the WAN.
68 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Configuring IP Address Filters Use the Setup Advanced Settings - IP Filterin g page to configure IP address filters. These filters block a range of IP ad dresses from accessing the Interne t.
4011533 Rev A 69 How Do I Configure t he Cable Modem Ga teway? Setup Advanced Settings - IP Filtering Page Description Use this page to specify and enable a range of IP addresses that cannot have access to the Internet. Click Apply to apply and save your new IP address filter settings.
70 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Setup Advanced Settings - MA C Filtering Page Example The following illustration is an example of the Setup Advanced Settings - MAC Filtering page.
4011533 Rev A 71 How Do I Configure t he Cable Modem Ga tewa y ? Setup Advanced Settings - MAC Filtering Page Description Use this page to enter the MAC address or MAC addresses of devices whose Int ernet access you want to control. Click Apply to apply and save your new MAC address filter settings.
72 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Setup Advanced Settings - Port Filtering Page Example The following illustration is an example of the Setup Advanced Settings - Port Filtering page.
4011533 Rev A 73 How Do I Configure t he Cable Modem Ga tewa y ? Configuring Port Forwarding for Local IP Addresses Use the Setup Advanced Settings - Port Forwarding page to configure port forwarding for local IP addresses. Port forw arding allows you to run a server on the LAN by specifying the mapping of TCP/UDP ports to a local PC.
74 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Setup Advanced Settings - Port Forwarding Page Example The following illustration is an example of the Setup Advanced Settings - Port Forwarding page.
4011533 Rev A 75 How Do I Configure t he Cable Modem Ga tewa y ? Setup Advanced Settings - Port Forwarding Page Description The following example illustrates how to use the port forwarding feature to configure the Microsoft X-Box Online Live for Internet gaming.
76 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Setup Advanced Settings - Port T riggers Page Example The following illustration is an example of the Setup Advanced Settings - Port Triggers page.
4011533 Rev A 77 How Do I Configure t he Cable Modem Ga tewa y ? Setup Advanced Settings - Port T riggers Page Description Use this page to enter and enable the port forwarding trigger and target range s tart and end ports along with protocol information in the appropriate fields.
78 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Setup Advanced Settings - DMZ Host Page Example The following illustration is an example of the Setup Advanced Settings - DMZ Host page.
4011533 Rev A 79 How Do I Configure t he Cable Modem Ga tewa y ? Setup Firewall - Options Page Example The following illustration is an example of the Setup Firewall - Options page.
80 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Setup Firewall - Opti ons Page Description This section describes the section headings and fields descriptions of the Setup Firewall - Options page.
4011533 Rev A 81 How Do I Configure t he Cable Modem Ga tewa y ? Field Name Description IP Flood Detection Blocks malicious d e vices that are attempting to flood devices or networks with illegal bro adcast packets. Also referred to as “broadc ast storm.
82 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Setup Firewall - Event Logging Page Example The following illustration is an example of the Setup Firewall - Event Logging page. Setup Firewall - Event L ogging Page Description The Setup Firewall - Event Logging page show s events captured by the firewall.
4011533 Rev A 83 How Do I Configure t he Cable Modem Ga tewa y ? Field Name Description Enable Email Address Allows you to enter the e -mail address of the person who monitors the firewall. When an event occurs, it will be logged and an email will be sent to this address automatically reporting the event.
84 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Configuring Parental Control Use the Setup Parental Control - User Setup page to configure parental controls on the cable modem gateway, and to add or delete the individuals who are authorized to set parental controls.
4011533 Rev A 85 How Do I Configure t he Cable Modem Ga tewa y ? Setup Parental Control - Us er Setup Page Description This section describes the section headings and fields descriptions of the Setup Parental Control - User Setup page. This pa ge allows you to set up user profiles.
86 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Field Name Description Content Rule Select the Content Rule for the curr ent user profile.
4011533 Rev A 87 How Do I Configure t he Cable Modem Ga tewa y ? Configuring Parental Control Basic Rules Use the Setup Parental Control - Basic Setu p page to select the rules that block certain Internet content and certain Web sites.
88 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Setup Parental Control - Basic Setup Page Example The following illustration is an example of the Setup Parental Control - Basic Setup page.
