Instruction/ maintenance manual of the product 3750-X Cisco Systems
Go to page of 114
Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Catal yst 3750-X and 3560-X.
THE SPECIFICATION S AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITH OUT NOTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED.
iii Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 CONTENTS Preface vii Purpose vii Related Publication s vii Obtaining Documentation and Submitting a Serv ice Request viii .
Contents iv Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Management Ports 1-20 Ethernet Management Port 1-20 USB Mini-Type B Port 1- 21 Management Options 1-21 Network Co.
Contents v Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Connecting Devices to the Eth ernet Ports 2-27 10/100/1000 Ethernet Port Conn ections 2-28 PoE+ Port Connections 2-.
Contents vi Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Finding the Switch Serial Number 4-6 Replacing a Failed Data Stack Member (Catalyst 3750 -X Switches) 4-6 APPENDI.
Contents vii Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 I NDEX.
Contents viii Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01.
vii Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Preface Purpose This guide desc ribes the hardw are features of th e Catalyst 3750-X and 3560-X switches. It describes the physical and performance characteristics of each sw itch, explains how to install a switch, and pro vides troubleshooting i nformation.
viii Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Preface Information about Cisco SFP and SFP+ modules is av ailable from this Ci sco.com site: http://www .cisco.com/en/US/prod ucts/hw/module s/ps545 5/prod_installation_guides_l ist.
CH A P T E R 1-1 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 1 Product Overview The Catalyst 3750-X and 3560 -X series switches are Ethern et switches to which you can c.
1-2 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Switch Models Catalyst 3750-X-48T - S IP Base image 3 48 10/100/1000 Et hernet ports, StackW i.
1-3 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description Front Panel Description The switch front panel includ es a USB T ype B console port, the 10/100/ 1000 Ethernet ports or th e 10/100/1000 PoE+ p orts, the network modu le, and the switch LEDs.
1-4 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description • Config uration for StackPo wer PoE+.
1-5 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description For informati on about the network modules, see the “Installing a Netw ork Module in the Switch” section on page 2-23 .
1-6 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description Ta b l e 1 -4 Cisco SF P Modules Supp ort ed for the 3750-X and 3560-X.
1-7 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description l D WDM-SFP-4373= D WDM SFP 1543.73-nm SFP (100 GHz ITU grid) D WDM-SFP-4453= D WDM SFP 1544.53-nm SFP (100 GHz ITU grid) D WDM-SFP-4532= D WDM SFP 1545.
1-8 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description For information about SFP modules, see your SFP module documentation and the “Installing SFP and SFP+ Modules” se ction on page 2-25 .
1-9 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description System LED For information on th e System LED colors during po wer -on self-test (POST), see the “Diagnosing Problems” secti on on page 4-1 .
1-10 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description When you press the Mode b utton on any switch in the Catalyst 37 50-X switch stack, all the stack switches change to show the same selected mode.
1-11 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description USB Console LED The USB console LED shows whether there is an acti ve USB connection to the port. DUPLX (duplex) Of f Port is operating in half duple x.
1-12 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description S-PWR LED (Catalyst 3750-X) Master LED (Catalyst 3750-X) Stack LED (Catalyst 3750-X) The stack LED sho ws the sequence of member switches in a stack.
1-13 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description Figur e 1- 3 S t a c k L E D When you select the Stack LED mode, the represen tati ve Stack LEDs are green when the StackWise ports are up, and the representativ e Stac k LEDs are amber when the ports are down.
1-14 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Front Panel Description Network Module LEDs Figur e 1 -4 Netw ork Module LE Ds (1 0-Gigabit N.
1-15 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Rear Panel Description Rear Panel Description The switch rear panel has a ground connec tor ,.
1-16 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Rear Panel Desc ription RJ-45 Console Port LED USB Type A Interface The USB T ype A interface provides access to extern al USB FLASH devices (also kno wn as thumb driv es or USB keys).
1-17 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Rear Panel Description • CAB-ST A CK -50CM-NH= (0.
1-18 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Rear Panel Desc ription Note A 48-port switch with o ne 715-W power sup ply provides up to 8.7 W of PoE to all ports. The po wer supply modules ha ve two status LEDs.
1-19 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Rear Panel Description For in formation about replacing a power sup ply module, wiring a DC p.
1-20 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Rear Panel Desc ription The nine ports on th e XPS-2200 provide the power an d management signals to the Catalyst 3750-X and 3560-X switches. Ot her switch models do not su pport this management communication.
1-21 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 1 Product Overview Management Options USB Mini-Type B Port The switch provid es a USB mini-T ype B console connection on the front pan el, and the RJ-45 console port on the swi tch rear panel.
1-22 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 1 Product Overview Management Options • Cisco IOS CLI Y ou can configure and mon itor the switch and swit ch cluster members from the CLI.
CH A P T E R 2-1 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 2 Switch Installation This chapter de scribes how to instal l and connect a Catalyst 3750-X or a 3560-X switch. It also includes planning and cabling con siderations for stacking sw itches (only Catalyst 3750-X switches).
2-2 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Preparing for Installation War ni ng T o prevent the switch from overheating , do not operate it in an area that exceeds the maxim um recommended ambient temperature of 113•F (45•C).
2-3 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Preparing for Installation War ni n g Ultimate disposal of this product should be handled according to all national laws and regulations.
2-4 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Planning a Switch Data Sta ck (Catalyst 3750-X Switches) • When connecting or disconnect.
2-5 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Data Stack Cabling Configurations Switch Data Stacking Guidelines For general concep ts and managem ent procedure s for switch stacks, se e the switch software confi guration guide on Ci sco.
2-6 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Data Stack Cabling Co nfigurations Figur e 2-1 Data Stac king the Switches in a Rack or on a T able Using the 0.5-met er StackWise Cable The configuration e xamples in Figure 2-2 use a 3-mete r StackW ise cable a nd the supplied 0.
2-7 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Data Stack Cabling Configurations Figure 2-3 sho w s a recommended conf iguration when the switches are mounted si de-by-side. Use the 1-meter and the 3-meter StackW ise cables to conn ect the switches.
2-8 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Planning a StackPower Sta ck (Catalyst 3750-X Switches) Figur e 2-7 Example of a P artitio.
2-9 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation StackPower Cabling Configurations For general concept s and manageme nt procedures fo r switch power stacks, se e the switch software confi guration guide on Ci sco.
2-10 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n StackPow er Cabling Configuration s Figur e 2-8 StackP ower Cable f o r Use Only with Cat.
2-11 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation StackPower Cabling Configurations Y ou can co nfigur e a ring po wer stack or use the XPS-220 0 to conf igure a star topology . Figure 2-10 sho ws a ring conf iguration using bo th of the supplied 0.
2-12 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n StackPow er Cabling Configuration s Figur e 2-1 1 StackP ow er Star T opology Using the XPS-2200 Figure 2-12 shows a nine-switch data stack configured with three power stacks.
2-13 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation StackPower Cabling Configurations Figur e 2-12 P ower Stacking Catalyst 3750-X Sw itches within a Switch D ata Stack Figure 2-13 and Figure 2-14 are e xamples of recommended con f igurations when the switches are mounted side-b y-side.
2-14 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Installing the Switch StackPower Partitioning Examples Figure 2-15 and Figure 2-16 sho w StackPower stacks of Catalyst 3750-X swit ches with failo ver conditions.
2-15 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Installing the Switch Installing the switch in ot her rack types requires an option al bracket kit not included with the switch. Figure 2-17 sho ws the standard 19-inch brackets and option al mounting bracke ts and part numbers.
2-16 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Installing the Switch Figur e 2-1 7 Rac k-Mou nting Brac k ets 1 19-inch bracket s, part .
2-17 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Installing the Switch Attaching the Rack -Mount Brackets T o install the switch in a rack,.
2-18 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Installing the Switch Mounting the Switch in a Rack After the brackets are attached to the switch, use the supp li ed Phillip s machine screws to attach the brackets to the rack ( Figure 2-1 9 ).
2-19 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Installing the Switch Figur e 2-19 Mounting the S witch in a Rack 1 Phillips machine scre .
2-20 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Installing the Switch When you complete the switch installatio n, see the “ After Installing the Sw itch” section on page 2-21 for more information abo ut switch configu ration.