4011533 Rev A 89 How Do I Configure t he Cable Modem Ga tewa y ? Setup Parental Control - B asic Setup Page Description This section describes the section headings and fields descriptions of the Setup Parental Control - Basic Setup page. This pa ge allows you to create Internet access rules based on the content found in the URLs of Internet sites.
90 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Function Keys The following function keys appear on the Setup Parental Control - Basic Setup page.
4011533 Rev A 91 How Do I Configure t he Cable Modem Ga tewa y ? Configuring Parental Co ntrol Advanced Settings Use the Setup Parental Control - Advanced Settings page to c onfigure parental control rules that apply to the home network.
92 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Setup Parental Control - Advan ced Settings Page Description This section describes the section headings and fields descriptions of the Setup Parental Control - Advanced Settings page. Note: A subscription is required.
4011533 Rev A 93 How Do I Configure t he Cable Modem Ga teway? Configuring Parental Control T ime of Day Access Filters Use the Setup Parental Control - Time of Day Access Filter page to configure Web.
94 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Setup Parental Control - Ti me of Day Access Filter Page Example The following illustration is an example of the Setup Parental Control - Time of Day Access Filter page. Note: The cable modem gateway uses the network time of day clock that is manag ed by your data service provider.
4011533 Rev A 95 How Do I Configure t he Cable Modem Ga tewa y ? Function Keys The following function keys appear on th e Setup Parental Control - Time of Day Access Filter page. Key Description Add Allows you to add a new Time of Day access filter o r rule.
96 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Setup Parental Control - Event Log Page Example The following illustration is an example of the Setup Parental Control - Event Log page.
4011533 Rev A 97 How Do I Configure t he Cable Modem Ga tewa y ? Configuring Vir us Protection Use the Setup Virus Protection - Antiviru s Setup page to access a Web sit e that allows you to download a free evaluation copy of antivirus software.
98 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Configuring Y our Wireless Access Point Parameters Use the Setup Wireless - Basic page to co nfigure your wireless access point (WAP) parameters, included SSID and channel number.
4011533 Rev A 99 How Do I Configure t he Cable Modem Ga tewa y ? Setup Wireless - Ba sic Page Description This section describes the section headings and fields descriptions of the Setup Wireless - Basic page. Note: If you make changes in the Se tup Wireless - Basic page, click Apply to apply and save your wireless basic settings.
100 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Configuring Y our Wireless Ne twork Security and Encryption Parameters Use the Setup Wireless - Security page to configure your WAP wireless equivalent privacy (WEP) encryption keys and authentication.
4011533 Rev A 101 How Do I Configure t he Cable Modem Ga tewa y ? Setup Wireless - Security Page Example The following illustration is an example of the Setup Wireless - Security page. Setup Wireless - Security Page Description This section describes the section headings and fields descriptions of the Setup Wireless - Security page.
102 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Field Name Description Network Authentication Network Authentication allows only authorized users to gain acces s to your wireles s network. Only users with an authorized user name, password, or pre-shared key ar e allowed access to the wireless network.
4011533 Rev A 103 How Do I Configure t he Cable Modem Ga tewa y ? Field Name Description RADIUS Server Allows you to enter the IP address of the RADIUS server used for authentication and encryption key derivation. This field is used with 802.1x and WPA Net work Authentication.
104 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Field Name Description Shared Key Authentication Allows you t o determine is Sh ared Key Authentication is used in the network. Shared Key Authentication can be used when there is no other network authentication in the network.
4011533 Rev A 105 How Do I Configure t he Cable Modem Ga tewa y ? Field Name Description 128 Bit Keys 1 through 4 Select these keys for use with Encryption Mode set to 128-bit encryption. Enter 13- byte values for a Key. You do not have to set all four Keys.
106 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Function Keys Keys Description Generate WEP Keys Automatically gene rates four WEP keys based on the PassPhrase entry. Notes: For 64-bit WEP, four unique 64-bit WEP keys will be generated For 128-bit WEP, on ly one 128-bit WEP key w ill be generated.
4011533 Rev A 107 How Do I Configure t he Cable Modem Ga tewa y ? Setup Wireless - Advanced Page Example The following illustration is an example of the Setup Wireless - Advanced page.