2-21 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Connecting to the St ackWise Ports (Catalyst 3750-X Switches) After Installing the Switch After the switch is installed, you might need to: • Config ure the switch by runni ng Express Setup to enter the init ial switch conf iguration.
2-22 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Connecting to the Stac kPower Ports (Catalyst 3750-X Switches) Caution Removing and in stalling the StackW ise cable can shorten its useful life.
2-23 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Connecting the StackPower Ports to the XPS-2200 Connecting the StackPower Ports to the XPS-2200 Before connecting the Stac kPower cables, re view the “Planning a StackPower Stack (Catalyst 3750-X Switches)” section on page 2-8 .
2-24 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Installing a Network Module in the Switch Use only Cisco network modules and SFP or SF P+ modules with the switch. For informati on about supported SFP modules, see the “SFP and SFP+ Modules” section on page 1-5 .
2-25 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Installing SFP and SFP+ M odules Figur e 2-25 Installing the Networ k Module in the Switc h Caution Do not install the con verter module with connected SFP modules or ca bles.
2-26 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Installing SFP and SFP+ Modules Installing an SFP Module Observe these general p recautions: War ni ng Class 1 laser product.
2-27 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Connecting De vices to the Ethernet Ports Figur e 2-27 Networ k Module with SFP Modules Installed Removing an SFP Module Step 1 Attach an ESD-pre ventiv e wrist strap to your wrist and to a bare metal surf ace.
2-28 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Connecting Devices to the Eth ernet Ports 10/100/1000 Ethernet Port Connections The 10/100/1000 Ether net ports use RJ-45 connectors with Ethernet pi nouts.
2-29 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 2 Switch Installation Where to Go Next Y ou can use this application to calculate the power su pply requirements for a specific PoE conf iguration.
2-30 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 2 Switch Installatio n Where to Go Ne xt • Use the CLI to configure the switch as a member of a cluster or as an i ndivi dual switch from the console. See the switch command reference on Cisco.
CH A P T E R 3-1 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 3 Power Supply and Fan Module Installation • Po wer Supply Module Overvi ew , page 3-1 • Installation Gu.
3-2 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 3 Power Sup ply and Fan Module Installatio n Power Supply Module Overview Note A 48-port switch with o ne 715-W power sup ply provides up to 7.7 W of PoE to all ports.
3-3 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 3 Power Supply and Fan Module Installation Power Supply Modu le Overview Each A C power su pply module has a po wer cord for connection to an A C po wer outlet. The 1100-W and 715-W modules use a 16-A WG cord (only Nort h America).
3-4 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 3 Power Sup ply and Fan Module Installatio n Power Supply Module Overview Figur e 3-3 350-W AC P ow er Supply Mod.
3-5 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 3 Power Supply and Fan Module Installation Installation Guidelines Figur e 3-5 P ower Supply Slot Cov er The po wer supply modules ha ve two status LEDs. Installation Guidelines Ta b l e 1-16 lists the switches and the comp atible power - supply mod ules.
3-6 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 3 Power Sup ply and Fan Module Installatio n Installing an AC Power Supply • Y ou can remove and replace the po wer supply when the switch is connected to an XPS-2200 witho ut interrupting normal switch operation.
3-7 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 3 Power Supply and Fan Module Installation Installing a DC Power Supply Caution Do not lea ve the po wer-supply slot op en for mo re than 90 seconds whi le the switch is operating.
3-8 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 3 Power Sup ply and Fan Module Installatio n Installing a DC Power Supply War ni ng An exposed wire lead from a DC-input power source can condu ct harmful levels of electricity .
3-9 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 3 Power Supply and Fan Module Installation Installing a DC Power Supply Grounding the Switch Follo w the grounding procedures at yo ur site and observ e these warnings: War ni n g This equipment must be grounde d.
3-10 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 3 Power Sup ply and Fan Module Installatio n Installing a DC Power Supply Step 5 Use the ground scre w to attach the single-ground lug to the switch rear pan el. Use two ground scre ws to attach the dual-hole lug to the switch rear panel ( Figure 3-10 ).
3-11 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 3 Power Supply and Fan Module Installation Installing a DC Power Supply Figur e 3-1 1 Inserting the DC P ow er Supply in the Switch Step 6 Connect the input po wer as described in the “W iring the DC Input Po wer Source” section.