108 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Field Name Description 54g Network Mode Allows you to optimize th e performance of your wireless network using one of the following option s: Max compatibility (factory default ) Allows the access point to interoperate with both 802.
4011533 Rev A 109 How Do I Configure t he Cable Modem Ga tewa y ? Field Name Description Beacon Interval Displays the time interval that the WAP uses to announce itself to remote devices. The Beacon Interval should be left at 100ms for complianc e with most cl ient cards.
110 4011533 Rev A How Do I Configure t he Cable Modem Ga teway? Setup Wireless Access Control Page Example The following illustration is an example of the Setup Wireless - Access Control page.
4011533 Rev A 111 How Do I Configure t he Cable Modem Ga tewa y ? Field Name Description Closed Network Allows you to disable or enable the network to access by wireless clients.
112 4011533 Rev A Having Difficulty? Having Difficulty? Common T roubleshoot ing Suggestions The modem does not register a cabl e connection The modem works with a standard, 75-ohm, RF coaxial cable. If you are using a different cable, your cable modem gateway will not function properly.
4011533 Rev A 113 Having Difficult y ? Q. How does the cable modem gateway connect to my computer? A. The cable modem gateway connects to the USB port or the 10/100Bas eT Ethernet port on your PC.
114 4011533 Rev A Having Difficulty? The modem does not register a cabl e connection Verify that you have followed the procedures in How Do I Troubleshoot My Internet Service Install ation? (on page 112). Your NIC card or USB interface may be malfunctioning.
4011533 Rev A 115 Tips for Improved Perfor mance Tips for Improved Performance Check and Correct If your cable modem gateway does not perform as expected, the following tips may help.
116 4011533 Rev A DPR2320 and EPR2320 Front Panel St atus Indicator Functions DPR2320 and EPR2320 Front Panel Status Indicator Functions Initial Power Up, Calibr ation, and Registration The following .
4011533 Rev A 117 DPR2320 and EPR2320 Front Panel Status Indicator Functions Normal Operations The following chart illustrates the appear ance of the cable modem front panel LED status indicators during normal operations.
118 4011533 Rev A DPR2320 and EPR2320 Front Panel St atus Indicator Functions Special Conditions The following chart describes the appearance of the cable m odem front panel status indicators during special conditions to show that you have been denied network access.
4011533 Rev A 119 DPR2325 and EPR2325 Front Panel Status Indicator Functions DPR2325 and EPR2325 Front Panel Status Indicator Functions Initial Power Up, Calibr ation, and Registration The following c.
120 4011533 Rev A DPR2325 and EPR2325 Front Panel St atus Indicator Functions Normal Operations The following chart illustrates the appear ance of the cable modem front panel LED status indicators during normal operations.
4011533 Rev A 121 DPR2325 and EPR2325 Front Panel Status Indicator Functions Special Conditions The following chart describes the appearance of the cable m odem front panel status indicators during special conditions to show that you have been denied network access.
122 4011533 Rev A Notices Notices T rademarks Scientific Atlanta is a registered tr ademark of Scientific-Atlanta, Inc. DPR2320, EPR2320, DPR2325, and EPR2325 are trademarks of Sc ientific-Atlanta, Inc. Cisco, Cisco Systems, and the Cisco Systems log o are registered trademarks of Cisco Systems, Inc.
4011533 Rev A 123 Notices FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with the FCC RF exposure guidelines, this equipment should be inst alled and operated with minimum distance of at least 7.
124 4011533 Rev A For Information For Information If Y ou Have Questions If you have technical questions, call SciCare ™ Broadband Services for assistance. Follow the menu options to speak with a se rvice engineer. Use the following table t o find the center in your area.
.
Scientific Atlanta, A Cisco Company 5030 Sugarloaf Parkway, Box 465447 Lawrenceville, GA 30042 770.236.5000 www.scientificatlanta.com Product and service availability subject to change without notice. © 2006 Scientific-Atlanta, Inc. All rights reserved.
An important point after buying a device Cisco Systems 4013371 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems 4013371 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems 4013371 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems 4013371 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems 4013371 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems 4013371, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems 4013371.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems 4013371. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems 4013371 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