3-12 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 3 Power Sup ply and Fan Module Installatio n Finding the Power Su pply Module Serial Number Figur e 3-13 DC Source A and Source B Connections with Common Ground Step 4 T orque all terminal block scre ws to 11 lbf-in.
3-13 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 3 Power Supply and Fan Module Installation Finding the Power Supply Modu le Serial Number Figur e 3-15 715-W and.
3-14 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 3 Power Sup ply and Fan Module Installatio n Fan Module Overview Figur e 3-16 440-W DC P ower Supply Module Ser ial Number Fan Module Overview The switch has two f an modules.
3-15 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 3 Power Supply and Fan Module Installation Installing a Fan Module Installin g a Fan Module Note There must be a fan module in bot h fan module sl ots. Step 1 Pinch the fa n release handle, and slide the f an out.
3-16 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 3 Power Sup ply and Fan Module Installatio n Finding the Fan Module Serial Number Figur e 3-19 F a n Module Seri.
CH A P T E R 4-1 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 4 Troubleshooting • Diagnosing Problems, page 4- 1 • Resetting the Switch to the F actory Default Settin.
4-2 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 4 Tro ubleshooting Diagnosing Prob lems Switch Connections Bad or Damaged Cable Always e xamine the cable for marginal damage or fa ilure.
4-3 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 4 Troubleshooting Diagnosing Problems 10/100/1000 Port Connections A port appears to malfun ction: • V e rify the status of all ports. See Ta b l e 1-8 on page 1-10 for descriptions of the LEDs and their meanings.
4-4 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 4 Tro ubleshooting Diagnosing Prob lems Note When ordering or using CX1 cables, ensure that t he version identif ier is 2 or higher .
4-5 Catalyst 3750-X and 3560-X Switch Hardware Installati on Guide OL-19593-01 Chapter 4 Troubleshooting Resetting the Switch to th e Factory Default Settings Autonegotiation and Ne twork Interface Cards Problems sometimes occur between the switch and thi rd-party network in terface cards (NICs).
4-6 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Chapter 4 Tro ubleshooting Finding the Swit ch Serial Number Finding the Switch Serial Number If you contact Cisco T echnical Assistance, yo u need to know the sw itch serial number .
A-1 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 APPENDIX A Technical Specificatio ns • Switch Specifications, page A-1 • Po wer Supply Module Specif ications, page A-.
A-2 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix A Technical Specific ations Power Supply Module Specifications Power Supply Module Specifications W eight Cataly.
A-3 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Appendix A Technical Specifications Power Supply Modu le Specifications W eight C3KX-PWR-1100W AC C3KX-PWR-715W AC C3KX-PWR-350W AC C3KX-PWR-440WDC 3 lb (1.4 kg) 2.8 lb (1.3 kg) 2.
A-4 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix A Technical Specific ations Fan Module Specifications Fan Module Specifications Ta b l e A -4 Po wer Specificati.
A-5 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Appendix A Technical Specifications Fan Modul e Sp ecifications Ta b l e A -6 Standards and Cer tifications Description Sp.
A-6 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix A Technical Specific ations Fan Module Specifications.
B-1 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 APPENDIX B Connector and Cab le Specifications • “Connector Specifications” section on page B-1 l • “Cable and A.
B-2 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix B Connec tor and Cable Specific ations Connector Specifications 10 Gigabit Ethernet CX1 (SFP+ Copper) Connectors The 10-Gigabit Ethernet electrical modul es use CX1 copper connectors similar to the one sho wn in Figure B-2 .
B-3 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Appendix B Connector and Cable Specifications Connector Specifications Figur e B-4 Simplex LC Cabl e Connect or Figur e B-.
B-4 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix B Connec tor and Cable Specific ations Connector Specifications Figur e B-7 1 0/ 1 0 0 P ort Pinouts Console Port The switch has t wo console ports: a US B 5-pin mini-T ype B port on t he front panel (see Figure B-8 ) and an RJ-45 console port on the rear panel.
B-5 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Appendix B Connector and Cable Specifications Cable and Adapter Specification s The RJ-45 console port uses an 8-pin RJ-45 connecto r (See Ta b l e B-2 and Ta b l e B-3 .
B-6 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix B Connec tor and Cable Specific ations Cable and Adapter Spec ifications 1000B ASE-T (GLC-T) Standard 4 twisted-pair Categor y 5 cable — — — 328 feet (100 m) 1000B ASE-LX/LH (GLC-LH-SM) 1310 MMF 3 SMF 62.
B-7 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Appendix B Connector and Cable Specifications Cable and Adapter Specification s Four Twisted-Pair Cable Pinouts Figur e B-.
B-8 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix B Connec tor and Cable Specific ations Cable and Adapter Spec ifications Figur e B-13 T w o T wisted-P air Crossov er Cable Schematic Identifying a Crossover Cable T o identify a crosso ver cable, hold the cable ends side-b y-side, with the tab at the back.
B-9 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Appendix B Connector and Cable Specifications Cable and Adapter Specification s Ta b l e B-3 lists the pinouts fo r the console port, RJ-45-to-DB-2 5 female DTE adapter , and the console device.
B-10 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix B Connec tor and Cable Specific ations Cable and Adapter Spec ifications.
C-1 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 APPENDIX C Configuring the Switch with the CLI-Based Setup Program This appendix pro vides a CLI-bas ed setup procedure for a Catalyst 3750-X and 3 560-X standalone switch or a switch stack.
C-2 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix C Config uring the Switch with the CLI-Based Setup Program Accessing the CLI Note If you ha ve stack ed Catalyst 3750- X switches, connect to the 10/100 Ethernet managemen t port or console port of one of the stack sw itches.
C-3 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Appendix C Configuring the Switch with the CLI-Based Setup Pro gram Accessing the CLI Figur e C-1 Connecting the USB Console Cable to the Catalyst 3750-X or 3560-X Sw itch Step 2 Connect a US B cable to t he PC US B port .
C-4 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix C Config uring the Switch with the CLI-Based Setup Program Accessing the CLI Installing the Cisco Microsoft Windows XP USB Driver Step 1 Obtain the f ile Cisco_usbconsole_dri ver .
C-5 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Appendix C Configuring the Switch with the CLI-Based Setup Pro gram Accessing the CLI Note If a User Account Control warnin g appears, click Allow - I trust this pr ogr am to proceed.
C-6 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix C Config uring the Switch with the CLI-Based Setup Program Entering the Initial Con figuration Information Uninstalling the Cisco Microsoft Windows Vista and Windows 7 USB Driver Note Disconnect the switch console termin al before uninstalling the driv er .
C-7 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 Appendix C Configuring the Switch with the CLI-Based Setup Pro gram Entering the Initial Configuration Information Would you like to enter the initial configuration dialog? [yes/no]: yes At any point you may enter a question mark '?' for help.
C-8 Catalyst 3750-X and 3560-X Switch Hardware Inst allation Guide OL-19593-01 Appendix C Config uring the Switch with the CLI-Based Setup Program Entering the Initial Con figuration Information If you enter N , the switch appears as a candidate switch in the Network Assistant GUI.
IN-1 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 INDEX Numerics 10/100/1000 p orts cable lengths 1-3, 2-28 connecting to 2-28 described 1-3 pinouts B-1 recommended cables.
Index IN-2 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 crossover cable See cables D DC power power-supply modul e described 1-17 specifications A-4 DC power warn ing 3-8 .
Index IN-3 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 J jewelry removal warnin g 2-2 L LEDs color meanings 1-9 duplex 1-10 front panel 1-8 to 1-14 interpreting 1-9 maste.
Index IN-4 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 PoE+ (continued) troubleshooting 4-3 port and interface trou bleshooting 4-4 port LEDs 1-9 to 1-12 port modes chang.
Index IN-5 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01 SunNet Manager 1-22 switch models 1-1 system LED 1-9 T table-moun ting 2-20 technical specifications A-1 telco rac .
Index IN-6 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-01.
An important point after buying a device Cisco Systems 3750-X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems 3750-X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems 3750-X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems 3750-X you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems 3750-X will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems 3750-X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems 3750-X.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems 3750-X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems 3750-X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
